BRESSER SG-800D Photo/Video Halogen Set 2
Currently not available
Product number:
F002058
EAN:
4007922037806
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER SG-800D Photo/Video Halogen Set 2"
The BRESSER SG-800D photo / video halogen set has a strong lamp holder made of metal and a plug-in halogen lamp up to a maximum of 800W. This lamp is often used in video recording, but is also very well suited for product photography.
At the front is a multifunctional 4 flap set, which allows the light to be controlled and bundled as required. With the sharp button on the back of the housing, the beam angle of the lamp can be set narrower or wider by bringing the lamp lower or higher into the housing.
The handbox has a dimmer and an on / off switch. The lamp can be infinitely dimmed so that you can optimally adjust the light for making recordings. With this complete set you can immediately get to work and it is very handy to transport.
Characteristics:
Scope of delivery:
At the front is a multifunctional 4 flap set, which allows the light to be controlled and bundled as required. With the sharp button on the back of the housing, the beam angle of the lamp can be set narrower or wider by bringing the lamp lower or higher into the housing.
The handbox has a dimmer and an on / off switch. The lamp can be infinitely dimmed so that you can optimally adjust the light for making recordings. With this complete set you can immediately get to work and it is very handy to transport.
Characteristics:
- Dimmable
- Compact
- Color temperature: 3200K
- Incl. 4 Shielding flaps
- Easy handling
- Plug-in lamp, easy to replace
- Strong U-shaped bracket with lamp support connection
- Body suitable for long-term use
Scope of delivery:
- 2 x Studio lamp houlder SG-800D up to 800W
- 2 x Lamp stand D-49 (260 CM)
- 2 x 4 shielding flaps
- 2 x stand bracket
- 2 x bulb 220v-800w
- 2 x 2.5m power cord with on / off switch and dimmer
| Batteries included: | No |
|---|---|
| Flash counter: | No |
| Flash lamp: | No |
| Illuminant: | Halogen |
| LED modelling lamp: | No |
| Lamp included: | No |
| Metal reflector: | No |
| Overheat protection: | No |
| Photo cell: | No |
| Protection cap: | No |
| Synchro flash cord included: | No |
| Tilt head with tripod connection: | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Risk of overheating! Ensure adequate air circulation.
- Avoid moisture! Do not use the device in damp or wet environments.
- Risk of burns! Lamps can become hot – allow them to cool fully before replacing.
- Electrical safety! Use only the recommended power source and regularly check cables for damage.
- Stable positioning required! Ensure tripods are securely set up to prevent tipping over.
- Fire hazard! Keep flammable materials away from lighting.
- Eye protection! Do not look directly into the lamp to avoid eye damage.
- Switch off before cleaning! Turn off the device and let it cool before cleaning with a dry cloth.
- Store dust-free! Keep in a dry and clean place.
- Follow intended use! Use the device only for its designated purpose and according to the instructions.
- Ensure child safety! Keep out of reach of children to prevent fire or impact hazards.
- Risk of pinching! Be cautious with moving parts such as adjustable tripods and clamps.
- Safe transport! Pack the product carefully to minimise damage during transit.
- Prevent heat damage! Extreme heat or cold can shorten the lifespan of the lamp.
