BRESSER Science MTL 201 50-800x Microscope

In the microscope's basis, there are a transmitted light LED illuminator (3 W) as well as the power supply and the continuous adjustable dimmer for transmitted light. The trinocular head allows to mount a SLR camera or a USB microscope camera with an optional adapter. The inclination of the eyepiece tubes is 30°. The fluorescence attachment includes a special LED wheel with four different lamps (green, blue, violett, ultraviolett), a filter wheel and a radiation shield. The LED lamps produces the exciting radiation in order to get fluorescence. Fluorescence microscopy is done e. g. in biology, medicine, microchemistry, geology, semiconductor production and environmental protection. The Science ADL 601F LED is an instrument with an excellent value for money. It has also the other features, which are typical for high-quality microscopes: fourfold objective nosepiece, lengthwise and cross moveable stage, coaxial focusing knobs (concerning fine drive: 200 µm / full turn), adjustment of eye relief, diopter adjustment and the phototube. Optional available, general accessories are the wide field eyepieces (WF10x, WF15x), the dividing eyepiece (WF10x), and dark field condensers (dry and oil). FEATURESType: biology MicroscopeView: TrinocularApplication range: Biology, Gemology, Botany, Education, Teaching, Entomology, Forensic, Research, Laboratory, Medical science, Pathology, Veterinary medicineIllumination:  LEDLevel: Intermediate, ExpertWarranty: 2 years1.25 Abbe-condenser with iris diaphragm and filter holderIncl. adjustable mechanical stage Integr. dimmerAdjustable eye reliefDiopter adjustment SCOPE OF DELIVERYMicroscope4 DIN-objectives (PL 4x, PL 10x, PL 100x oil, PL-FL 40x)2x 10x eyepieces 1.25 Abbe-condenser with iris diaphragm and filter holderFluorescence attachment with LED wheel (green, blue, violett, ultraviolett) and respective emission filtersImmersion oilFull Koehler illumination for transmitted light

At the BRESSER Science IVM 401, the usual direction of illumination and observation is inverted: One illuminates the sample from above and observes it from below. This type allows for the microscopy of sediments and transparent living organisms, which are found at the bottom of a liquid medium. For example, plankton or protozoa at the ground of culture bottles, which should not turned over, can be investigated. So, this special microscope is suitable for public water departments, research institutes and universities, for medical treatment, animal husbandry, agriculture, limnology etc. The Science IVM 401 has a large fixed object plate with stage moving system, a powerful halogen bulb illumination (30 W) with dimmer and field diaphragm, and a fourfold nosepiece. The trinocular head is turnable and bears 30° inclined eyepiece tubes and a photo tube. There are eye relief adjustment and diopter adjustment, as well as coaxial coarse and fine focusing knobs. As accessories, which are available on request, you have a big choice: Wide field eyepieces (WF10x, WF16x), planachromatic DIN objectives (10x, 25x, 40x), planachromatic DIN phase contrast objectives with annular diaphragm (10x, 25x, 40x), condenser (working distance 30 mm; with phase contrast), condenser (working distance 70 mm), different filters (blue, green, ground glass) and specimen holders for rectangular or round culture utensils. FEATURESType: Inverted microscopeView: TrinocularApplication range: Biology, Research, Laboratory, Medical science, Education, Teaching, Veterinary medicine, Agriculture, Limnology, In vitro fertilisationIllumination: Halogen Level: Intermediate, ExpertWarranty: 2 years1.25 Abbe-Condenser with Iris diaphragm and filter holderIncl. adjustable mechanical stage Integr. dimmerAdjustable eye reliefDiopter adjustment  SCOPE OF DELIVERYMicroscope4 DIN PL-L plan-achromatic objectives: 10x, 10x PHP, 25x, 40x2x WF10x eyepieces 1.25 Abbe-Condenser with Iris diaphragm and filter holderdust coversField diaphragmpower cable

The BRESSER Science ETD-301 is a stereo incident light and transmitted light microscope with high-quality optics.It is suitable for use in medicine, agriculture, forestry, forensics, scientific research institutes and schools as well as for the assembly and inspection of small components in precision mechanics and electronics.The particularly wide base with object table enables the viewing of larger objects. The maximum object height is approx. 85 mm. The large working distance of 100 mm allows working with tools, e.g. for dissecting, measuring or testing.The instrument has an LED incident light and a transmitted light illumination, which can be used individually or combined and each can be infinitely adjusted. The incident light angle can be adjusted in a particularly user-friendly way. With interchangeable wide-field eyepieces (WF10x) and a 9x stereo zoom lens (0.7x-6.3x), a continuous magnification range from 7x to 63x is realised.The coarse and fine focusing allows precise focusing, especially at high magnifications and in photography.The interpupillary distance and dioptric compensation are individually adjustable. The trinocular microscope head can be rotated 360° and has two 45° inclined eyepiece tubes.The trinocular tube can carry an SLR/system camera (APS-C or DX format) or a c-mount camera (sensor size up to 1") using an optional adapter. By means of a switch, the beam path of one eyepiece is deflected towards the camera. This provides 50% more light than a microscope with a permanent beam splitter.To connect an SLR or system camera, the adapter with item no. 5942100 and a camera-specific T2 ring are required.A c-mount camera is connected with the optional adapter item no. 5942101. FEATURESWF 10x eyepieces with 22 mm field of view (referring to a 1x objective)Large, continuous 9x zoom (7x - 63x magnification)With optional adapter suitable for SLR/system cameras and c-mount camerasTripod with coarse and fine focusSCOPE OF DELIVERYMicroscope zoom headLED microscope standWF 10x eyepieces with 22mm field of view (2 pieces)Translucent plastic object plateAC adapter (12V 3A)dust cover

In the microscope's basis, there are a transmitted light halogen illuminator (20 W) as well as the power supply and the continuous adjustable dimmers for reflected light and transmitted light. The trinocular head attachment works with both illumination modes. It also allows photography and binocular visual observation. The inclination of the eyepiece tubes is 30°. With the polarization head attachment, the instrument is suitable for the internal structure of materials and for condition monitoring of different mechanical apparatus in college and factory. The reflected light halogen illumination (20W), which goes through the objective onto the object, can be modified for special purposes with a colour filter wheel and the polarizer/analyzer combination. The Science ADL 601P is an instrument with an excellent value for money. It has also the other features, which are typical for high-quality microscopes: fourfold objective nosepiece, lengthwise and cross moveable stage, coaxial focusing knobs (concerning fine drive: 200 µm / full turn), adjustment of eye relief, diopter adjustment and the phototube. Optional available, general accessories are the wide field eyepieces (WF10x, WF16x), the dividing eyepiece (WF10x), different planachromatic DIN objectives (e.g. 4x, 5x, 10x, 20x, 40x retractable, 60x retractable, 100x-oil retractable), the Abbe condenser (numerical aperture 1,25; with iris diaphragm and auxiliary lens), dark field condensers (dry and oil), immersion oil and phase contrast set.  Features • Type: Biological microscope • View: Binocular • Application range: Biology, Gemology, Mineralogy, Botany • Illumination: Halogen • Level: Intermediate, Expert • Warranty: 2 years • 1.25 Abbe-condenser with iris diaphragm and filter holder • Incl. adjustable mechanical stage • Integr. dimmer • Adjustable eye relief • Diopter adjustment Specifications • Comfortable binocular view, 30° inclined • Transmitted 6V/20W, adjustable • Magnifications: 40x-600x • Eyepieces: 2x WF10x • Eyepiece diameter: 23.2 mm • Objectives: PL-5x, PLL-10x, PLL-40x, PLL-60x • Power supply: 220/240V Included Accessories • 4 DIN-objectives • 2x 10x eyepieces • 1.25 Abbe-condenser with iris diaphragm and filter holder • Polariser-/Analyser-Attachment • Additional Halogen-Incident-Illumination for Polarisation

The NIB 630 is the flagship of the NIB600 series of inverted microscopes. With such an inverted design, the device enables the microscopy of plankton, microalgae and cell cultures. Cell cultures can be examined directly in the culture vessel without taking samples. For particularly easy sample handling, it is equipped with a tiltable lighting unit. This means that even tall vessels can be placed comfortably without bumping against the lighting unit. The microscope head is equipped with a height-adjustable ergo viewing head. This allows users of different heights to adjust the microscope to a comfortable and ergonomic viewing height with a single hand movement. This special microscope is used in water management offices, research institutes and universities, in human and veterinary medicine, agriculture, marine biology, limnology, aquaculture and many more. The integrated display informs you at any time about the selected magnification and the status of the illumination as well as the ECO mode. The brightness can be programmed for each objective so that there is no need to readjust when changing magnification and the user is not blinded. OBJECTIVE The NEXCOPE NIB630 microscope is equipped with a quintuple nosepiece. A 4x planachromatic objective and one each of 10x, 20x and 40x planachromatic phase contrast objectives are included. The condenser has a numerical aperture of 0.3 and an extra long working distance. The objectives are calculated for a soil thickness of 1.2 mm. Please use appropriate culture vessels. The universal specimen holder is suitable for standard slides. EYEPIECES The eyepieces have a field of view of 22 mm. This gives you a very large field of view. The high eye point makes them very comfortable even for spectacle wearers. A rubber edge protects against scratches on contact. Dioptric compensation from -5 to +5 can be individually adjusted for each eyepiece. The interpupillary distance can be adjusted between 48 mm and 75 mm. The binocular can be tilted up and down to adjust the viewing height. ILLUMINATION The Koehler illumination provides the best possible light guidance of the microscopy light. This avoids stray light and only illuminates the just visible area in the specimen. This protects sensitive living specimens from excessive light irradiation. The powerful 3W LED can be adjusted in brightness and ensures optimal illumination. The brightness can be adjusted individually for each objective. If an objective is changed, the NEXCOPE NIB630 automatically adjusts the previously set brightness. The display shows the currently selected lens and the current brightness. The tiltable lighting unit makes it easier to work with taller sample vessels. The adjustable condenser with extra-long working distance enables quick readiness for use. MECHANICS In addition to coarse focusing, fine focusing helps to bring the specimen into focus very precisely. A full turn of the fine focusing knob moves the stage up or down by 0.2 mm. On the right side, the fine focus can be adjusted with a finger. The friction of the coarse focusing can also be varied. The fine focusing knobs are held magnetically and can be mounted on the left or right. The XY stage offers the possibility of inserting various holders. This allows slides or even petri dishes to be inserted. CAMERA CONNECTION The NEXCOPE NIB630 is specially designed for use with C-mount cameras. The camera connection is located on the side and has a switch between visual observation and camera (100/0 or 0/100). You can choose from two different adapters, depending on the sensor size: 0.5x C-mount adapter 1x C-mount adapter (already included in the scope of delivery) ACCESSORIES (optional) Hoffman Modulation Contrast Relief 3D contrast Terasaki holder, Petri dish holder 54 mm and 90 mm Camera adapter for C-mount 0.5x FEATURES Professional inverted transmitted light microscope Type of objectives: infinity plan achromatic (60 mm adjustment length, M25) Precise mechanics Very bright illumination SCOPE OF DELIVERY Inverted transmitted light microscope 4x objectives, of which 10x, 20x and 40x as phase contrast objectives Filter slider for phase contrast Universal sample holder Centering telescope for phase contrast

The BRESSER DST-0745 is a special microscope that is operated with a c-mount camera (camera not included). This allows direct viewing on a screen. Due to the vertically installed optics, there is no shifting of the image when focusing. This is especially useful for "focus stacking" shots. The zoom is continuously adjustable from 0.7x - 4.5x. A coarse and fine focus adjustment facilitates focusing, especially at high magnifications. The convenient and user-friendly operation makes the digital microscope particularly suitable for daily use in the workshop. Measurements, quality control of surfaces or inspection of components and raw materials are easy with the workshop microscope. Insects, plants and rocks are also impressively displayed. The DST-0745 workshop microscope is not suitable for visual observation. It can only be used in combination with a MikroCam c-mount microscope camera. It is designed for camera sensors of about 1/2". Smaller sensors can be used without problems. With larger sensors there is vignetting, which becomes somewhat less at higher magnifications. Due to the two flexible incident light lamps, the light can be optimally positioned. The transmitted light illumination helps when observing transparent objects. The brightness of both illuminators can be adjusted in five steps. The magnification of a USB camera differs from the magnification of the lens. It depends, among other things, on the sensor size and the display on a monitor. It can be compared to macro lenses with macro factor 0.7:1 up to 4.5:1. Compatible MikroCam cameras: 5914131 MikroCam SP 1.3 MP 5914320 MikroCam SP 3.1 MP 5914520 MikroCam SP 5.0 MP 5914004 MicroCamII 5914020 MicroCamII 5914310 MicroCamII 5914912 MicroCamII 5914180 MikroCam PRO HDMI 5914190 MikroCam PRO HDMI 5MP 5914195 MikroCam Pro HDMI Autofocus FEATURES Designed for C-mount microscope cameras Up to 1/2" sea sensor size Continuous zoom (0.7x - 4.5x) Two flexible incident light LED lamps LED transmitted light illumination Adjustable brightness SCOPE OF DELIVERY Zoom lens head 0.7x - 4.5x Stand with incident and transmitted light illumination Object plate glass (one side frosted) Object plate plastic (one side white, one side black) Power supply unit, operating instructions, dust cover

The BRESSER MikroCam SP microscope cameras help to make photos and videos with a microscope very easy.The modern CMOS sensors  give brilliant colors with very low noise and is the perfect choice for any application where true natural colors are important. The included imaging software has multiple adjustments for the capture of still images and videos. The integrated measuring* routine allows for a measurement in the camera live image. The software can be operated in the following languages: German, English, French, Polish, Russian, Turkish, Chinese. The camera housing includes the c-mount adapter thread. For use with 23,2mm adaptations, we recommend the optional, variable 0,5x reducer (item no. 5914005). For special applications the camera can also be mounted using the 1/4” camera tripod thread. FEATURES2048 x 1536 Pixel Sensor 5,28 mm x 3,84 mm (1/2.8'') Pixel: 2,5 x 2,5 µmHigh quality metal housingNumerous software functions, e.g. measurement, focus-stacking (combines several images for more depth of focus), mosaic (for larger image fields)Image and video capture, incl. time lapse functionGood compatibility with different microscopes SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYCamera head USB 2.0 cable (approx. 1.8 m)Adapters for 23.2 mm, 30 mm and 30.5 mm eyepiece holdersCapture and image processing software