BRESSER StarTracker Astronomical Photo Mount PM-100

Optical polar finder for fast and precise polar alignment of the BRESSER StarTracker Astrophoto Mount PM-100 art.no. 4964120. The BRESSER polar finder scope allows a very precise alignment to the celestial pole by using the illuminated crosshair and constellation markings. Simply adjust the StarTracker astrophoto mount using the tilt head or ball head in the pole height and azimuth until the constellation markings in the polar finder match the constellations in the sky - done. Ideal for optimizing tracking accuracy in astrophotography. FEATURES Optical pole finder scope with illumination To optimize the polar alignment Suitable for StarTracker Astrophoto Mount PM-100Illuminated crosshairs and constellation markings Field of view 6,5° degreesQuick and easy to use SCOPE OF DELIVERYPolar finder scopeMounting material Instruction manual  

Tripod head with fine adjustment for fast and precise pole height adjustment of the BRESSER StarTracker Astrophoto Mount PM-100 art. no. 4964120. The BRESSER Micro Motion Head MH-100 allows a very precise adjustment by using large dimensioned knurled screws. In order to keep the adjustment distances by using the knurled screws as small as possible, the mounting plate has a quick-release clamping device with toothing in order to be able to select a rough presetting of the pole height (latitude at the location). The Micro Motion Head MH-100 can be mounted on any photo tripod with 1/4 inch photo thread closure. The BRESSER StarTracker astrophoto mount can then be mounted on the MH-100 tripod head without the use of tools using a 1/4" photo thread screw. The complete  motion head is made of black anodized aluminum and guarantees highest stability by the use of solid material. The knurled screws with fine pitch thread are even made of stainless steel and guarantee a long durability and corrosion resistance. Ideal for optimizing tracking accuracy in astrophotography. IMPORTANT NOTE: Can also be used as a stable adjustment element of a telescopic sight in astrophotography. Parallel alignment of the main telescope and the guide telescope is thus also possible quickly and precisely. Base plate connection: 3 x 1/4 inch photo thread with 35.0 mm hole spacing. Mounting plate connection: 2 x M8x1.25 thread with 35.0mm hole spacing. FEATURES Compact micro motion head with fine adjustment Functions as a so-called polar-wedge For precise adjustment of polar alignment (EQ mode)Mounting plate with quick-release clamping device and toothingCan be used with any photo tripod and 1/4inch thread adapterMade of black anodised aluminium and stainless steel Quick and easy to use deviceSuitable for BRESSER StarTracker Astrophoto Mount PM-100 Suitable for BRESSER tripod TP-100 DX  Also ideal as an adjustment element of an auto-guiding scopeFor parallel alignment of main telescope and guiding telescope Base plate connection: 3 x 1/4 inch photo thread; hole spacing 35.0mm Connection mounting plate: 2 x M8x1.25mm thread; drilling distance 35,0mm SCOPE OF DELIVERY Micro Motion Head MH-100 Instruction manual

The Vixen POLARIE is a new camera accessory, that enables you to capture sharp, point-like images of the stars. It has been developed to track the stars and to compensate for the movement of the earth. POLARIE enables you to take atmospheric shots of landscapes and the night sky and can also capture these in sharp images. Extremely simple and compact design for use in every location on earth. If you have ever viewed a romantic, starry sky, you will surely have felt the desire to capture it on film. But if you have tried to do this, you will know that it’s really not all that easy. This is because you need to have multiple exposures of several minutes if you want to photograph the stars. As our earth is always turning on its axis, the stars keep moving as time passes and become long strokes on photographs. Today’s digital technology gives us the option of obtaining shorter exposure times by increasing the sensitivity of the sensor, but, unfortunately, this dramatically increases picture noise and the picture becomes very noisy and ugly. This makes it impossible to take beautiful images of the night sky. For this reason, the Vixen company has developed the Polarie Star Tracker, which eliminates the problem of star migration. When you attach your camera to the Polarie, the device will track in the opposite direction of earth’s rotation and this allows for sharp, point-like images of the starry sky even when using long exposure times. POLARIE is a new and unique camera accessory for photographing the night sky, with perfectly point-like stars being tracked. Using the simplest solution, it makes the experience of photographing the night sky more accessible for everyone. The multi-functional mode dial is adjustable for sky- and landscape-, moon-, sun- and star-tracking. Polar altimeter for a fast focus. Also included: USB connection for external power supply and a built-in compass for quick orientation. Available as optional extra accessories are a polar finder telescope for exact alignment with the celestial pole for long-exposure photography including into the telephoto range, and a tripod. FEATURES Tracking speed: Sidereal, 0.5x sidereal, sun, moon Fine adjustment: F57, 6mm worm wheel with 144 teeth Polar axis: F 40mm, aluminium alloy Drive: High-precision stepper motor: Bearing capacity: approx. 2kg incl. ball head Orientation aperture: Field of vision 8.9° vInclinometer: 0° to 70° Miscellaneous: Built-in compass (removable) Power supply: 2x AA batteries (compatible with alkaline, Ni-MH, Ni-CD batteries) or external power supply compatible with USB mini-B Drive voltage: AA batteries: DC2,4-3.0V, Max. 0.6A External power supply: DC4,4-5,25V, max. 0.3A Operating time: approx. 2 hours with alkaline batteries Approx. 20 hours with external power supply at 20°C with 2 kg load Operating temperature: 0° to 40° Dimensions: 95mm x 137mm x 58mm Weight: 740g without batteries Optional accessories available: Polar finder telescope, M-155 tripod, QPL compass, ball head WHAT’S INCLUDED 1x camera mount

Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER photo mount is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain punctiform even with long exposures. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount with tripod and polar wedge are also available as a bundle - Product No.: 4964110Which cameras are basically suitable for use with the BRESSER photo mount ? All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable. The BRESSER photo mount is designed for a camera with lens of max. 2.5 kg total weight to carry and track. Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the optical pole finder, this is done quickly.  After setting up the light and compact photo mount, simply set the approximate latitude (pole height) to the scale and aim Polaris through the illuminated pole finder scope. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ...  The tracking is carried out by a precise stepper motor, which can also be moved via the hand box with 2- or 32-fold speed in forward and reverse. Thus, the sky section can be adjusted even more precisely. Low power consumption allows up to 50 hours of operation with just one battery charge.  FEATURESEquatorial Photo-MountAutomatic siderial tracking against the Earth rotation Handbox to control the tracking motors (2x/32x)Suitable for northern and southern henisphereOptical pole finder scope with illumination unit includedBallhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 3/8" threaded bolt for ballhead mountingPhoto-Mount with 1/4" und 3/8" inner threads for tripod mountingHigh precision stepper motor with helical gear for accurate tracking Large screws and handles for easy usage at night  Battery operation or stabilized power adapter (optional acc.) Battery life: up to 50 hoursPower connector at handbox: 6 volts DC jack 5.5/2.5mm (positive pole at center pin)Weight Photo-Mont with ballhead: 1.4 kg Load capacity of Photo-Mount: up to 2.5 kgSCOPE OF DELIVERYFoto-Mount headTracking motor with HandboxBallhead with quick release saddle plate Pole finder scope with illumination unitBattery compartment 6 volts with case (no D-batteries included)Manual   

The POLARIE U is an ultra-compact automatic star tracking device that can be easily transported.In addition to the functions of conventional star trackers, which track a camera for a long exposures, accurately tracking the regular movement of celestial objects, the POLARIE U has a speed adjustment function, which allows it to be used as a panning mount too for time lapse photography.Using a smartphone, you can control the shutter release intervals of the images. Through the communication between the smartphone and the POLARIE U Star Tracker, you can control the exposures and take beautiful, sharp pictures of the stars and the Milky Way without getting any star trailing.The Star Tracker is very small and light weight, making it ideal for mobile use or air travel.The Vixen POLARIE U Star Tracker in detail:Star-scape photography (stars and landscape).A silhouetted landscape on earth is photographed together with the starry sky. The beauty of a landscape and the starry sky can be shown together on one photo. POLARIE U opens up a wonderful foreign world of star-scape photography and makes this possible for both beginners and advanced photographers.Conventional telescopic astrophotography photographs a relatively narrow area of the sky. Star-scape photography mainly uses a wide-angle lens and takes impressive photos in which stars, and other celestial targets such as the majestic Milky Way and landscapes are combined. The possibilities of the compositions are endless and a completely new kind of landscape photography opens up.Weight reduction of more than 20% and improved load capacity.The structure of the original POLARIE has been completely changed. The distance between the two bearings that support the rotating shaft is about four times the distance of the previous model. This leads to a higher load capacity despite the weight reduction of 20%. The maximum load capacity is 2.5 kg (approx. 2.5 kg at 10 cm from the centre of rotation) when used for wide-field astrophotography. The maximum load capacity is increased to 6.5 kg (approx. 6.5 kg at 10 cm from the centre of rotation) when a POLARIE Multi mounting block (optional) and a dovetail slide rail DD (optional) are combined. In addition, used in vertical configuration, the POLARIE U can reach a load capacity of 10 kg (approx. 10 kg 10 cm from the centre of rotation) for time-lapse photography and is therefore suitable for heavy camera equipment.Settings via SmartphoneCommunication between tracker and smartphone via the Vixen Polarie U App enables various settings via smartphones or tablet. For star/landscape photography, the speed is selected in user-defined mode, and for time-lapse photography, settings for interval time, exposure, and rotation speed can also be easily programmed.Five different speeds:Star-scape photography (half star speed). This setting is intended for displaying a landscape together with the starry sky. The stars are not tracked exactly, but slower in order not to blur the landscape in the foreground. This way you get beautiful images of the landscape and the starry sky.Wide Field Astrophotography (Star Speed)When this mode is selected, the POLARIE U follows the stars at the same speed as the daily movement of the stars. In this mode, widefield long time exposures of comets, nebulae, star clusters and the Milky Way are made and tracked precisely.Solar Tracking (solar speed)For recording solar eclipses over a long period of time.Moon Tracking (moon speed)For recording lunar eclipses over a long period of time.Custom ModeThis allows you to set the POLARIE U to the desired tracking speed. The initial setting is four times the star speed. If you want to change the setting for a different speed, a smartphone or other wifi device and application software are required.Shoot-Move-Shoot ModeIt is possible to stop the movement of the camera during the exposure and restart it after the end of the exposure. It is also equipped with a camera connector (shutter release) that controls the camera shutter during shooting with SMS or interval shooting. If the camera in use is connected with the cable release, the settings can be easily adjusted using a smartphone. A Wi-Fi connection is required when using this feature. An additional cable is required to connect the camera and POLARIE U together.Autoguider portCommercially available autoguiders can be used with the POLARIE U (Usable only in R.A.).  An important new feature over the original Polarie - attach a small Guidescope, or Off Axis Guider and autoguiding camera to your main camera and use the standard ST-4 protocol port to guide the Polarie U in Right Ascension, ensuring absolute accuracy of tracking (requires additional separate computer, or standalone guider). FEATURES    Speeds: Sidereal rate, 0.5X star speed, sun, moon. North / South hemisphere compatible    Operating System: Android 4.4 and over or iOS 9.9 and over Wi-Fi: IEEE 802.11b/g    Worm gear: RA gear rim with 144 teeth (58.4 mm Al alloy)    Screw: 9.8 mm brass    RA and DC axis: 40mm, aluminium alloy    Motor drive: electric motor drive with impulse motor (stepper motor)    Load capacity: 2.5 kg standard, 6.5 kg with special accessories, 10 kg with fast motion    Wi-Fi function for Smartphone    Direction finder tube: 8.9 degree field of view without magnification.    Power supply: USB Type-C or 4x AA batteries    Dimensions: 88.5mm x 72mm x 110.5mm    Weight: 575gSCOPE OF DELIVERY    POLARIE U Star Tracker    Attachable direction finder

Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort? The BRESSER StarTracker Astronomical Photo Mount Kit is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain in pinpoint shape even with long exposures. This set contains all the components required for a quick and comfortable entry into the world of astrophotography with the exception of a camera and objective lens: A stable BRESSER tripod TP-100 DX with carrying bag, the BRESSER Micro Motion Head MH-100 (polar-wedge), the BRESSER Polar Finder Scope for StarTracker PM-100 and of course the BRESSER StarTracker astrophoto mount PM-100 with ball head.Which cameras are basically suitable for use with the BRESSER photo mount? All cameras with 1/4'' (6.3mm) tripod connection thread and bulb length B for long exposure are suitable. The BRESSER StarTracker Astronomical Photo Mount PM-100 is designed for a camera with lens of max. 2.0 kg total weight to carry and track in polar mode. In Azimut mode also a camera weight up to 5.0kg is possible.  Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the delievered optical Polar Finder Scope, this is done quickly. After setting up the light and compact StarTracker Photo Mount, simply set the approximate latitude (pole height) and aim Polaris through the integrated Polar Finder Scope. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ... The tracking is carried out by a precise stepper motor, which can be controlled by an easy digital setup on LCD screen. Low power consumption allows up to 20 hours of operation with just one battery charge or simply use the micro USB port for an unlimited power supply. Typically achievable exposure times with good tracking accuracy are: 16mm wide-angle lens: 5 minutes (300 sec.) , 100mm telephoto lens: 1 minute (60 sec.) FEATURES StarTracker Astronomical Photo Mount Kit Equatorial StarTracker Photo-MountAutomatic siderial tracking against the Earth rotation  Different tracking speed setting possible Suitable for northern and southern henisphere Time lapse: from 15 minutes to 48 hours Ballhead with quick release saddle plate and 1/4'' Photo thread for Kamera mountingPhoto-Mount with 1/4'' threaded bolt for ballhead mounting Additional quick release coupling for ball head removal High precision stepper motor with helical gear for accurate tracking Clear LCD screen and easy setup menu Battery operation 4 x AA batteries or mico USB (optional acc.)  Battery life: up to 20 hours Weight Photo-Mont: 0.63kgTransport weight incl. complete accessories: 3.6 kg Adjustment height mount with tripod: 80-155cm Tripod transport dimensions: 60x10x10cm; tripod weight: 2,1 kg Load capacity of Photo-Mount: up to 2.0kg/5.0kg (EQ/AZ) SCOPE OF DELIVERY BRESSER StarTracker astronomical Photo-Mount PM-100BRESSER Ballhead with quick release saddle plateBRESSER Polar Finder Scope for StarTracker PM-100BRESSER Micro Motion Head MH-100 (Polar-Wedge)BRESSER Tripod TP-100 DX with carry bag User manual 

Finally, a universal tracking kit is available, which is easy to assemble and handle. Consisting of a telescopic sight, a tracking camera and the required prism clamp you can start long-term photography with active tracking control (autoguiding). Simply mount the prism clamp with the mounting screws on the carrying handle of the BRESSER Messier and EXPLORE-SCIENTIFIC telescopes and the AR90 / 500 guide scope with tracking camera can already be fixed stably parallel to the main telescope. The tracking camera is now connected directly to the ST-4 compatible autoguider socket of your telescope mount. Connecting the tracking camera via USB cable to your Windows computer and install the camera drivers and any Autoguider software - you can start with the astrophotography. The prism clamp has 2 x 6mm countersunk holes (35mm hole spacing) and 3 further 1/4 "photo tapped holes to allow for versatile adaptation to a variety of other telescopes and adapter plates. The tracking camera is very useful for tracking Recording of planets and even deep-sky objects. A detailed description of the tracking camera can be found at the BRESSER article number 4959050. NOTE: It is necessary to mount the camera on the telescope using the diagonal mirror so that focusing will work.NOTE: The autoguider software is not included. You can use PHD Guiding, Guidedog, Metaguide, Guidemaster (Freeware) or AstroArt, MaxIm DL (chargeable).DOWNLOAD PHD-Guiding: http://www.stark-labs.com/phdguiding.html DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html FEATURES Universal BRESSER Guiding Kit Guiding-scope, guiding-camera and dovetail clamp included For long exposure Astrophotography with autoguiding Aperture of guiding-scope: 90mm Focal length of guiding-scope: 500mm Screw set for Messier/ES handle included Fits also to many other telescopes SCOPE OF DELIVERY Guiding-scope BRESSER Messier AR90/500 (Art.Nr. 4890500) + Acc. Guiding-camera BRESSER GPCMOS02000KPA color (Art.Nr. 4959050) Dovetail-clamp for Messier/ES/GP/Vixen (Art.Nr. 4910220) Screw-set for Messier/ES handle included USB 2.0 cable (camera to computer) ST-4 cable (camera to teleskope mount) Camera driver software + ASCOM driver Professional ToupSky imaging softwareAperture solar filter for solar observing included