BRESSER Stereo Microscope Advance ICD 10x-160x Zoom with MikroCam PRO HDMI Autofocus Microscope Camera

This is an all purpose instrument amongst the BRESSER microscopes: Being a stereo microscope, which is manufactured in high quality, it offers the option of the biological style, too. This model has  upper and lower LED illuminators for each type of microscope style, which can be operated independently or together. The total intensity of the illuminators can be varied with a dimmer. The binocular head is 360° turnable and provides a comfortable view in all observing positions. The eyepieces can be set on the individual eye relief and with a diopter adjustment on the users eyesight. The microscope performs images, which are rich in details and in contrast. FEATUREScombined stereo/biological microscope360° rotatable binocular viewadjustable eye distance and diopter adjustmentobjective magnification 2x/ 4x switchableSCOPE OF DELIVERYstereo microscope2x eyepiece: 10x and 20xglass stage and black/white stagemains adapterdust cover

The zoom stereo microscope BRESSER Advance ICD is suitable for a wide variety of objects. Because of the Greenough design with two tilted objectives, you can view the sample in 3D. The three-dimensional view is also very helpful when working under the microscope, e.g. when soldering, dissecting or preparing a sample.The precise zoom enables you to view your sample in a wide range of magnifications from 1x to 4x (zoom ratio 4.0). When zooming, only slight refocussing is necessary. To do this, the Advance ICD microscope is equipped with a very precise, coaxial coarse and fine focus. The fine focus is especially helpful when using high magnifications or for imaging. When doing focus stacking with our MikroCam cameras (optional) the fine focus is also a big help.The interpupillary distance of the eyepiece pair is adjustable. Both eyepiece holders are equipped with diopter adjustment, which allows users with bad eyesight to compensate up to 8 dpt. difference between left and right eye. The 10x wide field eyepieces have field number (FN) 22 and are equipped with soft rubber eyecups. The microscope head can be moved on the long rod of the stand, which allows you to observe big samples up to a size of 22 cm.The angle of the bright LED reflected light illumination can be adjusted as necessary. The extra bright and even LED transmitted light provides a flat background when viewing transparent samples. The switch allows you to select reflected light, transmitted light or a combination of both to match your requirements. Brightness is adjustable with the dimmer. The bright light does not heat up, which allows you to observe also living specimens over a longer period of time. The long lasting LED is powered by a 5V AC adapter (EU/UK). The power cable comes with a USB plug.Fully equipped, the Advance ICD covers an exceptionally wide range of magnifications and is therefore suitable for a variety of tasks. Besides the included 2x lens there is also a selection of other auxiliary objectives available. With these, you are able to adjust magnification, working distance and depth of focus according to your needs.Magnifications in basic setting (no optional accessories):10x eyepieces: 10x – 40x10x eyepieces plus 2x auxiliary lens: 20x – 80x20x eyepieces: 20x – 80x20x eyepieces plus 2x auxiliary lens: 80x – 160x(other magnifications are possible when using other auxiliary lenses and/or eyepieces)The third tube is designed to permanently attach a camera. The image of the left eyepiece is diverted to the camera port with a lever/switch. We supply a selection of camera adapters for DSLR, mirrorless cameras and c-mount microscope cameras. This enables you to attach virtually any camera body as long as you have a model with interchangeable lens.APPLICATION RANGEQuality control in industryMaterials scienceLaboratoryBotany, gardening, farmingHydrology, aquaculture, fishkeepingInsects, Entomology, pest controlPlant physiology, raw food materials, medicinal herbsSchools, teachingFEATURESTrinocular head with 2 eyepieces and camera port with switchCompatible with BRESSER MikroCam cameras and others1x-4x stereo-zoom head2x auxiliary lensDiopter adjustment on both eyepiece holdersAdjustable interpupillary distance (52 – 72 mm)Bright LED light (reflected / transmitted)2 different object plates for best contrastView samples of up to 22 cm heightAC adapter Euro/UK (5V / 1000 mA) with USBHeavy build with metal standIncludes 2 pairs of widefield eyepiecesSCOPE OF DELIVERYMicroscope2 pairs of eyepieces (WF 10x / WF 20x)2x auxiliar lens (1 pcs)1 pair of rubber eyecupsObject plate 94 mm (black / white)Glass object plate 94 mm (matte)AC adapter Euro/UK (5V / 1000 mA)Dust coverPrinted manual

Powerful combination set for precise observations and sharp representations. This high-quality set combines the professional digital microscope DST-0745, the modern microscope camera MikroCam PRO HDMI 5MP, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live displays.The microscope in detailThe BRESSER DST-0745 is a special microscope that operates with a C-Mount camera (not included).Thus, direct viewing on a screen is possible. Due to the vertically mounted optics, there is no image shift when focusing. This is especially advantageous for "focus stacking" shots.The zoom is continuously adjustable from 0.7x to 4.5x. A coarse and fine focus makes focusing easier, especially at high magnifications.Due to the convenient and user-friendly operation, the digital microscope is particularly suitable for daily use in the workshop. Measurements, quality controls of surfaces, or checking components and raw materials become easy with the workshop microscope. Insects, plants, and rocks are also impressively displayed.The DST-0745 workshop microscope is not suitable for visual observation, as it is only a zoom lens. It is used in conjunction with a MikroCam C-Mount.It is designed for camera sensors of about 1/2".With the two flexible incident light lamps, the light can be optimally positioned.The transmitted light illumination helps in observing transparent objects. The brightness of both illuminations can be adjusted in five levels.The magnification of a USB camera differs from the objective magnification. Therefore, a total magnification of the digital system cannot be specified. It depends on the sensor size and the display on a monitor.Compatible MikroCam cameras:5914122 MikroCam SF Full HD5914321 MikroCam SP 3.1 MP5914520 MikroCam SP 5.0 MP5914522 MikroCam SF 5.0 MP5914822 MikroCam SF UHD5914912 MikroCamII 12MP USB 3.05914170 MikroCam MINI Full HD HDMI5914185 MikroCam PRO HDMI 5MP5914190 MikroCam Pro HDMI AutofocusFEATURES OF THE MICROSCOPEDesigned for C-Mount microscope camerasUp to 1/2" sensor size is suitableMax. object height: 190 mmContinuously adjustable zoom (0.7x - 4.5x)Two flexible incident light LED lampsLED transmitted light illuminationAdjustable brightnessSCOPE OF DELIVERY OF THE MICROSCOPEZoom objective head 0.7x - 4.5xStand with incident and transmitted light illuminationGlass object plate (one side frosted)Plastic object plate (one side white, one side black)Power supply, user manual, dust coverThe microscope camera in detailThe BRESSER MikroCam PRO HDMI 5MP impresses with its excellent image quality while also being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera and provides brilliant and high-contrast images.For high-resolution micro photos, this camera features a high-quality Sony 5MP sensor, allowing images and videos to be saved on an SD card with higher resolution than Full HD.The operation of the camera functions is done via mouse directly on the screen menu. Through the screen menu, measurements can also be performed, making your microscope with the MikroCam Pro HDMI 5MP a fully functional digital measuring microscope.Additionally, the camera can also provide the microscope view in a wireless network via WiFi module. However, a connection to the PC via USB is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI model 5914180.The professional software MikroCamLabII is still included, allowing images to be edited and evaluated later with the software.Software for image evaluation included in the following languages(no direct image capture via USB possible)GermanEnglishFrenchPolishTurkishIndonesianJapaneseSimplified ChineseTraditional ChineseThe software features numerous functions for image processingMeasurement function (additional object micrometer required, e.g., Bresser article no. 5916720): lengths, angles, areas (polygons, circles, ellipses)Image stacking from video filesFluorescence microscopy: data for numerous fluorophores are stored in the softwareBatch savingHDR (High Dynamic Range)FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via screen menu (object micrometer Art. No. 5916720 for calibration necessary)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY OF THE MICROSCOPE CAMERAMikroCam Pro HDMI 5MP with C-Mount threadPower supplyMouseHDMI cableWiFi moduleSoftware (CD-ROM)The display in detailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be directly mounted on the camera with an adjustable holder. The screen provides brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! Thus, several people can also view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The display via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems like floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so that cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done with two screws. Screws and tools are included.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

Professional complete set for precise analyses and high-resolution image results: This powerful set combines the high-quality Advance ICD stereo microscope with the modern MikroCamII 12 MP camera and a 0.5x reduction lens. It is ideal for fine detail observations and high-resolution images, ensuring reliable documentation of your results.The microscope in detailThe BRESSER Advance ICD is suitable as a zoom stereo loupe for various observations. Objects appear three-dimensional and plastic due to the Greenough design with two inclined objectives. The 3D image also makes working with tools (e.g. preparing, dissecting, soldering) much easier.The zoom allows stepless adjustment of magnification with a zoom factor of 4.0 (1x-4x). Only minimal refocusing is needed when zooming. For this, the Advance ICD has a coaxial focusing drive with coarse and fine adjustment. This allows particularly sensitive focusing at high magnifications or for photography. The fine focus is also a great aid for focus stacking, e.g. with our MikroCam cameras (optional).The interpupillary distance is individually adjustable. Both eyepiece holders have a dioptre adjustment, allowing differences in visual acuity of up to approx. 8 dpt between the left and right eye to be compensated. The 10x widefield eyepieces with a field number of 22 are equipped with removable rubber eyecups. The microscope head can be adjusted very far in height on the stand rod. This allows observation of very large objects up to an object height of approx. 22 cm.The bright LED incident illumination is adjustable in inclination. The particularly even and bright LED transmitted illumination provides a homogeneous background for transmitted light specimens. The illumination can be set with a toggle switch, so incident and transmitted light can be used separately or together depending on the type of sample. You can conveniently adjust the brightness with the dimmer. The bright LED illumination produces no heat, so living samples can be safely observed over a longer period. A low-power 5V power adapter (with Euro and UK adapter) is used to power the long-lasting LED illumination. The power cable has a USB connection on one side.The Advance ICD can be used in many ways due to the large magnification range. In addition to the included 2x auxiliary lens, further additional objectives are available, allowing you to vary and adapt the magnification range, working distance, and depth of field even further to your requirements. These magnifications are possible in the basic configuration:10x eyepieces: 10x - 40x10x eyepieces plus 2x auxiliary lens: 20x - 80x20x eyepieces: 20x - 80x20x eyepieces plus 2x auxiliary lens: 80x - 160x(further magnifications possible with optional additional objectives or eyepiece magnifications)The third tube is designed for connecting a camera. A switch diverts the image from the left objective to the camera tube. Various adapters and reduction optics are available for C-mount cameras and DSLR or system cameras, so practically all cameras with removable lenses can be connected. APPLICATION AREASQuality control in industryMaterial testingLaboratoryBotany, horticulture, agricultureHydrology, aquaculture, aquaristics, marine biologyInsects, entomology, pest controlPlant physiology, raw materials, medicinal drugsSchool, teaching MICROSCOPE FEATURESTrinocular microscope head for visual observation and camera use with switchCompatible, among others, with BRESSER MikroCams (optional)1x-4x stereo zoom objective2x auxiliary lens (doubles magnification through eyepieces and zoom objective)Dioptre compensation in both eyepiece holdersAdjustable interpupillary distance (52 - 72 mm)Bright LED illumination (incident/transmitted light)2 different object plates for optimal contrast to the objectObservation of three-dimensional objects up to approx. 22 cm height possiblePower adapter Euro/UK (5V / 1,000 mA) with USB connectionRobust design with heavy base2 pairs of widefield eyepieces includedMICROSCOPE SCOPE OF DELIVERYMicroscope2 pairs of widefield eyepieces (WF 10x / WF 20x)2x auxiliary lens (1 piece)1 pair of rubber eyecupsPlastic object plate 94 mm (black/white)Glass object plate 94 mm (matte)Power adapter Euro/UK (5V / 1,000 mA)Dust coverOperating instructionsThe microscope camera in detailThe BRESSER MikroCam II cameras enable easy photo and video recording with a microscope. The modern Sony® CMOS sensors deliver brilliant colours with overall very low image noise and are thus the perfect solution for applications where natural colour reproduction is important. The included recording software offers numerous settings for capturing single images and videos. An integrated measurement function* allows measurement already in the live image. The included software supports the following languages: German, English, French, Polish, Turkish, Chinese. The housing has a C-mount connection thread. For use on devices with 23.2 mm mount, an optional variable 0.5x reduction optic (Art. No. 5914005) is available. For special applications, the camera can also be mounted on the integrated 1/4'' tripod thread. The BRESSER MikroCamII are equipped with a USB 3.0 connection compared to the MikroCam SP. This allows up to 8x higher data rates than USB 2.0 connections. The cameras can thus transmit more than 25 frames per second (depending on resolution, exposure time, and computer performance). This is especially important for living microorganisms. The camera is exceptionally light-sensitive, so short exposure times can be used even at high magnifications or demanding contrast methods. MICROSCOPE CAMERA FEATURESHigh-quality metal housingMany software functions, such as measurement, focus stacking (overlaying multiple images for increased depth of field), mosaic (to display larger image fields)Image and video recording, including time-lapse functionGood compatibility with various microscopesHigh-speed USB 3.0 connectionModern Sony® IMX226 sensor 7.53 mm x 5.64 mm (1/1.7'') SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 3.0, 3.1 MICROSCOPE CAMERA SCOPE OF DELIVERYCamera headUSB 3.0 cable23.2 mm adapter, 30 mm and 30.5 mmRecording and image processing software (for Windows)

BRESSER LED Red Dot Viewfinder for Carbon Look TelescopesCategory: Spare Part for Carbon Look Telescope SeriesDescription: The precise LED Red Dot Viewfinder for Carbon Look Telescopes facilitates easy finding of celestial objects. Quick mounting and adjustment. Suitable for the BRESSER Carbon Look Telescope series as a spare part.

Professional complete set for precise analyses and routine observations: This powerful set combines the high-quality Advance ICD stereo microscope with the modern MikroCam SF UHD camera and a 0.5x reduction lens. It is ideal for fine detail observations, sharp live images, and reliable documentation of your results.The microscope in detailThe BRESSER Advance ICD is suitable as a zoom stereo loupe for a wide range of observations. Objects appear three-dimensional and plastic due to the Greenough design with two inclined objectives. The 3D image also makes working with tools (e.g. preparing, dissecting, soldering) much easier.The zoom allows stepless adjustment of magnification with a zoom factor of 4.0 (1x-4x). Only minimal refocusing is required when zooming. For this, the Advance ICD has a coaxial focusing drive with coarse and fine adjustment. This allows particularly sensitive focusing, especially at high magnifications or for photography. The fine focus is also a great aid for focus stacking, e.g. with our MikroCam cameras (optional).The interpupillary distance is individually adjustable. Both eyepiece holders have a dioptre adjustment, allowing differences in visual acuity of up to approx. 8 dpt between the left and right eye to be compensated. The 10x widefield eyepieces with a field number of 22 are equipped with removable rubber eyecups. The microscope head can be adjusted very far in height on the stand rod. This allows very large objects up to an object height of approx. 22 cm to be observed.The bright LED incident light illumination is adjustable in its inclination. The particularly even and bright LED transmitted light illumination provides a homogeneous background for transmitted light specimens. The illumination can be set with a toggle switch, so incident and transmitted light can be used separately or together depending on the type of sample. You can conveniently adjust the brightness with the dimmer. The bright LED illumination produces no heat, so living samples can be safely observed over a longer period. A low-power 5V power adapter (with Euro and UK adapter) is used to power the long-lasting LED illumination. The power cable has a USB connector on one side.The Advance ICD can be used in many ways due to the large magnification range. In addition to the included 2x auxiliary lens, further additional objectives are available, allowing you to vary and adapt the magnification range, working distance, and depth of field even further to your requirements. These magnifications are possible in the basic configuration:10x eyepieces: 10x - 40x10x eyepieces plus 2x auxiliary lens: 20x - 80x20x eyepieces: 20x - 80x20x eyepieces plus 2x auxiliary lens: 80x - 160x(further magnifications possible with optional additional objectives or eyepiece magnifications)The third tube is designed for connecting a camera. A switch deflects the image from the left objective to the camera tube. Various adapters and reduction optics are available for C-mount cameras and DSLR or system cameras, so practically all cameras with removable lenses can be connected. APPLICATION AREASQuality control in industryMaterial testingLaboratoryBotany, horticulture, agricultureHydrology, aquaculture, aquaristics, marine biologyInsects, entomology, pest controlPlant physiology, raw materials, medicinal drugsSchool, teaching MICROSCOPE FEATURESTrinocular microscope head for visual observation and camera use with switchCompatible, among others, with BRESSER MikroCams (optional)1x-4x stereo zoom objective2x auxiliary lens (doubles magnification through eyepieces and zoom objective)Dioptre compensation in both eyepiece holdersAdjustable interpupillary distance (52 - 72 mm)Bright LED illumination (incident/transmitted light)2 different object plates for optimal contrast to the objectObservation of three-dimensional objects up to approx. 22 cm height possiblePower adapter Euro/UK (5V / 1,000 mA) with USB connectionRobust design with heavy base2 pairs of widefield eyepieces includedMICROSCOPE SCOPE OF DELIVERYMicroscope2 pairs of widefield eyepieces (WF 10x / WF 20x)2x auxiliary lens (1 piece)1 pair of rubber eyecupsPlastic object plate 94 mm (black/white)Glass object plate 94 mm (matte)Power adapter Euro/UK (5V / 1,000 mA)Dust coverOperating instructionsThe microscope camera in detailThe BRESSER MikroCam SF cameras are excellent for taking photos and videos with a microscope. This allows observations of objects to be easily documented and shared with others. The high frame rate of the MikroCam SF series enables the creation of videos with smooth image flow. The built-in Sony sensors offer good image quality, colour reproduction, and dynamics. The included software supports, among others, the following languages: German, English, French, Spanish, Italian, Polish, Turkish. The MikroCamLabII software offers a wide range of functions. Essential functions (e.g. exposure time and sensitivity) can be controlled automatically or manually.Very convenient are the functions for so-called focus stacking (for high depth of field) and the creation of a mosaic or panorama. These two functions can be performed with a previously recorded image series or directly from the live view. Creating depth-sharp images using live focus stacking (EDF) is possible within minutes with the MikroCamLabII software. While you focus on the microscope, the software gradually builds the finished, completely sharp result image without further input. This way, you get impressive, sharp image results in a very short time.The measurement function* included in the software helps you determine sizes or display a scale. You can measure distances, angles, or areas with just a few clicks. Extensive functions support you, e.g. measuring circles with area and radius or even complex polygons. Measurements can be performed on the recorded image as well as in the live image. The MikroCamLabII software also has extensive algorithms for automated image evaluation, e.g. for particle counting or area evaluation. The housing has a C-mount thread and can therefore be used on microscopes from various manufacturers. We are happy to advise you which MikroCam is optimally suitable for your microscope. For use on devices with a 23.2 mm mount, an optional 0.5x reduction optic (Art. No. 5914015 (fixed), Art. No. 5914005 (variable)) is available. For special applications, e.g. with a C-mount lens, the camera can also be mounted on the integrated 1/4" tripod thread. *For calibration of the measurement function, a suitable measuring tool is required, e.g.: Art. No. 5916710 or 5916720. MICROSCOPE CAMERA FEATURES 3840x2160 pixel sensor (UHD), 6.22 x 3.5 mm (1/2.5") Frame rate: up to 30 fps High-quality metal housing Many software functions such as measurement, focus stacking (overlaying multiple shots for increased depth of field), mosaic (for displaying larger image fields) Image and video recording, including time-lapse function Compatible with microscopes of all manufacturers SYSTEM REQUIREMENTS Windows 10 or 11 Intel i3, i5, i7 or i9 processor from 6th generation or higher or AMD FX or Ryzen processor from 1st generation Internet connection for software download Minimum USB 2.0 MICROSCOPE CAMERA SCOPE OF DELIVERY Camera head USB 2.0 cable (approx. 1.8 m) Plug adapters for 23.2 mm, 30 mm and 30.5 mm eyepiece tubes CamLabLite software as download link, language versions German, English, French, Spanish, Catalan, Italian, Turkish, Russian, Polish, Portuguese, Indonesian, Chinese, Bulgarian

NOTE: This item is a used or returned product. This means: The item may show slight signs of use; some accessories may be missing; the packaging may differ from the original packaging. Please note that refurbished items generally come with a 12-month warranty.