BRESSER Stereo Microscope Advance ICD 10x-160x Zoom with MikroCam PRO HDMI Autofocus Microscope Camera and Full HD MINI HDMI Display (13.3")

Powerful combo set for precise observations and sharp images. This high-quality set combines the professional Advance ICD stereo microscope, the modern MikroCam Mini HDMI microscope camera, a 0.5x reduction lens, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live presentations.The Microscope in DetailThe BRESSER Advance ICD is suitable as a zoom stereo loupe for a wide range of observations. Objects appear three-dimensional and lifelike through the Greenough design with two inclined objectives. The 3D image also makes working with tools (e.g. preparing, dissecting, soldering) much easier.The zoom allows stepless adjustment of magnification with a zoom factor of 4.0 (1x-4x). Only minimal refocusing is needed when zooming. For this, the Advance ICD has a coaxial focusing drive with coarse and fine adjustment. This allows particularly sensitive focusing at high magnifications or for photography. The fine focus is also a great aid for focus stacking, e.g. with our MikroCam cameras (optional).The interpupillary distance is individually adjustable. Both eyepiece holders have a dioptre adjustment, allowing differences in visual acuity of up to approx. 8 dpt between the left and right eye to be compensated. The 10x widefield eyepieces with a field number of 22 are equipped with removable rubber eyecups. The microscope head can be adjusted very far up and down on the stand rod. This allows very large objects up to approx. 22 cm in height to be observed.The bright LED incident illumination is tilt-adjustable. The particularly even and bright LED transmitted illumination provides a homogeneous background for transmitted light specimens. The illumination can be switched so that incident and transmitted light can be used separately or together depending on the sample type. Brightness is conveniently controlled with the dimmer. The bright LED illumination produces no heat, so living samples can be safely observed for extended periods. A low-power 5V power adapter (with Euro and UK adapters) is used to power the long-lasting LED illumination. The power cable has a USB connector on one side.The Advance ICD can be used in many ways due to its large magnification range. In addition to the included 2x auxiliary lens, further additional objectives are available, allowing you to vary and adapt the magnification range, working distance, and depth of field even further to your requirements.The following magnifications are possible in the basic configuration:10x eyepieces: 10x - 40x10x eyepieces plus 2x auxiliary lens: 20x - 80x20x eyepieces: 20x - 80x20x eyepieces plus 2x auxiliary lens: 80x - 160x(further magnifications possible with optional additional objectives or eyepiece magnifications)The third tube is designed for connecting a camera. A switch diverts the image from the left objective to the camera tube. Various adapters and reduction optics are available for C-mount cameras and DSLR or system cameras, so practically all cameras with removable lenses can be connected.APPLICATION AREASQuality control in industryMaterial testingLaboratoryBotany, horticulture, agricultureHydrology, aquaculture, aquaristics, marine biologyInsects, entomology, pest controlPlant physiology, raw materials, medicinal drugsSchool, teachingMICROSCOPE FEATURESTrinocular microscope head for visual observation and camera use with switchCompatible with e.g. BRESSER MikroCams (optional)1x-4x stereo zoom objective2x auxiliary lens (doubles magnification through eyepieces and zoom objective)Dioptre compensation in both eyepiece holdersAdjustable interpupillary distance (52 - 72 mm)Bright LED illumination (incident/transmitted light)2 different object plates for optimal contrast to the objectObservation of three-dimensional objects up to approx. 22 cm height possiblePower adapter Euro/UK (5V / 1,000 mA) with USB connectorRobust design with heavy base2 pairs of widefield eyepieces includedMICROSCOPE SCOPE OF DELIVERYMicroscope2 pairs of widefield eyepieces (WF 10x / WF 20x)2x auxiliary lens (1 piece)1 pair of rubber eyecupsPlastic object plate 94 mm (black/white)Glass object plate 94 mm (matte)Power adapter Euro/UK (5V / 1,000 mA)Dust coverOperating instructionsThe Microscope Camera in DetailThe MikroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required to operate the camera; you can simply connect the MikroCam MINI Full HD HDMI to an existing monitor, TV, projector or smartboard. This makes it ideal for use in teaching. Alternatively, a small BRESSER monitor can be mounted directly on the camera (see item no. 5914120).The HDMI connection is easy to make and the camera is ready to use immediately. No software installation or PC setup is necessary. The lossless data transmission achieves very good image quality and the image is always displayed with a consistently high frame rate of 60 fps and without delay. This is especially advantageous when digitising a microscope workstation, e.g. in quality control or production.The supplied USB mouse is connected for control. This allows the three menus (camera settings, measurement* and display) to be controlled.*To perform measurements with the camera, a calibration slide is required (e.g. item no.: 5916710 or 5916720).The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and mouse pointer are then not visible.Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for this. The USB port is only for controlling the camera with the mouse.MICROSCOPE CAMERA FEATURESHDMI connection for direct connection to a monitor, TV, projector or smartboardC-mount thread for easy adaptability to various microscopes (manufacturer-independent)Compatible with USB sticks or SD card readers (max. storage size: 512 GB)No PC/laptop necessaryMICROSCOPE CAMERA SCOPE OF DELIVERYMikroCam MINI Full HD HDMI with C-mount connectionPower supply (12 V / 2A)USB mouseHDMI cable (approx. 1.5 m)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the camera's output image. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and simultaneously view the image on the monitor. The display delivers optimal image quality with a wide viewing angle of 178°! This allows several people to view the image without loss of quality.The image from the microscope camera is always displayed on the HDMI screen without delay and with a high refresh rate of 60 FPS. Displaying via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from improved ergonomics when viewing the image on the HDMI display. Especially higher magnifications with their high numerical aperture are unpleasant for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable short, angled HDMI cable is also included, so cable clutter at the workstation is avoided.The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.DISPLAY FEATURES16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINIWide viewing angle (178°)No separate power supply necessarySCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Allen keyOperating instructions

The Analyth STR Trino has 3 different objective magnifications that can be changed simply by turning the objective. This means that the magnifications 10x, 20x and 40x can be changed directly. The stereo design shows structured objects particularly vividly and three-dimensionally. The low,10x initial magnification is particularly suitable for working with children. Objects up to 20mm in size can be viewed in their entirety. The Analyth STR is therefore particularly flexible to use. It is suitable for insects, plants, minerals and much more and has its areas of application in hobby, school and work. The stereomicroscope can be used for quality control, in horticulture and agriculture, for hydrology and much more. The trinocular tube enables the comfortable connection of a camera. The microscope is compatible (depending on the adapter) for microscope cameras, SLR and system cameras. Ask us which adapter you need. The interpupillary distance and dioptric compensation are individually adjustable. The eyepieces have a large field of view of 20mm. They are equipped with removable rubber eyecups and secured against removal. The microscope can be powered either with the mains adapter or with 3 batteries (not included). This means that it can also be used on the move, for example outside in the garden or on an excursion. PROPERTIES Microscope with 3 pairs of objectives, objective magnifications 1x; 2x; 4x Wide field eyepieces with eyecups and 20mm field of view Trinocular tube with 23.2mm mount Bright, economical LED illumination Illumination for incident and transmitted light can be switched separately Dimmer via membrane keys with status display Two specimen plates (black/white or glass matt), with specimen clips Dust cover Operating instructions Stand with LED illumination, separately or jointly switchable or dimmable SCOPE OF DELIVERY Microscope with 3 magnifications, 10x; 20x; 40x Trinocular tube Metal stand with LED illumination, power supply and battery compartment 2 eyepieces with rubber eyecups Glass object plate Plastic object plate (black/white) Dust cover Operating instructions

The Analyth LCD microscope is particularly suitable for observations in incident-light. With its zoom optics, the incident-light microscope enables fast and optimal magnification for quality control of fine structures and small objects. The screen with a 22.5 cm diagonal ensures comfortable observation of the sample. The simple and user-friendly operation makes the digital microscope particularly suitable for daily use in the workshop or studio. Measurements, quality control of surfaces or examination of components and raw materials become easy with the workshop microscope. Insects, plants and minerals are also impressively displayed. With its incident light ring illumination with 21 LEDs, the workshop microscope gives uniform, shadow-free illumination of the object.The observation of transparent objects is made possible with the integrated transmitted-light illumination. Both illumination options can be set separately in 5 brightness levels each and ensure optimal illumination of the slide. At high magnifications, coarse and fine focusing ensure precise sharpening. Analyses become simple and efficient with the workshop microscope, even for inexperienced users. Photos and videos can be simply saved to an SD card. With an USB-mouse controlling the slides can be done via on-screen menu.No Computer is required to use the digital microscope. Measurements can also be taken with an optional calibration slide (e.g. art. no. 5916720). TECHNICAL DETAILS:Stepless zoom (0,7x - 4,5x)Field of view at lowest magnification 17.5mm x 10.0mmField of view at highest magnification 4.7mm x 2.5mmMagnification on the integrated screen: approx. 8.2x to approx. 52.7xCoarse and fine focusingBright ring illumination with 21 LEDs for incident light without shadowsTransmitted light for transparent slides, separately switchable and dimmable SONY IMX335 SENSOR:Camera with advanced Sony IMX335 image sensor, sensor size 1/2.8"enables a resolution of 5 megapixelsThe pixel size is 2.0µmDisplay resolution: 1024x600px SCOPE OF DELIVERY:Digital microscope with integrated zoom lens and screenBuilt-in LED illumination (incident light and transmitted light)Contrast disk and transmitted light diskInstruction manualUSB mouseDust coverMicro SD card (16 GB)Power supply EU 12V 2A

Powerful combination set for precise observations and sharp representations. This high-quality set combines the professional digital microscope DST-0745, the modern microscope camera MikroCam PRO HDMI Autofocus, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live displays.The Microscope in DetailThe BRESSER DST-0745 is a special microscope that operates with a C-Mount camera (not included).Thus, direct viewing on a screen is possible. Due to the vertically mounted optics, there is no image shift when focusing. This is especially advantageous for "focus stacking" shots.The zoom is continuously adjustable from 0.7x to 4.5x. A coarse and fine focus makes it easier to sharpen, especially at high magnifications.Due to the convenient and user-friendly operation, the digital microscope is particularly suitable for daily use in the workshop. Measurements, quality controls of surfaces, or checking components and raw materials become easy with the workshop microscope. Insects, plants, and rocks are also impressively displayed.The DST-0745 workshop microscope is not suitable for visual observation, as it is only a zoom lens. It is used in conjunction with a MikroCam C-Mount.It is designed for camera sensors of about 1/2".With the two flexible incident light lamps, the light can be optimally positioned.The transmitted light illumination helps in observing transparent objects. The brightness of both illuminations can be adjusted in five levels.The magnification of a USB camera differs from the lens magnification. Therefore, a total magnification of the digital system cannot be specified. It depends on the sensor size and the display on a monitor.Compatible MikroCam cameras:5914122 MikroCam SF Full HD5914321 MikroCam SP 3.1 MP5914520 MikroCam SP 5.0 MP5914522 MikroCam SF 5.0 MP5914822 MikroCam SF UHD5914912 MikroCamII 12MP USB 3.05914170 MikroCam MINI Full HD HDMI5914185 MikroCam PRO HDMI 5MP5914190 MikroCam Pro HDMI AutofocusFEATURES OF THE MICROSCOPEDesigned for C-Mount microscope camerasUp to 1/2" sensor size is suitableMax. object height: 190 mmContinuously adjustable zoom (0.7x - 4.5x)Two flexible incident light LED lampsLED transmitted light illuminationAdjustable brightnessSCOPE OF DELIVERY OF THE MICROSCOPEZoom lens head 0.7x - 4.5xStand with incident and transmitted light illuminationGlass object plate (one side frosted)Plastic object plate (one side white, one side black)Power supply, user manual, dust coverThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality while being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera and provides brilliant and high-contrast images. Due to its very high light sensitivity, good image quality is ensured even in low light. Thus, this model is especially recommended for dark field or phase contrast.The autofocus allows optimal focusing of the camera without using the focusing wheels of the microscope. This ensures parfocality on various trinocular microscopes. The focusable range extends from the 0 position, which corresponds to the C-Mount distance, over a maximum focus of 5.4 mm forward, thus also reaching the CS-Mount distance and additionally up to 10.6 mm inward to cover an even larger area. In addition to autofocus, the camera can also be manually focused using a mouse. A focus adjustment to a specific area is also possible.The operation of the camera functions is done via mouse directly on the screen menu. Measurements can be performed via the screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully-fledged digital measuring microscope.The MikroCam PRO HDMI Autofocus offers a variety of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine visionThus, the MikroCam PRO Autofocus is excellent as an industrial camera with a very good price-performance ratio.Additionally, the camera can also provide the microscope view in a wireless network via WiFi module. If the camera is connected via HDMI, images and videos can be recorded directly on an SD card (not included). However, a connection to the PC via USB is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI model 5914180.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via screen menu (*Object micrometer Art. No. 5916720 for calibration necessary)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-Mount distance) to 10.6 mm1/4" tripod thread, e.g. for a photo tripodC-Mount thread: for easy adaptability, also suitable for C-Mount lensesSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY OF THE MICROSCOPE CAMERACamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image processing software (for Windows)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be directly mounted on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. Thus, observation can be done independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! Thus, several people can also view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The display via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

Powerful combo set for precise observations and razor-sharp images. This high-quality set combines the professional EDT-201 stereo microscope, the modern MikroCam PRO HDMI Autofocus microscope camera, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live presentations.The Microscope in DetailThe BRESSER Science ETD-201 is an optically high-quality incident and transmitted light stereo microscope. It is suitable for use in medicine, agriculture and forestry, forensics, scientific research institutes and schools, as well as for assembly and inspection of small components in precision mechanics and electronics. The particularly wide base with object table and the exceptionally large height adjustment range allow the observation of larger objects. The instrument features LED incident and transmitted light illumination, which can be used individually or combined and each continuously dimmed. The incident light angle is particularly user-friendly adjustable and lockable. With interchangeable widefield eyepieces (WF10x) and a 6.25x stereo zoom objective (0.8x-5x), a continuous magnification range of 8x to 50x is realised. The click-stop zoom locks at predefined positions, so magnifications can be exactly reproduced, for example, for measurements under the microscope. The eyepieces have a field number of 22, allowing a visible field of view between 4.5 and 27.5 mm. The eye distance and dioptre adjustment are individually adjustable. The trinocular microscope head can be rotated 360° and features two eyepiece tubes inclined at 45° as well as a separate, parfocally adjustable camera tube for connecting a C-Mount camera,  or MikroCam, up to a 1/2" sensor size. MICROSCOPE SCOPE OF DELIVERYMicroscope zoom headMicroscope standWF 10x eyepieces (2 pieces)C-Mount camera adapterUSB power supply cableGlass object platePlastic object plate (black/white)Dust coverOperating instructionsThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality combined with user-friendly operation. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or television. An optional 11'' HDMI monitor (Art. No. 5914110) can be mounted directly on the camera and provides brilliant and high-contrast images. Due to its very high light sensitivity, good image quality is ensured even in low light. This model is especially recommended for darkfield or phase contrast. The autofocus allows optimal focusing of the camera without using the microscope's focus wheels. This ensures parfocality on various trinocular microscopes. The focussable range extends from position 0, which corresponds to the C-Mount distance, over a focus of max. 5.4 mm forward, thus also reaching the CS-Mount distance, and additionally up to 10.6 mm inward to cover an even larger range. Besides autofocus, the camera can also be manually focused via mouse. Focus adjustment to a specific area is also possible. The camera functions are operated via mouse directly on the on-screen menu. Measurements can be performed via the on-screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully functional digital measuring microscope. The MikroCam PRO HDMI Autofocus offers a wide range of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine vision This makes the MikroCam PRO Autofocus an excellent industrial camera with a very good price-performance ratio. Additionally, the camera can provide the microscope view in a wireless network via a WiFi module. When connected via HDMI, images and videos can be recorded directly on an SD card (not included). A USB connection to a PC is not provided for this model. For this, we recommend the MikroCam Pro HDMI 5914180 model. MICROSCOPE CAMERA FEATURESHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via on-screen menu (*object micrometer Art. No. 5916720 required for calibration)Wide dynamic range function (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-Mount distance) to 10.6 mm1/4" tripod thread, e.g. for a photo tripodC-Mount thread: for easy adaptability, also suitable for C-Mount objectives SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0 MICROSCOPE CAMERA SCOPE OF DELIVERYCamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image processing software (for Windows)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMI The display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the camera's output image. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC. The size of the display is optimally chosen so that the microscope user can microscope as usual and simultaneously view the image on the monitor. The display provides optimal image quality with a wide viewing angle of 178°! This allows several people to view the image without loss of quality. The microscope camera image is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. Displaying via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when working under microscopic control. Many users also benefit from improved ergonomics when viewing the image on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here. The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included to avoid cable clutter at the workplace. Mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included. DISPLAY FEATURES 16:9 Full HD monitor with a resolution of 1920 x 1080 pixels Active area: 16.5 x 29.4 cm Easy mounting directly on a MikroCam PRO or MINI Wide viewing angle (178°) No separate power supply necessary SCOPE OF DELIVERY 13.3" display HDMI cable Y-cable for power supply via camera power supply Mounting screws (2 pieces) Allen key Operating instructions