BRESSER SA-1000A LED with battery pack 100W - 3200/5600K
Currently not available
Product number:
F003199
EAN:
4007922051833
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER SA-1000A LED with battery pack 100W - 3200/5600K"
The BRESSER SN-1000A LED Studio lamp has an adjustable colour temperature 3200K to 5600K and a maximum power of 100W (comparable to 1000W of a halogen lamp). The power can be adjusted continuously between 0 and 100% on the back of the lamp, the set power can be read on a digital display. Additionally the studio lamp is equipped with a built-in cooling. The lithium-ion battery is integrated, so the lamp can be easily used on the road!
The SN-1000A LED lamp has a S-bayonet mount so that all optionally available accessories with S-bayonet mount can be attached. Apart from all that the lamp disposes of an integrated receiver, so that in combination with an optionally available remote control it can be controlled over a distance of up to 60 meters on 9 different channels.
FEATURES
The SN-1000A LED lamp has a S-bayonet mount so that all optionally available accessories with S-bayonet mount can be attached. Apart from all that the lamp disposes of an integrated receiver, so that in combination with an optionally available remote control it can be controlled over a distance of up to 60 meters on 9 different channels.
FEATURES
- Studio lamp with Power LEDs, comparable to 1000W halogen
- low heat emission and energy saving
- 100.000 burning hours
- Power continuously adjustable between 0 and 100%
- S-bayonet mount for attaching accessories
- built-in cooling
- Support for studio umbrellas
- tiltable, universal tripod connection (Ø 5/8“ without thread; locking screw)
- Studio lamp
- Reflector (diameter 17.5 cm)
- Diffusue filter (magnetic attachment)
- Power cable
- Spare fuse
- Manual
| Batteries included: | No |
|---|---|
| Batteries required: | Yes |
| Flash counter: | No |
| Flash lamp: | No |
| Illuminant: | LED |
| LED modelling lamp: | No |
| Lamp included: | No |
| Metal reflector: | No |
| Overheat protection: | No |
| Photo cell: | No |
| Protection cap: | No |
| Synchro flash cord included: | No |
| Tilt head with tripod connection: | No |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Risk of overheating! Ensure adequate air circulation.
- Avoid moisture! Do not use the device in damp or wet environments.
- Risk of burns! Lamps can become hot – allow them to cool fully before replacing.
- Electrical safety! Use only the recommended power source and regularly check cables for damage.
- Stable positioning required! Ensure tripods are securely set up to prevent tipping over.
- Fire hazard! Keep flammable materials away from lighting.
- Eye protection! Do not look directly into the lamp to avoid eye damage.
- Switch off before cleaning! Turn off the device and let it cool before cleaning with a dry cloth.
- Store dust-free! Keep in a dry and clean place.
- Follow intended use! Use the device only for its designated purpose and according to the instructions.
- Ensure child safety! Keep out of reach of children to prevent fire or impact hazards.
- Risk of pinching! Be cautious with moving parts such as adjustable tripods and clamps.
- Safe transport! Pack the product carefully to minimise damage during transit.
- Prevent heat damage! Extreme heat or cold can shorten the lifespan of the lamp.
