BRESSER SS-10 Speedring Adapter Elinchrom, diameter 13.5cm
Softbox adapterring for Elinchrom studio flashes
- sturdy metal speedring
- replaces the adapter ring included with the softboxes of the SS-10 series
- allows to use the SS-10 softboxes with Elinchrom studio flashes
- outer diameter: 13.5 cm / weight: 40 g
- scope of delivery: 1x speedring softbox adapter
Currently not available
Product number:
F000377
EAN:
4007922018607
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER SS-10 Speedring Adapter Elinchrom, diameter 13.5cm"
With this adapter ring you are able to connect SS-10 softboxes from BRESSER to Elinchrom studio flashes.
ATTENTION
The Speedring Adapter Elinchrom is available in two different sizes. Please check the diameter required for your softbox before deciding on a model.
FEATURES
ATTENTION
The Speedring Adapter Elinchrom is available in two different sizes. Please check the diameter required for your softbox before deciding on a model.
FEATURES
- sturdy metal adapter ring
- connection of BRESSER SS-10 and SS-35 softboxes to Elinchrom studio flashes
- outer diameter 13.5 cm
- 1x speedring softbox adapter
| Batteries required: | No |
|---|---|
| Colour: | silver |
| Material: | Aluminium |
| Net weight (without access.) (g): | 40 |
| Total height (mm): | 28 |
| Total length (mm): | 150 |
| Total width (mm): | 150 |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Use compatible light sources! Ensure the light shaper matches the lamp or flash unit being used.
- Avoid overheating! Do not leave the light source switched on longer than necessary to prevent heat build-up and material damage.
- Maintain a safe distance! Do not place light shapers near curtains, paper, or other flammable objects.
- Stable mounting required! Firmly attach the light shaper to prevent tilting or falls.
- Protect from moisture! Avoid rain and wet environments to prevent damage.
- Risk of cuts! Some metal light shapers have sharp edges. Wear gloves to avoid injury.
- Fold and store carefully! Gently fold or store the light shaper to prevent tears or damage.
- Dust-free cleaning! Use a soft, dry cloth to remove dust and dirt without damaging the material.
