BRESSER Speedring Adapter Elinchrom, diameter 14.5cm
Softbox adapterring for Elinchrom studio flashes
- Sturdy metal speedring for studio flashes of the brand Elinchrom
- For compatibility with softboxes please check their connection diameter
- outer diameter: 14.5 cm / inner diameter: 8 cm / weight: 160 g
- For softboxes with smaller cannection diameter, see art. no. F000377
Currently not available
Product number:
F000229
EAN:
4007922017129
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER Speedring Adapter Elinchrom, diameter 14.5cm"
With this adapter ring you are able to connect softboxes from BRESSER to Elinchrom studio flashes.
ATTENTION
The Speedring Adapter Elinchrom is available in two different sizes. Please check the diameter required for your softbox before deciding on a model.
FEATURES
ATTENTION
The Speedring Adapter Elinchrom is available in two different sizes. Please check the diameter required for your softbox before deciding on a model.
FEATURES
- sturdy metal adapter ring
- connection of BRESSER softboxes to Elinchrom studio flashes
- for the compatibility of the softboxes, please check their connection diameter
- outer diameter 14.5 cm (for the model with 13.5 cm see item number F000377)
- 1x speedring softbox adapter
| Batteries required: | No |
|---|---|
| Colour: | black |
| Compatible Brand: | Elinchrom |
| Diameter (mm): | 144 |
| Material: | Metal |
| Net weight (without access.) (g): | 160 |
| Total height (mm): | 30 |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Use compatible light sources! Ensure the light shaper matches the lamp or flash unit being used.
- Avoid overheating! Do not leave the light source switched on longer than necessary to prevent heat build-up and material damage.
- Maintain a safe distance! Do not place light shapers near curtains, paper, or other flammable objects.
- Stable mounting required! Firmly attach the light shaper to prevent tilting or falls.
- Protect from moisture! Avoid rain and wet environments to prevent damage.
- Risk of cuts! Some metal light shapers have sharp edges. Wear gloves to avoid injury.
- Fold and store carefully! Gently fold or store the light shaper to prevent tears or damage.
- Dust-free cleaning! Use a soft, dry cloth to remove dust and dirt without damaging the material.
