rectangular umbrella softbox with 125W fluorescent lamp
- softbox for soft and even illumination of your scene
- umbrella construction for fast and easy setup
- 125W fluorescent lamp ≙ 625W light bulb
- softbox dimensions: 70 x 100 cm
- scope of delivery: softbox, fluorescent lamp, diffuser, protective cover
Currently not available
The softbox has an E27 lamp fitting, but with the optional JDD-8 Lampholder/Adapter you can screw in a maximum of 4 fluorescent lamps, which are available in different wattages: 26W up to 125W.
The colour temperature of these lamps is 5300K/5500K.
Because of the umbrella construction, the softbox can be folded and set up fast. The metal rods attach to the holder and to the double-reinforced corners and provide the softbox with a taut form.
The softboxes of BRESSER are of very good quality. The softbox has a through and through black encasement with a diffuse white cloth at the front. You receive a beautiful, uniform and smooth illumination.
FEATURES
- rectangular softbox
- tripod connection with tilt head
- foldable and easy to set up
- E27 lamp fitting
- power cable with switch
- softbox
- diffuser cloth
- fluorescent lamp
- protective cover
Batteries included: | 0 |
---|---|
Flash counter: | 0 |
Flash lamp: | 0 |
Illuminant: | Fluorescent lamp |
LED modelling lamp: | 0 |
Lamp included: | 0 |
Metal reflector: | 0 |
Overheat protection: | 0 |
Photo cell: | 0 |
Protection cap: | 0 |
Synchro flash cord included: | 0 |
Tilt head with tripod connection: | 0 |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
www.bresser.de
- Use compatible light sources! Ensure the light shaper matches the lamp or flash unit being used.
- Avoid overheating! Do not leave the light source switched on longer than necessary to prevent heat build-up and material damage.
- Maintain a safe distance! Do not place light shapers near curtains, paper, or other flammable objects.
- Stable mounting required! Firmly attach the light shaper to prevent tilting or falls.
- Protect from moisture! Avoid rain and wet environments to prevent damage.
- Risk of cuts! Some metal light shapers have sharp edges. Wear gloves to avoid injury.
- Fold and store carefully! Gently fold or store the light shaper to prevent tears or damage.
- Dust-free cleaning! Use a soft, dry cloth to remove dust and dirt without damaging the material.