BRESSER Slave Studio Flash 45W/E27

The flash lamp can be used with any lamp holder with an E27 socket

  • Flash lamp for use with lamp holder with E27 fitting
  • 45 Watt light bulb
  • Built-in photocell enables unleashed flash
  • With removable diffuse cover
  • Scope of Delivery: 1x flash bulb

€33.00*

Available, delivery time: 1-3 days

Product number: F001892
EAN: 4007922031606
WEEE-Reg.-Nr.: DE 34323861

Bresser Photo Studio Equipment

With Bresser's photo studio equipment, you can create your own studio and bring your creative ideas to life. The range offers everything you need for a professional studio setup: a selection of backgrounds for various uses, studio flashes and continuous lights for optimal lighting, as well as tripods and versatile camera accessories. Whether you're planning product photos, portraits, or artistic shots, the combination of well-thought-out accessories and light control gives you flexibility and control over your image composition – ideal for both beginners and professionals alike.

Product information "BRESSER Slave Studio Flash 45W/E27"
The BRESSER slave flash bulb is an economic solution for beginners. The flash bulb can be used with every lamp holder with a E27 fitting. The 45 Watt flash has a built-in photo cell, which enables off-camera flashing. The diffuse cover can be screwed off if necessary.

FEATURES
  • 45 W flash bulb
  • for use with lamp holder with a E27 fitting
  • slave function enables unleashed flash
  • removable diffuse cover
SCOPE OF DELIVERY
  • 1x Slave Flash Bulb
Material: Plastic
Warning Note 1: Risk of overheating! Ensure adequate air circulation.
Warning Note 2: Avoid moisture! Do not use the device in damp or wet environments.
Warning Note 3: Risk of burns! Lamps can become hot – allow them to cool fully before replacing.
Warning Note 4: Electrical safety! Use only the recommended power source and regularly check cables for damage.
Warning Note 5: Stable positioning required! Ensure tripods are securely set up to prevent tipping over.
Warning Note 6: Fire hazard! Keep flammable materials away from lighting.
Warning Note 7: Eye protection! Do not look directly into the lamp to avoid eye damage.
Warning Note 8: Switch off before cleaning! Turn off the device and let it cool before cleaning with a dry cloth.
Warning Note 9: Store dust-free! Keep in a dry and clean place.
Warning Note 10: Follow intended use! Use the device only for its designated purpose and according to the instructions.
Warning Note 11: Ensure child safety! Keep out of reach of children to prevent fire or impact hazards.
Warning Note 12: Risk of pinching! Be cautious with moving parts such as adjustable tripods and clamps.
Warning Note 13: Safe transport! Pack the product carefully to minimise damage during transit.
Warning Note 14: Prevent heat damage! Extreme heat or cold can shorten the lifespan of the lamp.

Produkt- und Sicherheitshinweise


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Customers also viewed

BRESSER BRT-200 Studio Flash Set 200 W
The BRESSER BRT-200 is the ideal starter package for your own photo studio. The two studio flashes of the BRT-200 series with the corresponding softboxes in the size 50 x 70 cm offer a wide range of applications in product and portrait photography. The power can be variably adjusted from 1/16 to full power and convinces with a charging time of 0,5 to 1,8 seconds. Various light shapers such as octaboxes or spots can be connected to the S-bayonet connection.A 75 W halogen lamp facilitates the correct adjustment of the light. All settings can be made via the simple control panel.With the optional BRESSER T-12 radio trigger set F001145, the studio flashes can be controlled remotely at a distance of up to 30 m.FEATURESClear, manual control panelContinously adjustable flash output (1/16 to 1/1)Flash resolution options: sync cord, photocell, test button, remote controlEasily replaceable flash tube and modelling lampOverheating protection Robust ABS housingIntegrated slaveS-Bayonet accessory connectorSCOPE OF DELIVERY2x BRT-200 studio flas2x Protective cap (for transport)2x Synchro flash cable2x Modelling lamp2x Flash tube2x Mains cable2x Tripod 200 cm2x Softbox 50 x 70 cm ( with diffuser and inner diffuser)

€239.00*
BRESSER FN-600 Studio Flash with TTL Function for Nikon + Accumulator
The BRESSER FN-600 studio flash with TTL function for Nikon cameras is the ultimate and powerful flash when it comes to portable lighting. The TTL version allows you to use the TTL function (Nikon). This increases the user-friendliness and application possibilities of the FN series enormously. With the built-in lithium-ion battery you need no more compromises. No heavy battery packs are needed, so you can easily use the studios at any location. The battery is also detachable. A mains power adapter is available as an option so that the FN-600 can be connected to the power supply. The clear LCD display makes settings very user-friendly. The studio flash can quickly be adjusted to a power of 1/128 to 1/1. The high-speed synchronization function allows the multifunctional use of the FN TTL series. Like many other studio-flashs from our range, the flash units of the FN TTL series are equipped with a Bowens bayonet connector. This can be used by a variety of accessories such as softboxes, barndoors, snoots and others. Via the USB interface the FN-600 TTL can be reliably remotely controlled and adjusted in combination with the supplied WT-4i remote release system. The studio flash is already equipped with an internal wireless receiver. This device is the ultimate flash when it comes to creative freedom, mobility and versatility.The USB interface on the studio flash is only suitable for BRESSER WT-triggers and receivers. Please do not charge or connect any other technical devices to the studio flash! The included trigger is compatible with the following Nikon cameras: D800, D700,D7x00, D300s, D300, D90 and D80. Other models are not compatible. FEATURES TTL Nikon function WT-4i TTL Nikon Trigger Set integrated, wireless receiver for the WT-4i TTL transmitter High speed synchronization up to 1/8000 Guide number: GN81 Maximum flash duration 1/10000 (T01, low power) integrated, removable lithium-ion battery 12500-20000 mAh fast charging timefrom 0.01 to 3.5 seconds Multiple flashes: 5x, 10x or 15x per second 10W Power LED Setting Lamp practical handle with tripod connection thread Battery can also be charged via car charger SCOPE OF DELIVERY studio flash WT-4i Nikon TTL transmitter protective cap Standard metal reflector flash tube LED adjustment lamp 10W sync cord integrated, detachable battery Handle with tripod connector charger

€599.00*
BRESSER Photo mount with field tripod and wedge
Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER photo mount is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain punctiform even with long exposures. Which cameras are basically suitable for use with the BRESSER photo mount ? All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable. The BRESSER photo mount is designed for a camera with lens of max. 2.5 kg total weight to carry and track. Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the optical pole finder, this is done quickly.  After setting up the light and compact photo mount, simply set the approximate latitude (pole height) to the scale and aim Polaris through the illuminated pole finder scope. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ...  The tracking is carried out by a precise stepper motor, which can also be moved via the hand box with 2- or 32-fold speed in forward and reverse. Thus, the sky section can be adjusted even more precisely. Low power consumption allows up to 50 hours of operation with just one battery charge.  The height-adjustable stainless steel tripod with polar wedge is an extremely stable base for the BRESSER photo mount. Thanks to the integrated circular level in the tripod head even the leveling of the photo mount is child's play. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount and the tripod with polar wedge are also available separately - Product No.: 4964111 and 4964112   FEATURESEquatorial Photo-MountAdjustable stainless steel field tripod with polar wedge and bubble levelAutomatic siderial tracking against the Earth rotation Handbox to control the tracking motors (2x/32x)Suitable for northern and southern henisphereOptical pole finder scope with illumination unit includedBallhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 3/8" threaded bolt for ballhead mountingPhoto-Mount with 1/4" und 3/8" inner threads for tripod mountingHigh precision stepper motor with helical gear for accurate tracking Large screws and handles for easy usage at night  Battery operation or stabilized power adapter (optional acc.) Battery life: up to 50 hoursPower connector at handbox: 6 volts DC jack 5.5/2.5mm (positive pole at center pin)Weight Photo-Mont with ballhead: 1.4 kg Weight tripod with polar wedge: 3.5 kgLoad capacity of Photo-Mount: up to 2.5 kg Height of camera sattle plate max. 140 cmSCOPE OF DELIVERYFoto-Mount headTracking motor with HandboxUltra-stable stainless steel field tripod with bubble levelBallhead with quick release saddle plate Pole finder scope with illumination unitBattery compartment 6 volts with case (no D-batteries included)Manual   

€409.00*
BRESSER BRM-300AM studio flash set 3x 300W
The BRESSER-BRM-300AM is a very compact and powerful studio flash with a variably adjustable lightning power of 1/32 up to a full power of 300 watts per second. This flash has a Bowens-S bayonet connector, so you can use a lot of standard accessories from BRESSER with the BRM-300AM. Thanks to the fast recharge time of 0.5 to 1.0 seconds, the flash is ready for use immediately. The housing is very robust and the 150W halogen lamp can be switched on and off.The rear of the BRM-300AM is equipped with a clear user interface and a special protection ensures that the flash does not overheat even in long-term use. The settings can be easily and quickly adjusted using the control buttons. The BRESSER-BRM-300AM studio flash is suitable for product and portrait photography. FEATURES Flash output of 300 watts per second Adjustable from 1/32 to full power Charging time from 0.5 to 1.0 second 150W halogen setting lamp - fully on or off Color temperature: 5300-5600K Bowens-S bayonet connection Comprehensive user interface overheating protection SCOPE OF DELIVERY 3x studio flash BRESSER BRM-300AM 3x tripod 200cm 3x Softbox 60x90cm 1x flash sync cable 3x adjustment lamp 150W 3x flash tube 300W 3x power cable 3x replacement fuse SPECIFICATIONS Model: BRM-300AM Power: 300WS Guide number: GN56 Charging time: 0.5 - 1.0 seconds Power range: 6 steps (1/32 - 1/1) Setting lamp: halogen, 150W Flash tube: JDD-7 300WS Color temperature: 5600K Range Photo Cell: about 10 meters Flash duration: 1/1000 - 1/2000 second Overheating protection: Yes Cooling: Yes Operating voltage: AC 220V - 240V @ 50Hz Fuse: T8 / 250V microfuse (5x20mm), 6.3A Warranty: 2 years

€475.00*
BRESSER BR-60S COB LED Daylight-Set 60W
Are you looking for an enery-saving, low-noise and easy-to-use solution for your photos and videos? Then with the expandable BRESSER BR-60S COB LED starter set, you have everything you need to get started straight away.The BRESSER BR-60S COB LED daylight set with a power of 60W conisting of two BR-60S COB LED studio lamps, 2 Bresser softboxes 60x90 cm, 2 tripods with 1/4" spigot adapter and remote control is an high-quality complete set with which you can immediatley start with your work in the video or photo studio.The robust BRESSER BR-60S COB LED lamps have a power of 60W and are perfectly suitable with a colour temperature of 5600K and a CRI of 95, for a true-colour reproduction of the shots in the photo and video area.The brightness of the BRESSER BR-60S COB LED with 5400 lux within one metre of the object is ideally suited to create a daylight atmosphere and can be continuosly adjusted by a dimmer from 10% to full power. With the included remote control with a range of up to 30m, you can not only operate the BRESSER BR-60S manually, but also control several lamps at the same time through the 99 channels and save different settings for each lamp. The LCD display of the robust BRESSER BR-60S LED, which i smade of an full aluminium housing, makes every setting easy to read.The highlight of the BRESSER BR-60S LED ist that it has an S-bayonet Bowens connection and thus enables versatile lightning design using a wide range of additionally available light shapers with an S-bayonet connection.The two included BRESSER softboxes 60 x 90 cm are suitable for various types of shooting and create controlled light on the subject, or with the help of the included front diffuser a perfect, soft and even illumination.The BRESSER BR-60S LED set is perfectly suitable for video production due to the low-noise but nevertheless powerful LED´s, as no loud fan is disturbing due to the low heat development.Also included are two high-quality aluminium tripods with a height of 83 to 180 cm.PROPERTIESPowerful 60W COB LED with S-bayonet connection5600 K/ 5400 lumen at 1mAluminium housing with LED displayDimmable from 10%-100%Low noiseRemote controlSpace-savingSCOPE OF DELIVERY2x Bresser BR-60S COB LED studio lamp 60W2x Bressser protective cap for BR-60S2x Bresser Softbox 60 x 90 cm2x Bresser tripod with spigot connection up to 180 cm1x Remote control ) 2x AAA batteroes, not included)2x Mains connection

€339.00*
Bresser Quick Parabolic Deep Octa 70cm
The BRESSER Super Quick Parabolic Softbox 70 cm not only impresses with its quick set-up, but also with its durable and high-quality design with stable ribs.A softbox should not be missing in professional photo studio equipment, but often the set-up is tedious and time-consuming. The Super quick function of the BRESSER Parabolic Softbox simplifies handling and makes it the perfect companion on location as well. With a diameter of 70 cm and a depth of 50 cm, the softbox, equipped with a Bowens mount, can be connected to various photo studio lights and also photo studio flashes.With its highly reflective coating, the BRESSER Super Quick Parabolic Softbox ensures a natural colour temperature and thus an even and diffused light and is ideal for portrait and beauty photography.An additional internal and an external diffuser ensure softer illumination and minimal cast shadows. The parabolic shape of the Super Quick Softbox gives you targeted and better control over the photo studio light.Tip for setting up the BRESSER Super Quick Parabolic Softbox: Make sure that the Velcro fasteners (Velcro) of the fabric are fully open. This makes it easier to set up and prevents excessive tension on the fabric during set-up. After fitting, close the Velcro fasteners completely.Note: To unfold the softbox, lift the struts slightly and then press the lever.FEATURESCompact and lightweight softboxQuick-fit function to quickly fold and unfold the softboxCompatible with Bowens connector LED lightsCompatible with Bowens connector flashesEasy assembly / DisassemblyWith diffuser for soft lightPerfect for beauty and portrait photographyUniform illuminationOuter diameter: 70 cmDepth: 50 cmSCOPE OF DELIVERYBRESSER Super Quick Parabolic Softbox 70 cmOuter diffuserInner diffuserRubber protection ring Bowens-MountRubber protection Quick Clip SystemCarrying bag

€79.00*