BRESSER SH-86WA LED Bi-Color Soft-Light Panel Light
- 86 W surface light with 430 LEDs (0.2 W each)
- Illuminance at 1 metre: 955 lux / CRI: 95%
- Gradually adjustable colour temperature from 3200 to 5600 K
- Power supply: Mains cable (included), rechargeable battery (optional)
- Dimensions: 855 x 220 x 19 mm
Currently not available
Product number:
F004086
EAN:
4007922056791
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER SH-86WA LED Bi-Color Soft-Light Panel Light"
The BRESSER SH-86WA LED bi-colour soft light emits a soft, pleasant light. The colour temperature is adjustable from 3200K to 5600K, making the lamp suitable for a wide range of scenarios.
The LED soft-light surface lamp is dimmable, allowing you to adjust the brightness between 10-100%. The light panel is ideal for use in studio and on-the-go. The continuous light is equipped with 430 LEDs and a passive cooling system, which ensures that you are not disturbed by the sound of a fan.
The beam angle of 120 degrees ensures a wide and uniform distribution of light. This allows you to project bright, soft light where it is needed, resulting in clear shadows, no uneven colours and a pure, white light. A feature-packed LED light with soft light for photography and video shooting.
FEATURES
DELIVERY CONTENT
The LED soft-light surface lamp is dimmable, allowing you to adjust the brightness between 10-100%. The light panel is ideal for use in studio and on-the-go. The continuous light is equipped with 430 LEDs and a passive cooling system, which ensures that you are not disturbed by the sound of a fan.
The beam angle of 120 degrees ensures a wide and uniform distribution of light. This allows you to project bright, soft light where it is needed, resulting in clear shadows, no uneven colours and a pure, white light. A feature-packed LED light with soft light for photography and video shooting.
FEATURES
- Adjustable colour temperature from 3200 K to 5600 K
- Colour rendering index >95%
- Dual power supply
- Full aluminium housing
- Passive cooling
- Slimline version
- Robust ball head connection
- Flexible design
- Ultra-soft light with a beam angle of 120 degrees
DELIVERY CONTENT
- LED light
- Power cable with coaxial connection
| Batteries included: | No |
|---|---|
| Beam angle (°): | 120 |
| Color temperature (Kelvin) from: | 3200 |
| Color temperature (Kelvin) to: | 5600 |
| Colour Rendering Index %: | 95 |
| Flash counter: | No |
| Flash lamp: | No |
| Illuminance (Lux): | 955 |
| Illuminant: | LED |
| LED modelling lamp: | No |
| Lamp included: | No |
| Metal reflector: | No |
| Overheat protection: | No |
| Photo cell: | No |
| Power Illuminants (Watt): | 0.2 |
| Protection cap: | No |
| Synchro flash cord included: | No |
| Tilt head with tripod connection: | No |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Risk of overheating! Ensure adequate air circulation.
- Avoid moisture! Do not use the device in damp or wet environments.
- Risk of burns! Lamps can become hot – allow them to cool fully before replacing.
- Electrical safety! Use only the recommended power source and regularly check cables for damage.
- Stable positioning required! Ensure tripods are securely set up to prevent tipping over.
- Fire hazard! Keep flammable materials away from lighting.
- Eye protection! Do not look directly into the lamp to avoid eye damage.
- Switch off before cleaning! Turn off the device and let it cool before cleaning with a dry cloth.
- Store dust-free! Keep in a dry and clean place.
- Follow intended use! Use the device only for its designated purpose and according to the instructions.
- Ensure child safety! Keep out of reach of children to prevent fire or impact hazards.
- Risk of pinching! Be cautious with moving parts such as adjustable tripods and clamps.
- Safe transport! Pack the product carefully to minimise damage during transit.
- Prevent heat damage! Extreme heat or cold can shorten the lifespan of the lamp.
