BRESSER Stereo Microscope Advance ICD 10x-160x Zoom with MikroCamII 12MP USB 3.0 Microscope Camera

The zoom stereo microscope BRESSER Advance ICD is suitable for a wide variety of objects. Because of the Greenough design with two tilted objectives, you can view the sample in 3D. The three-dimensional view is also very helpful when working under the microscope, e.g. when soldering, dissecting or preparing a sample.The precise zoom enables you to view your sample in a wide range of magnifications from 1x to 4x (zoom ratio 4.0). When zooming, only slight refocussing is necessary. To do this, the Advance ICD microscope is equipped with a very precise, coaxial coarse and fine focus. The fine focus is especially helpful when using high magnifications or for imaging. When doing focus stacking with our MikroCam cameras (optional) the fine focus is also a big help.The interpupillary distance of the eyepiece pair is adjustable. Both eyepiece holders are equipped with diopter adjustment, which allows users with bad eyesight to compensate up to 8 dpt. difference between left and right eye. The 10x wide field eyepieces have field number (FN) 22 and are equipped with soft rubber eyecups. The microscope head can be moved on the long rod of the stand, which allows you to observe big samples up to a size of 22 cm.The angle of the bright LED reflected light illumination can be adjusted as necessary. The extra bright and even LED transmitted light provides a flat background when viewing transparent samples. The switch allows you to select reflected light, transmitted light or a combination of both to match your requirements. Brightness is adjustable with the dimmer. The bright light does not heat up, which allows you to observe also living specimens over a longer period of time. The long lasting LED is powered by a 5V AC adapter (EU/UK). The power cable comes with a USB plug.Fully equipped, the Advance ICD covers an exceptionally wide range of magnifications and is therefore suitable for a variety of tasks. Besides the included 2x lens there is also a selection of other auxiliary objectives available. With these, you are able to adjust magnification, working distance and depth of focus according to your needs.Magnifications in basic setting (no optional accessories):10x eyepieces: 10x – 40x10x eyepieces plus 2x auxiliary lens: 20x – 80x20x eyepieces: 20x – 80x20x eyepieces plus 2x auxiliary lens: 80x – 160x(other magnifications are possible when using other auxiliary lenses and/or eyepieces)The third tube is designed to permanently attach a camera. The image of the left eyepiece is diverted to the camera port with a lever/switch. We supply a selection of camera adapters for DSLR, mirrorless cameras and c-mount microscope cameras. This enables you to attach virtually any camera body as long as you have a model with interchangeable lens.APPLICATION RANGEQuality control in industryMaterials scienceLaboratoryBotany, gardening, farmingHydrology, aquaculture, fishkeepingInsects, Entomology, pest controlPlant physiology, raw food materials, medicinal herbsSchools, teachingFEATURESTrinocular head with 2 eyepieces and camera port with switchCompatible with BRESSER MikroCam cameras and others1x-4x stereo-zoom head2x auxiliary lensDiopter adjustment on both eyepiece holdersAdjustable interpupillary distance (52 – 72 mm)Bright LED light (reflected / transmitted)2 different object plates for best contrastView samples of up to 22 cm heightAC adapter Euro/UK (5V / 1000 mA) with USBHeavy build with metal standIncludes 2 pairs of widefield eyepiecesSCOPE OF DELIVERYMicroscope2 pairs of eyepieces (WF 10x / WF 20x)2x auxiliar lens (1 pcs)1 pair of rubber eyecupsObject plate 94 mm (black / white)Glass object plate 94 mm (matte)AC adapter Euro/UK (5V / 1000 mA)Dust coverPrinted manual

Professional complete set for precise analyses and high-resolution image transmission: This powerful set combines the high-quality Science ETD-201 stereo microscope with the modern MikroCamII 12MP camera. It is ideal for fine detail observations, sharp live images, and reliable documentation of your results.The Microscope in DetailThe BRESSER Science ETD-201 is an optically high-quality reflected and transmitted light stereo microscope. It is suitable for use in medicine, agriculture and forestry, forensics, scientific research institutes and schools as well as for assembly and inspection of small components in precision mechanics and electronics. The particularly wide base with object table and the exceptionally large height adjustment range allow the observation of larger objects. The instrument features LED reflected and transmitted illumination, which can be used individually or combined and each dimmed steplessly. The reflected light incidence angle is particularly user-friendly adjustable and lockable. With interchangeable widefield eyepieces (WF10x) and a 6.25x stereo zoom objective (0.8x-5x), a continuous magnification range of 8x to 50x is realised. The click-stop zoom locks at predefined positions, so that magnifications can be exactly reproduced, e.g. for measurements on the microscope. The eyepieces have a field number of 22, allowing a visible field of view between 4.5 and 27.5 mm. The eye distance and dioptre adjustment are individually adjustable. The trinocular microscope head can be rotated 360° and has two eyepiece tubes inclined at 45° as well as a separate, parfocally adjustable camera tube for connecting a C-Mount camera, or MikroCam, up to a 1/2" sensor size. MICROSCOPE SCOPE OF DELIVERYMicroscope zoom headMicroscope standWF 10x eyepieces (2 pieces)C-Mount camera adapterUSB power supply cableGlass object platePlastic object plate (black/white)Dust coverOperating instructionsThe Microscope Camera in DetailThe BRESSER MikroCam II cameras enable easy capturing of photos and videos with a microscope. The modern Sony® CMOS sensors deliver brilliant colours with overall very low image noise and are therefore the perfect solution for applications where natural colour reproduction is important. The included capture software offers numerous settings for capturing single images and videos. An integrated measurement function* allows measurement already in the live image. The included software supports the following languages: German, English, French, Polish, Turkish, Chinese. The housing features a C-Mount connection thread. For use on devices with 23.2mm mount, an optional variable reduction optic 0.5x (Art. No. 5914005) is available. For special applications, the camera can also be mounted on the integrated 1/4'' tripod thread. Compared to the MikroCam SP, the BRESSER MikroCamII is equipped with a USB 3.0 connection. This allows up to 8 times higher data rates than USB 2.0 connections. The cameras are thus capable of transmitting more than 25 frames per second (depending on resolution, exposure time and computer performance). This is especially important for living microorganisms. The camera is exceptionally light-sensitive, allowing short exposure times even at high magnifications or demanding contrast methods. MICROSCOPE CAMERA FEATURESHigh-quality metal housingMany software functions, such as measurement, focus stacking (overlaying multiple shots for increased depth of field), mosaic (to display larger image fields)Image and video recording, including time-lapse functionGood compatibility with various microscopesHigh-speed USB 3.0 connectionModern Sony® IMX226 sensor 7.53mm x 5.64mm (1/1.7'') SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 3.0, 3.1 MICROSCOPE CAMERA SCOPE OF DELIVERYCamera headUSB 3.0 cable23.2 mm adapter, 30 mm and 30.5 mmCapture and image processing software (for Windows)

The New BRESSER Science Infinity is the new top of the range of the biology microscope series by BRESSER. It is based on infinitely corrected planachromatic objective lenses with superb image quality. Because of the modern design and optics the installation of accessories is very simple and one has many options. The WF 10x eyepieces offer a large visual field of 22mm and are also suitable for spectacle wearers. For protection purposes the eyepieces are rubber coated. The interpupillary distance can be adjusted from ca. 55mm to 75mm. Dioptre adjustments are possible with both eyepieces.The bright and durable LED illumination is dimmable and also very practical for darkfield microscopy*.The Full Köhler illumination is adjustable with the built-in luminous-field diaphragm and the vertically and horizontally adjustable Abbe condenser (numerical aperture 1.25, with iris diaphragm). An imprint of the different possible magnifications on the condenser makes the adjustment of the iris diaphragm very fast and precise.Coaxial pinions drive the stage and focus which enables ergonomic operation of the microscope.The trinocular tube enables the direct attachment of a c-mount camera or MikroCam.SCOPE OF DELIVERYMicroscope with integrated LED illuminationplanachromatic objectives, infinity corrected (4x, 10x, 40x, 100x oil)2x eyepieces (WF 10x)Mains adapterManualImmersion oilDust cover*only with optional accessories

High-quality complete set for precise analyses and sharp image transmission: This powerful set combines the Advance ICD stereo microscope with the advanced MikroCam Mini HDMI, as well as a 0.5x reduction lens. It is ideally suited for detailed observations and documenting work results.The microscope in detailThe BRESSER Advance ICD is suitable as a zoom stereo loupe for a wide range of observations. Objects appear three-dimensional and lifelike through the Greenough design with two inclined objectives. The 3D image also makes working with tools (e.g. preparing, dissecting, soldering) much easier.The zoom allows stepless adjustment of magnification with a zoom factor of 4.0 (1x-4x). Only minimal refocusing is needed when zooming. For this, the Advance ICD has a coaxial focus drive with coarse and fine adjustment. This allows particularly sensitive focusing, especially at high magnifications or for photography. The fine focus is also a great aid for focus stacking, e.g. with our MikroCam cameras (optional).The interpupillary distance is individually adjustable. Both eyepiece holders have a dioptre adjustment, allowing differences in visual acuity of up to approx. 8 dpt between the left and right eye to be compensated. The 10x widefield eyepieces with a field number of 22 are equipped with removable rubber eyecups. The microscope head can be adjusted very far in height on the stand rod. This allows very large objects up to an object height of approx. 22 cm to be observed.The bright LED incident light illumination is adjustable in its tilt. The particularly even and bright LED transmitted light illumination provides a homogeneous background for transmitted light specimens. The illumination can be set with a toggle switch, so incident and transmitted light can be used separately or together depending on the type of sample. You can conveniently control the brightness with the dimmer. The bright LED illumination produces no heat, so living samples can be safely observed over a longer period. A low-power 5V power adapter (with Euro and UK adapter) is used to power the long-lasting LED illumination. The power cable has a USB connector on one side.The Advance ICD can be used in many ways due to the large magnification range. In addition to the included 2x auxiliary lens, further additional objectives are available, allowing you to vary and adapt the magnification range, working distance and depth of field even further to your requirements.These magnifications are possible in the basic configuration:10x eyepieces: 10x - 40x10x eyepieces plus 2x auxiliary lens: 20x - 80x20x eyepieces: 20x - 80x20x eyepieces plus 2x auxiliary lens: 80x - 160x(further magnifications possible with optional additional objectives or eyepiece magnifications)The third tube is designed for connecting a camera. A switch deflects the image from the left objective to the camera tube. Various adapters and reduction optics are available for C-mount cameras and DSLR or system cameras, so practically all cameras with removable lenses can be connected.APPLICATION AREASQuality control in industryMaterial testingLaboratoryBotany, horticulture, agricultureHydrology, aquaculture, aquaristics, marine biologyInsects, entomology, pest controlPlant physiology, raw materials, medicinal drugsSchool, teachingMICROSCOPE FEATURESTrinocular microscope head for visual observation and camera use with switchCompatible, among others, with BRESSER MikroCams (optional)1x-4x stereo zoom objective2x auxiliary lens (doubles magnification through eyepieces and zoom objective)Dioptre compensation in both eyepiece holdersAdjustable interpupillary distance (52 - 72 mm)Bright LED illumination (incident/transmitted light)2 different object plates for optimal contrast to the objectObservation of three-dimensional objects up to approx. 22 cm height possiblePower adapter Euro/UK (5V / 1,000 mA) with USB connectionRobust design with heavy base2 pairs of widefield eyepieces includedMICROSCOPE SCOPE OF DELIVERYMicroscope2 pairs of widefield eyepieces (WF 10x / WF 20x)2x auxiliary lens (1 piece)1 pair of rubber eyecupsPlastic object plate 94 mm (black/white)Glass object plate 94 mm (matte)Power adapter Euro/UK (5V / 1,000 mA)Dust coverOperating instructionsThe microscope camera in detailThe MikroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required to operate the camera; you can simply connect the MikroCam MINI Full HD HDMI to an existing monitor, TV, projector or smartboard. This makes it ideal for use in teaching. Alternatively, a small BRESSER monitor can also be mounted directly on the camera (see item no. 5914120).The HDMI connection is easy to make and the camera is ready for use immediately. No software installation, PC setup etc. is necessary. Thanks to the lossless data transmission, very good image quality is achieved and the image always has a consistently high frame rate of 60 fps and is delay-free. This is particularly advantageous when a microscope workstation is to be digitised, e.g. in quality control or production.The supplied USB mouse is connected for control. This allows the three menus (camera settings, measurement* and display) to be controlled.*To perform measurements with the camera, a calibration slide is required (e.g. item no.: 5916710 or 5916720).The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and mouse pointer are then not visible.Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for this. The USB port is only for controlling the camera with the mouse.MICROSCOPE CAMERA FEATURESHDMI connection for direct connection to a monitor, TV, projector or smartboardC-mount thread for easy adaptability to various microscopes (manufacturer-independent)Compatible with USB sticks or SD card readers (max. storage size: 512 GB)No PC/laptop necessaryMICROSCOPE CAMERA SCOPE OF DELIVERYMikroCam MINI Full HD HDMI with C-mount connectionPower supply (12 V / 2A)USB mouseHDMI cable (approx. 1.5 m)

In the microscope's basis, there are a transmitted light LED illuminator (3 W) as well as the power supply and the continuous adjustable dimmer for transmitted light. The trinocular head allows to mount a SLR camera or a USB microscope camera with an optional adapter. The inclination of the eyepiece tubes is 30°. The fluorescence attachment includes a special LED wheel with four different lamps (green, blue, violett, ultraviolett), a filter wheel and a radiation shield. The LED lamps produces the exciting radiation in order to get fluorescence. Fluorescence microscopy is done e. g. in biology, medicine, microchemistry, geology, semiconductor production and environmental protection. The Science ADL 601F LED is an instrument with an excellent value for money. It has also the other features, which are typical for high-quality microscopes: fourfold objective nosepiece, lengthwise and cross moveable stage, coaxial focusing knobs (concerning fine drive: 200 µm / full turn), adjustment of eye relief, diopter adjustment and the phototube. Optional available, general accessories are the wide field eyepieces (WF10x, WF15x), the dividing eyepiece (WF10x), and dark field condensers (dry and oil). FEATURESType: biology MicroscopeView: TrinocularApplication range: Biology, Gemology, Botany, Education, Teaching, Entomology, Forensic, Research, Laboratory, Medical science, Pathology, Veterinary medicineIllumination:  LEDLevel: Intermediate, ExpertWarranty: 2 years1.25 Abbe-condenser with iris diaphragm and filter holderIncl. adjustable mechanical stage Integr. dimmerAdjustable eye reliefDiopter adjustment SCOPE OF DELIVERYMicroscope4 DIN-objectives (PL 4x, PL 10x, PL 100x oil, PL-FL 40x)2x 10x eyepieces 1.25 Abbe-condenser with iris diaphragm and filter holderFluorescence attachment with LED wheel (green, blue, violett, ultraviolett) and respective emission filtersImmersion oilFull Koehler illumination for transmitted light

Powerful combo set for precise observations and sharp images. This high-quality set combines the professional Advance ICD stereo microscope, the modern MikroCam Mini HDMI microscope camera, a 0.5x reduction lens, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live presentations.The Microscope in DetailThe BRESSER Advance ICD is suitable as a zoom stereo loupe for a wide range of observations. Objects appear three-dimensional and lifelike through the Greenough design with two inclined objectives. The 3D image also makes working with tools (e.g. preparing, dissecting, soldering) much easier.The zoom allows stepless adjustment of magnification with a zoom factor of 4.0 (1x-4x). Only minimal refocusing is needed when zooming. For this, the Advance ICD has a coaxial focusing drive with coarse and fine adjustment. This allows particularly sensitive focusing at high magnifications or for photography. The fine focus is also a great aid for focus stacking, e.g. with our MikroCam cameras (optional).The interpupillary distance is individually adjustable. Both eyepiece holders have a dioptre adjustment, allowing differences in visual acuity of up to approx. 8 dpt between the left and right eye to be compensated. The 10x widefield eyepieces with a field number of 22 are equipped with removable rubber eyecups. The microscope head can be adjusted very far up and down on the stand rod. This allows very large objects up to approx. 22 cm in height to be observed.The bright LED incident illumination is tilt-adjustable. The particularly even and bright LED transmitted illumination provides a homogeneous background for transmitted light specimens. The illumination can be switched so that incident and transmitted light can be used separately or together depending on the sample type. Brightness is conveniently controlled with the dimmer. The bright LED illumination produces no heat, so living samples can be safely observed for extended periods. A low-power 5V power adapter (with Euro and UK adapters) is used to power the long-lasting LED illumination. The power cable has a USB connector on one side.The Advance ICD can be used in many ways due to its large magnification range. In addition to the included 2x auxiliary lens, further additional objectives are available, allowing you to vary and adapt the magnification range, working distance, and depth of field even further to your requirements.The following magnifications are possible in the basic configuration:10x eyepieces: 10x - 40x10x eyepieces plus 2x auxiliary lens: 20x - 80x20x eyepieces: 20x - 80x20x eyepieces plus 2x auxiliary lens: 80x - 160x(further magnifications possible with optional additional objectives or eyepiece magnifications)The third tube is designed for connecting a camera. A switch diverts the image from the left objective to the camera tube. Various adapters and reduction optics are available for C-mount cameras and DSLR or system cameras, so practically all cameras with removable lenses can be connected.APPLICATION AREASQuality control in industryMaterial testingLaboratoryBotany, horticulture, agricultureHydrology, aquaculture, aquaristics, marine biologyInsects, entomology, pest controlPlant physiology, raw materials, medicinal drugsSchool, teachingMICROSCOPE FEATURESTrinocular microscope head for visual observation and camera use with switchCompatible with e.g. BRESSER MikroCams (optional)1x-4x stereo zoom objective2x auxiliary lens (doubles magnification through eyepieces and zoom objective)Dioptre compensation in both eyepiece holdersAdjustable interpupillary distance (52 - 72 mm)Bright LED illumination (incident/transmitted light)2 different object plates for optimal contrast to the objectObservation of three-dimensional objects up to approx. 22 cm height possiblePower adapter Euro/UK (5V / 1,000 mA) with USB connectorRobust design with heavy base2 pairs of widefield eyepieces includedMICROSCOPE SCOPE OF DELIVERYMicroscope2 pairs of widefield eyepieces (WF 10x / WF 20x)2x auxiliary lens (1 piece)1 pair of rubber eyecupsPlastic object plate 94 mm (black/white)Glass object plate 94 mm (matte)Power adapter Euro/UK (5V / 1,000 mA)Dust coverOperating instructionsThe Microscope Camera in DetailThe MikroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required to operate the camera; you can simply connect the MikroCam MINI Full HD HDMI to an existing monitor, TV, projector or smartboard. This makes it ideal for use in teaching. Alternatively, a small BRESSER monitor can be mounted directly on the camera (see item no. 5914120).The HDMI connection is easy to make and the camera is ready to use immediately. No software installation or PC setup is necessary. The lossless data transmission achieves very good image quality and the image is always displayed with a consistently high frame rate of 60 fps and without delay. This is especially advantageous when digitising a microscope workstation, e.g. in quality control or production.The supplied USB mouse is connected for control. This allows the three menus (camera settings, measurement* and display) to be controlled.*To perform measurements with the camera, a calibration slide is required (e.g. item no.: 5916710 or 5916720).The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and mouse pointer are then not visible.Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for this. The USB port is only for controlling the camera with the mouse.MICROSCOPE CAMERA FEATURESHDMI connection for direct connection to a monitor, TV, projector or smartboardC-mount thread for easy adaptability to various microscopes (manufacturer-independent)Compatible with USB sticks or SD card readers (max. storage size: 512 GB)No PC/laptop necessaryMICROSCOPE CAMERA SCOPE OF DELIVERYMikroCam MINI Full HD HDMI with C-mount connectionPower supply (12 V / 2A)USB mouseHDMI cable (approx. 1.5 m)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the camera's output image. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and simultaneously view the image on the monitor. The display delivers optimal image quality with a wide viewing angle of 178°! This allows several people to view the image without loss of quality.The image from the microscope camera is always displayed on the HDMI screen without delay and with a high refresh rate of 60 FPS. Displaying via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from improved ergonomics when viewing the image on the HDMI display. Especially higher magnifications with their high numerical aperture are unpleasant for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable short, angled HDMI cable is also included, so cable clutter at the workstation is avoided.The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included.DISPLAY FEATURES16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINIWide viewing angle (178°)No separate power supply necessarySCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Allen keyOperating instructions

The Researcher Trino offers observing fun for an unbeatable price. Based on a solid metal body and equipped with DIN eyepieces and objectives, this transmission-type microscope fulfils even professional demands with its optical and mechanical quality. Many details, for example the cross table for optimal object positioning or the focuser with coarse and fine drive for dead-sharp images. Instead of a binocular head, the Trino Researcher has a trinocular head. With this equipment, the observer can make binocular obseravtions and - at the same time! - take photographs or use a PC eyepiece Features Type: Biological microscope View: Trinocular Application range: Biology, Education, Teaching, Imaging Solutions, Botany Illumination: LED with dimmer Level: Intermediate, Expert Warranty: 2 years Double-lens condensor with iris diaphragm Incl. mechanical stage Adjustable eye relief Specifications Comfortable binocular view, 360° turnable head Magnifications: 1000x, 400x, 100x, 40x Illumination: LED Eyepieces: 10x Eyepiece diameter: 23.2 mm Objectives: 4x, 10x, 40x, 100x (oil immersion) Power supply: 220/240V Included Accessories 4 DIN-objectives 2 eyepieces Mechanical stage Condensor Trinocular head