BRESSER Science ETD 101 7-45x Zoom Stereo-Microscope

The zoom stereo microscope BRESSER Advance ICD is suitable for a wide variety of objects. Because of the Greenough design with two tilted objectives, you can view the sample in 3D. The three-dimensional view is also very helpful when working under the microscope, e.g. when soldering, dissecting or preparing a sample.The precise zoom enables you to view your sample in a wide range of magnifications from 1x to 4x (zoom ratio 4.0). When zooming, only slight refocussing is necessary. To do this, the Advance ICD microscope is equipped with a very precise, coaxial coarse and fine focus. The fine focus is especially helpful when using high magnifications or for imaging. When doing focus stacking with our MikroCam cameras (optional) the fine focus is also a big help.The interpupillary distance of the eyepiece pair is adjustable. Both eyepiece holders are equipped with diopter adjustment, which allows users with bad eyesight to compensate up to 8 dpt. difference between left and right eye. The 10x wide field eyepieces have field number (FN) 22 and are equipped with soft rubber eyecups. The microscope head can be moved on the long rod of the stand, which allows you to observe big samples up to a size of 22 cm.The angle of the bright LED reflected light illumination can be adjusted as necessary. The extra bright and even LED transmitted light provides a flat background when viewing transparent samples. The switch allows you to select reflected light, transmitted light or a combination of both to match your requirements. Brightness is adjustable with the dimmer. The bright light does not heat up, which allows you to observe also living specimens over a longer period of time. The long lasting LED is powered by a 5V AC adapter (EU/UK). The power cable comes with a USB plug.Fully equipped, the Advance ICD covers an exceptionally wide range of magnifications and is therefore suitable for a variety of tasks. Besides the included 2x lens there is also a selection of other auxiliary objectives available. With these, you are able to adjust magnification, working distance and depth of focus according to your needs.Magnifications in basic setting (no optional accessories):10x eyepieces: 10x – 40x10x eyepieces plus 2x auxiliary lens: 20x – 80x20x eyepieces: 20x – 80x20x eyepieces plus 2x auxiliary lens: 80x – 160x(other magnifications are possible when using other auxiliary lenses and/or eyepieces)The third tube is designed to permanently attach a camera. The image of the left eyepiece is diverted to the camera port with a lever/switch. We supply a selection of camera adapters for DSLR, mirrorless cameras and c-mount microscope cameras. This enables you to attach virtually any camera body as long as you have a model with interchangeable lens.APPLICATION RANGEQuality control in industryMaterials scienceLaboratoryBotany, gardening, farmingHydrology, aquaculture, fishkeepingInsects, Entomology, pest controlPlant physiology, raw food materials, medicinal herbsSchools, teachingFEATURESTrinocular head with 2 eyepieces and camera port with switchCompatible with BRESSER MikroCam cameras and others1x-4x stereo-zoom head2x auxiliary lensDiopter adjustment on both eyepiece holdersAdjustable interpupillary distance (52 – 72 mm)Bright LED light (reflected / transmitted)2 different object plates for best contrastView samples of up to 22 cm heightAC adapter Euro/UK (5V / 1000 mA) with USBHeavy build with metal standIncludes 2 pairs of widefield eyepiecesSCOPE OF DELIVERYMicroscope2 pairs of eyepieces (WF 10x / WF 20x)2x auxiliar lens (1 pcs)1 pair of rubber eyecupsObject plate 94 mm (black / white)Glass object plate 94 mm (matte)AC adapter Euro/UK (5V / 1000 mA)Dust coverPrinted manual

The BRESSER Science ETD-201 is a high-quality stereo reflected-light and transmitted-light microscope. It is perfectly qualified for medical applications, the use in agriculture and forestry, in criminology, in academic and scientific institutes and schools, as well as for the assembly and quality assurance of components in precision mechanics and electronic engineering. The extra wide foot with stage and exceptionally tall height range permit observations of large objects. The integrated reflected- and transmitted-light illumination can be used in combination and is dimmable. The angle of incidence can be user-friendly adjusted and locked in position. A continuous range of magnification from 8x to 50x is possible with the exchangeable wide field eyepieces (WF 10x) and the 6.25-times stereo zoom objective lens (0,8x-5x).The interpupillary distance and dioptre compensation can be adjusted individually. The trinocular microscope head is rotatable (360°) and comes with two 45° inclined eyepiece tubes and a separate camera tube for the attachment of a c-mount camera or MikroCam.SCOPE OF DELIVERYMicroscope zoom headMicroscope stand2x eyepiece (WF 10x)Glass platePlastic plate (black & white)Dust coverManual

The Analyth STR Trino has 3 different objective magnifications that can be changed simply by turning the objective. This means that the magnifications 10x, 20x and 40x can be changed directly. The stereo design shows structured objects particularly vividly and three-dimensionally. The low,10x initial magnification is particularly suitable for working with children. Objects up to 20mm in size can be viewed in their entirety. The Analyth STR is therefore particularly flexible to use. It is suitable for insects, plants, minerals and much more and has its areas of application in hobby, school and work. The stereomicroscope can be used for quality control, in horticulture and agriculture, for hydrology and much more. The trinocular tube enables the comfortable connection of a camera. The microscope is compatible (depending on the adapter) for microscope cameras, SLR and system cameras. Ask us which adapter you need. The interpupillary distance and dioptric compensation are individually adjustable. The eyepieces have a large field of view of 20mm. They are equipped with removable rubber eyecups and secured against removal. The microscope can be powered either with the mains adapter or with 3 batteries (not included). This means that it can also be used on the move, for example outside in the garden or on an excursion. PROPERTIES Microscope with 3 pairs of objectives, objective magnifications 1x; 2x; 4x Wide field eyepieces with eyecups and 20mm field of view Trinocular tube with 23.2mm mount Bright, economical LED illumination Illumination for incident and transmitted light can be switched separately Dimmer via membrane keys with status display Two specimen plates (black/white or glass matt), with specimen clips Dust cover Operating instructions Stand with LED illumination, separately or jointly switchable or dimmable SCOPE OF DELIVERY Microscope with 3 magnifications, 10x; 20x; 40x Trinocular tube Metal stand with LED illumination, power supply and battery compartment 2 eyepieces with rubber eyecups Glass object plate Plastic object plate (black/white) Dust cover Operating instructions

The BRESSER DST-0745 is a special microscope that is operated with a c-mount camera (camera not included). This allows direct viewing on a screen. Due to the vertically installed optics, there is no shifting of the image when focusing. This is especially useful for "focus stacking" shots. The zoom is continuously adjustable from 0.7x - 4.5x. A coarse and fine focus adjustment facilitates focusing, especially at high magnifications. The convenient and user-friendly operation makes the digital microscope particularly suitable for daily use in the workshop. Measurements, quality control of surfaces or inspection of components and raw materials are easy with the workshop microscope. Insects, plants and rocks are also impressively displayed. The DST-0745 workshop microscope is not suitable for visual observation. It can only be used in combination with a MikroCam c-mount microscope camera. It is designed for camera sensors of about 1/2". Smaller sensors can be used without problems. With larger sensors there is vignetting, which becomes somewhat less at higher magnifications. Due to the two flexible incident light lamps, the light can be optimally positioned. The transmitted light illumination helps when observing transparent objects. The brightness of both illuminators can be adjusted in five steps. The magnification of a USB camera differs from the magnification of the lens. It depends, among other things, on the sensor size and the display on a monitor. It can be compared to macro lenses with macro factor 0.7:1 up to 4.5:1. Compatible MikroCam cameras: 5914131 MikroCam SP 1.3 MP 5914320 MikroCam SP 3.1 MP 5914520 MikroCam SP 5.0 MP 5914004 MicroCamII 5914020 MicroCamII 5914310 MicroCamII 5914912 MicroCamII 5914180 MikroCam PRO HDMI 5914190 MikroCam PRO HDMI 5MP 5914195 MikroCam Pro HDMI Autofocus FEATURES: Designed for C-mount microscope cameras Up to 1/2" sea sensor size Continuous zoom (0.7x - 4.5x) Two flexible incident light LED lamps LED transmitted light illumination Adjustable brightness SCOPE OF DELIVERY: Zoom lens head 0.7x - 4.5x Stand with incident and transmitted light illumination Object plate glass (one side frosted) Object plate plastic (one side white, one side black) Power supply unit, operating instructions, dust cover

The BRESSER Science ETD-301 is a stereo incident light and transmitted light microscope with high-quality optics.It is suitable for use in medicine, agriculture, forestry, forensics, scientific research institutes and schools as well as for the assembly and inspection of small components in precision mechanics and electronics.The particularly wide base with object table enables the viewing of larger objects. The maximum object height is approx. 85 mm. The large working distance of 100 mm allows working with tools, e.g. for dissecting, measuring or testing.The instrument has an LED incident light and a transmitted light illumination, which can be used individually or combined and each can be infinitely adjusted. The incident light angle can be adjusted in a particularly user-friendly way. With interchangeable wide-field eyepieces (WF10x) and a 9x stereo zoom lens (0.7x-6.3x), a continuous magnification range from 7x to 63x is realised.The coarse and fine focusing allows precise focusing, especially at high magnifications and in photography.The interpupillary distance and dioptric compensation are individually adjustable. The trinocular microscope head can be rotated 360° and has two 45° inclined eyepiece tubes.The trinocular tube can carry an SLR/system camera (APS-C or DX format) or a c-mount camera (sensor size up to 1") using an optional adapter. By means of a switch, the beam path of one eyepiece is deflected towards the camera. This provides 50% more light than a microscope with a permanent beam splitter.To connect an SLR or system camera, the adapter with item no. 5942100 and a camera-specific T2 ring are required.A c-mount camera is connected with the optional adapter item no. 5942101. FEATURESWF 10x eyepieces with 22 mm field of view (referring to a 1x objective)Large, continuous 9x zoom (7x - 63x magnification)With optional adapter suitable for SLR/system cameras and c-mount camerasTripod with coarse and fine focusSCOPE OF DELIVERYMicroscope zoom headLED microscope standWF 10x eyepieces with 22mm field of view (2 pieces)Translucent plastic object plateAC adapter (12V 3A)dust cover

The New BRESSER Science TFM-201 is a binocular microsscope, which is equipped with semiplan objectives. The WF 10x eyepieces offer a large visual field of 20mm. The interpupillary distance can be adjusted from ca. 55mm to 75mm. Dioptre adjustments are possible with both eyepieces.The Köhler illumination is regulable with the built-in luminous-field diaphragm and the vertically and horizontally adjustable Abbe condenser (numerical aperture 1.25, with iris diaphragm). An imprint of the different possible magnifications on the condenser makes the adjustment of the iris diaphragm very fast and precise.Coaxial pinions drive the stage and focus which enables ergonomic operation of the microscope.SCOPE OF DELIVERYMicroscope with integrated LED illuminationsemiplan objectives (4x, 10x, 40x, 100x oil)2x eyepieces (WF 10x)Immersion oilDust coverMains adapterManual

The Analyth STR comes with 3 different magnifications, that can easily be switched by turning the objective. It is easy to change magnifications from 10x to 20x or 40x. The stereo microscope will show structured objects nicely in 3D, which is especially impressive. The low starting magnification of 10x is helpful when working with children and will show objects in full up to a size of 20mm. With the wide magnification range, the Analyth STR is a versatile instrument. You can use it to view insects, plants, minerals and much more. It is useful for hobbyists, in schools and more. Typical professional applications include quality control, gardening or farming (pest control), hydrobiology and much more.The interpupilllary distance and the diopters can be adjusted to your needs. The eyepieces feature a big field of view of 20mm. They are equipped with rubber eyecups and have a locking screw to prevent loss or damage during transport.The power supply can be achieved through the AC adapter or with a set of 3 AA type batteries (batteries not included). This makes the microscope  perfect for mobile use, e.g. outside in the garden or for biology field work. FEATURES Microscope with 3 pairs of objectives, magnifications 10x; 20x; 40x Wide field eyepieces with eyecups and 20mm field of view Bright, economical LED illumination, angle adjustable Illumination for incident and transmitted light can be switched separately Dimmer operation via a foil switch with status display Two specimen plates (black/white or glass matt), with specimen clips SCOPE OF DELIVERY Microscope with 3 objective magnifications 1x; 2x; 4x Metal stand with LED illumination, power supply and battery compartment 2 eyepieces with rubber eyecups Glass object plate Plastic object plate (black/white) Dust cover Operating instructions