BRESSER Spot Halogen GU10+C 220V/50W
- Halogen Spot Replacement Lamp
- GU10+C Bayonet socket
- 220 - 240 V / 50 W
€3.95*
Currently not available
Product number:
F000682
EAN:
4007922020839
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER Spot Halogen GU10+C 220V/50W"
The GU10-Halogen Lamp has a bayonet socket for easy installation
Scope of delievery:
Scope of delievery:
- 1x Spot Halogen GU10+C 220V/50W
| Batteries included: | No |
|---|---|
| Colour: | silver |
| Flash counter: | No |
| Flash lamp: | No |
| LED modelling lamp: | No |
| Lamp included: | No |
| Light source replaceable: | No |
| Material: | Glass |
| Metal reflector: | No |
| Net weight heaviest part (kg): | 0.04 |
| Overheat protection: | No |
| Photo cell: | No |
| Power Illuminants (Watt): | 50 |
| Protection cap: | No |
| Synchro flash cord included: | No |
| Total height (mm): | 55 |
| Total length (mm): | 50 |
| Total width (mm): | 50 |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Safe workspace! Maintain order and avoid tripping hazards.
- Risk of electric shock! Completely switch off and disconnect the studio flash or lamp from the power supply before maintenance.
- Risk of burns! Allow the lamp or flash tube to cool completely before replacing it.
- Risk of breakage! Flash tubes and lamps are fragile handle with care and avoid hard impacts.
- Explosion hazard! Use only original or approved replacement lamps and flash tubes to minimise risks.
- Correct installation! Insert the new lamp or flash tube into the socket according to the instructions.
- Keep dry! Do not use the device in humid environments and store spare flash tubes and lamps in a dry place.
- Risk of fatal electric shock! Never open a studio flash or lamp to replace or repair internal components.
- Proper disposal required! Dispose of damaged or broken flash tubes and lamps according to local regulations.
- Check correct voltage! Always ensure that the replacement lamp has the correct voltage and specifications for the flash head.
