BRESSER Stereo Microscope Advance ICD 10x-160x Zoom with MikroCamII 20 MP 1'' Microscope Camera

High-quality complete set for precise analyses and sharp image transmission: This powerful set combines the Advance ICD stereo microscope with the advanced MikroCam PRO HDMI autofocus, as well as a 0.5x reduction lens. It is ideally suited for detailed observations and documenting work results.The microscope in detailThe BRESSER Advance ICD is suitable as a zoom stereo loupe for a wide range of observations. Objects appear three-dimensional and plastic due to the Greenough design with two inclined objectives. The 3D image also makes working with tools (e.g. preparing, dissecting, soldering) much easier.The zoom allows stepless adjustment of magnification with a zoom factor of 4.0 (1x-4x). Only minimal refocusing is required when zooming. For this, the Advance ICD has a coaxial focus drive with coarse and fine adjustment. This allows particularly sensitive focusing, especially at high magnifications or for photography. The fine focus is also a great aid for focus stacking, e.g. with our MikroCam cameras (optional).The eye distance is individually adjustable. Both eyepiece holders have a dioptre adjustment, allowing differences in visual acuity of up to approx. 8 dpt between the left and right eye to be compensated. The 10x widefield eyepieces with a field number of 22 are equipped with removable rubber eyecups. The microscope head can be adjusted very far in height on the stand rod. This allows very large objects up to an object height of approx. 22 cm to be observed.The bright LED incident light illumination is adjustable in its tilt. The particularly even and bright LED transmitted light illumination provides a homogeneous background for transmitted light specimens. The illumination can be set with a toggle switch, so incident and transmitted light can be used separately or together depending on the type of sample. You can conveniently control the brightness with the dimmer. The bright LED illumination produces no heat, so living samples can be safely observed over a longer period. A low-power 5V power adapter (with Euro and UK adapter) is used to power the long-lasting LED illumination. The power cable has a USB connector on one side.The Advance ICD can be used in many ways due to the large magnification range. In addition to the included 2x auxiliary lens, further additional objectives are available, allowing you to vary and adapt the magnification range, working distance and depth of field even further to your requirements. These magnifications are possible in the basic configuration:10x eyepieces: 10x - 40x10x eyepieces plus 2x auxiliary lens: 20x - 80x20x eyepieces: 20x - 80x20x eyepieces plus 2x auxiliary lens: 80x - 160x(further magnifications possible with optional additional objectives or eyepiece magnifications)The third tube is designed for connecting a camera. A switch deflects the image from the left objective to the camera tube. Various adapters and reduction optics are available for C-mount cameras and DSLR or system cameras, so practically all cameras with removable lenses can be connected. APPLICATION AREASQuality control in industryMaterial testingLaboratoryBotany, horticulture, agricultureHydrology, aquaculture, aquaristics, marine biologyInsects, entomology, pest controlPlant physiology, raw materials, medicinal drugsSchool, teaching MICROSCOPE FEATURESTrinocular microscope head for visual observation and camera use with switchCompatible, among others, with BRESSER MikroCams (optional)1x-4x stereo zoom objective2x auxiliary lens (doubles magnification through eyepieces and zoom objective)Dioptre compensation in both eyepiece holdersAdjustable eye distance (52 - 72 mm)Bright LED illumination (incident/transmitted light)2 different object plates for optimal contrast to the objectObservation of three-dimensional objects up to approx. 22 cm height possiblePower adapter Euro/UK (5V / 1,000 mA) with USB connectionRobust design with heavy base2 pairs of widefield eyepieces includedMICROSCOPE SCOPE OF DELIVERYMicroscope2 pairs of widefield eyepieces (WF 10x / WF 20x)2x auxiliary lens (1 piece)1 pair of rubber eyecupsPlastic object plate 94 mm (black/white)Glass object plate 94 mm (matte)Power adapter Euro/UK (5V / 1,000 mA)Dust coverOperating instructionsThe microscope camera in detailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality combined with user-friendly operation. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or television. An optional 11'' HDMI monitor (Art. No. 5914110) can be mounted directly on the camera and provides brilliant and high-contrast images. Due to the very high light sensitivity, good image quality is ensured even in low light. This model is particularly recommended for darkfield or phase contrast. The autofocus allows optimal focusing of the camera without using the microscope's focus wheels. This ensures parfocality on various trinocular microscopes. The focusable range extends from position 0, which corresponds to the C-mount distance, over focusing up to 5.4 mm forward, which also reaches the CS-mount distance, and additionally up to 10.6 mm inward to cover an even larger range. Besides autofocus, the camera can also be manually focused via mouse. Focus adjustment to a specific area is also possible. The camera functions are operated via mouse directly on the on-screen menu. Measurements can be performed via the on-screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully functional digital measuring microscope. The MikroCam PRO HDMI Autofocus offers a wide range of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine vision This makes the MikroCam PRO Autofocus an excellent industrial camera with a very good price-performance ratio. Additionally, the camera can provide the microscope view in a wireless network via a WiFi module. When connected via HDMI, images and videos can be recorded directly on an SD card (not included). However, a USB connection to the PC is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI 5914180 model. MICROSCOPE CAMERA FEATURESHDMI connection for monitor or televisionBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via on-screen menu (*object micrometer Art. No. 5916720 required for calibration)Wide dynamic range function (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-mount distance) to 10.6 mm1/4" tripod thread e.g. for a photo tripodC-mount thread: for easy adaptability, also suitable for C-mount objectives SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0 MICROSCOPE CAMERA SCOPE OF DELIVERYCamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image processing software (for Windows)

Powerful combination set for precise observations and sharp representations. This high-quality set combines the professional digital microscope DST-0745, the modern microscope camera MikroCam PRO HDMI 5MP, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live displays.The microscope in detailThe BRESSER DST-0745 is a special microscope that operates with a C-Mount camera (not included).Thus, direct viewing on a screen is possible. Due to the vertically mounted optics, there is no image shift when focusing. This is especially advantageous for "focus stacking" shots.The zoom is continuously adjustable from 0.7x to 4.5x. A coarse and fine focus makes focusing easier, especially at high magnifications.Due to the convenient and user-friendly operation, the digital microscope is particularly suitable for daily use in the workshop. Measurements, quality controls of surfaces, or checking components and raw materials become easy with the workshop microscope. Insects, plants, and rocks are also impressively displayed.The DST-0745 workshop microscope is not suitable for visual observation, as it is only a zoom lens. It is used in conjunction with a MikroCam C-Mount.It is designed for camera sensors of about 1/2".With the two flexible incident light lamps, the light can be optimally positioned.The transmitted light illumination helps in observing transparent objects. The brightness of both illuminations can be adjusted in five levels.The magnification of a USB camera differs from the objective magnification. Therefore, a total magnification of the digital system cannot be specified. It depends on the sensor size and the display on a monitor.Compatible MikroCam cameras:5914122 MikroCam SF Full HD5914321 MikroCam SP 3.1 MP5914520 MikroCam SP 5.0 MP5914522 MikroCam SF 5.0 MP5914822 MikroCam SF UHD5914912 MikroCamII 12MP USB 3.05914170 MikroCam MINI Full HD HDMI5914185 MikroCam PRO HDMI 5MP5914190 MikroCam Pro HDMI AutofocusFEATURES OF THE MICROSCOPEDesigned for C-Mount microscope camerasUp to 1/2" sensor size is suitableMax. object height: 190 mmContinuously adjustable zoom (0.7x - 4.5x)Two flexible incident light LED lampsLED transmitted light illuminationAdjustable brightnessSCOPE OF DELIVERY OF THE MICROSCOPEZoom objective head 0.7x - 4.5xStand with incident and transmitted light illuminationGlass object plate (one side frosted)Plastic object plate (one side white, one side black)Power supply, user manual, dust coverThe microscope camera in detailThe BRESSER MikroCam PRO HDMI 5MP impresses with its excellent image quality while also being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera and provides brilliant and high-contrast images.For high-resolution micro photos, this camera features a high-quality Sony 5MP sensor, allowing images and videos to be saved on an SD card with higher resolution than Full HD.The operation of the camera functions is done via mouse directly on the screen menu. Through the screen menu, measurements can also be performed, making your microscope with the MikroCam Pro HDMI 5MP a fully functional digital measuring microscope.Additionally, the camera can also provide the microscope view in a wireless network via WiFi module. However, a connection to the PC via USB is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI model 5914180.The professional software MikroCamLabII is still included, allowing images to be edited and evaluated later with the software.Software for image evaluation included in the following languages(no direct image capture via USB possible)GermanEnglishFrenchPolishTurkishIndonesianJapaneseSimplified ChineseTraditional ChineseThe software features numerous functions for image processingMeasurement function (additional object micrometer required, e.g., Bresser article no. 5916720): lengths, angles, areas (polygons, circles, ellipses)Image stacking from video filesFluorescence microscopy: data for numerous fluorophores are stored in the softwareBatch savingHDR (High Dynamic Range)FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via screen menu (object micrometer Art. No. 5916720 for calibration necessary)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY OF THE MICROSCOPE CAMERAMikroCam Pro HDMI 5MP with C-Mount threadPower supplyMouseHDMI cableWiFi moduleSoftware (CD-ROM)The display in detailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be directly mounted on the camera with an adjustable holder. The screen provides brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! Thus, several people can also view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The display via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems like floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so that cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done with two screws. Screws and tools are included.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

Professional complete set for precise analyses and high-resolution image results: This powerful set combines the high-quality Advance ICD stereo microscope with the modern MikroCamII 12 MP camera and a 0.5x reduction lens. It is ideal for fine detail observations and high-resolution images, ensuring reliable documentation of your results.The microscope in detailThe BRESSER Advance ICD is suitable as a zoom stereo loupe for various observations. Objects appear three-dimensional and plastic due to the Greenough design with two inclined objectives. The 3D image also makes working with tools (e.g. preparing, dissecting, soldering) much easier.The zoom allows stepless adjustment of magnification with a zoom factor of 4.0 (1x-4x). Only minimal refocusing is needed when zooming. For this, the Advance ICD has a coaxial focusing drive with coarse and fine adjustment. This allows particularly sensitive focusing at high magnifications or for photography. The fine focus is also a great aid for focus stacking, e.g. with our MikroCam cameras (optional).The interpupillary distance is individually adjustable. Both eyepiece holders have a dioptre adjustment, allowing differences in visual acuity of up to approx. 8 dpt between the left and right eye to be compensated. The 10x widefield eyepieces with a field number of 22 are equipped with removable rubber eyecups. The microscope head can be adjusted very far in height on the stand rod. This allows observation of very large objects up to an object height of approx. 22 cm.The bright LED incident illumination is adjustable in inclination. The particularly even and bright LED transmitted illumination provides a homogeneous background for transmitted light specimens. The illumination can be set with a toggle switch, so incident and transmitted light can be used separately or together depending on the type of sample. You can conveniently adjust the brightness with the dimmer. The bright LED illumination produces no heat, so living samples can be safely observed over a longer period. A low-power 5V power adapter (with Euro and UK adapter) is used to power the long-lasting LED illumination. The power cable has a USB connection on one side.The Advance ICD can be used in many ways due to the large magnification range. In addition to the included 2x auxiliary lens, further additional objectives are available, allowing you to vary and adapt the magnification range, working distance, and depth of field even further to your requirements. These magnifications are possible in the basic configuration:10x eyepieces: 10x - 40x10x eyepieces plus 2x auxiliary lens: 20x - 80x20x eyepieces: 20x - 80x20x eyepieces plus 2x auxiliary lens: 80x - 160x(further magnifications possible with optional additional objectives or eyepiece magnifications)The third tube is designed for connecting a camera. A switch diverts the image from the left objective to the camera tube. Various adapters and reduction optics are available for C-mount cameras and DSLR or system cameras, so practically all cameras with removable lenses can be connected. APPLICATION AREASQuality control in industryMaterial testingLaboratoryBotany, horticulture, agricultureHydrology, aquaculture, aquaristics, marine biologyInsects, entomology, pest controlPlant physiology, raw materials, medicinal drugsSchool, teaching MICROSCOPE FEATURESTrinocular microscope head for visual observation and camera use with switchCompatible, among others, with BRESSER MikroCams (optional)1x-4x stereo zoom objective2x auxiliary lens (doubles magnification through eyepieces and zoom objective)Dioptre compensation in both eyepiece holdersAdjustable interpupillary distance (52 - 72 mm)Bright LED illumination (incident/transmitted light)2 different object plates for optimal contrast to the objectObservation of three-dimensional objects up to approx. 22 cm height possiblePower adapter Euro/UK (5V / 1,000 mA) with USB connectionRobust design with heavy base2 pairs of widefield eyepieces includedMICROSCOPE SCOPE OF DELIVERYMicroscope2 pairs of widefield eyepieces (WF 10x / WF 20x)2x auxiliary lens (1 piece)1 pair of rubber eyecupsPlastic object plate 94 mm (black/white)Glass object plate 94 mm (matte)Power adapter Euro/UK (5V / 1,000 mA)Dust coverOperating instructionsThe microscope camera in detailThe BRESSER MikroCam II cameras enable easy photo and video recording with a microscope. The modern Sony® CMOS sensors deliver brilliant colours with overall very low image noise and are thus the perfect solution for applications where natural colour reproduction is important. The included recording software offers numerous settings for capturing single images and videos. An integrated measurement function* allows measurement already in the live image. The included software supports the following languages: German, English, French, Polish, Turkish, Chinese. The housing has a C-mount connection thread. For use on devices with 23.2 mm mount, an optional variable 0.5x reduction optic (Art. No. 5914005) is available. For special applications, the camera can also be mounted on the integrated 1/4'' tripod thread. The BRESSER MikroCamII are equipped with a USB 3.0 connection compared to the MikroCam SP. This allows up to 8x higher data rates than USB 2.0 connections. The cameras can thus transmit more than 25 frames per second (depending on resolution, exposure time, and computer performance). This is especially important for living microorganisms. The camera is exceptionally light-sensitive, so short exposure times can be used even at high magnifications or demanding contrast methods. MICROSCOPE CAMERA FEATURESHigh-quality metal housingMany software functions, such as measurement, focus stacking (overlaying multiple images for increased depth of field), mosaic (to display larger image fields)Image and video recording, including time-lapse functionGood compatibility with various microscopesHigh-speed USB 3.0 connectionModern Sony® IMX226 sensor 7.53 mm x 5.64 mm (1/1.7'') SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 3.0, 3.1 MICROSCOPE CAMERA SCOPE OF DELIVERYCamera headUSB 3.0 cable23.2 mm adapter, 30 mm and 30.5 mmRecording and image processing software (for Windows)

This high-quality combination set, consisting of the professional Science Infinity Microscope, the powerful MikroCam PRO HDMI Autofocus, and the matching 13.3" HDMI monitor, offers a complete solution for modern laboratory use and impressive presentations. It combines precise microscopy with crystal-clear live image transmission ideal for research, teaching, and demonstrations.The Microscope in DetailThe NEW BRESSER Science Infinity microscope is the new flagship model of Bresser's biological microscope series. It features infinity-corrected planachromatic objectives with excellent image quality. Thanks to the contemporary optical design, you have great flexibility when connecting accessories such as cameras.The WF 10x eyepieces have a large field of view of 22 mm and are also ideal for glasses wearers. For protection, the eyepieces are equipped with a rubberized surface. The interpupillary distance can be adjusted from approximately 55 mm to approximately 75 mm. A diopter adjustment is possible with both eyepieces.The strong and durable LED illumination is adjustable and is also very suitable for contrast methods*.The Köhler illumination is adjustable with the built-in aperture diaphragm and the height-adjustable and centering Abbe condenser (numerical aperture 1.25; with iris diaphragm). The condenser also features a printout of the various magnifications, allowing for quick and precise adjustment of the iris diaphragm.The coaxial drives of the stage adjustment and the coarse and fine focusing enable ergonomic working.The trinocular port allows for the direct connection of a C-Mount camera or MikroCam.SCOPE OF DELIVERY MICROSCOPEMicroscope stand with integrated LED illuminationPlanachromatic, infinity-corrected objectives (4x, 10x, 40x, 100x oil)Two WF 10x eyepiecesImmersion oilDust coverPower supplyUser manual*With optional accessoriesThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI Autofocus impresses with its excellent image quality while being user-friendly. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be directly mounted on the camera, providing brilliant and high-contrast images. Due to its very high light sensitivity, good image quality is ensured even in low light. This model is especially recommended for dark field or phase contrast.The autofocus allows for optimal focusing of the camera without using the microscope's focusing wheels. This ensures parfocality on various trinocular microscopes. The focusable range extends from the 0 position, corresponding to the C-Mount distance, through a maximum forward focus of 5.4 mm, thus also reaching the CS-Mount distance, and additionally up to 10.6 mm inward to cover an even larger range. Besides autofocus, the camera can also be manually focused using a mouse. Focus adjustment to a specific area is also possible.The operation of the camera functions is done via mouse directly on the on-screen menu. Measurements can be performed through the on-screen menu, turning your microscope with the MikroCam Pro HDMI Autofocus into a fully functional digital measuring microscope.The MikroCam PRO HDMI Autofocus offers a variety of applications, including:DocumentationEvaluationAnalysisPresentationQuality controlAutomationMachine visionThus, the MikroCam PRO Autofocus is excellently suited as an industrial camera with a very good price-performance ratio.Additionally, the camera can also provide the microscope view in a wireless network via a WiFi module. When connected via HDMI, images and videos can be recorded directly on an SD card (not included). However, a connection to a PC via USB is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI model 5914180.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via on-screen menu (*Object micrometer Art. No. 5916720 necessary for calibration)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GBLarge focus range: -5.4 mm to 0 (C-Mount distance) to 10.6 mm1/4" tripod thread, e.g., for a photo tripodC-Mount thread: for easy adaptability, also suitable for C-Mount objectivesSYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7, or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0SCOPE OF DELIVERY MICROSCOPE CAMERACamera headHDMI cableUSB mousePower supplyWiFi antennaRecording and image editing software (for Windows)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be directly mounted on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual while simultaneously viewing the image on the monitor. The display provides optimal image quality with a large viewing angle of 178°! Thus, multiple people can view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, preventing cable clutter at the workplace. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included in the delivery.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

Powerful combo set for precise observations and razor-sharp images. This high-quality set combines the professional ETD-201 stereo microscope, the modern MikroCam PRO HDMI 5MP microscope camera, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live presentations.The Microscope in DetailThe BRESSER Science ETD-201 is an optically high-quality reflected and transmitted light stereo magnifier. It is suitable for use in medicine, agriculture and forestry, forensics, scientific research institutes and schools, as well as for assembly and inspection of small components in precision mechanics and electronics. The particularly wide base with object table and the exceptionally large height adjustment range allow the observation of larger objects. The instrument features LED reflected and transmitted illumination, which can be used individually or combined and each continuously adjusted. The reflected light incidence angle is especially user-friendly adjustable and lockable. With interchangeable widefield eyepieces (WF10x) and a 6.25x stereo zoom objective (0.8x-5x), a continuous magnification range of 8x to 50x is realised. The click-stop zoom locks at predefined positions, so magnifications can be exactly reproduced, e.g., for measurements under the microscope. The eyepieces have a field number of 22, allowing a visible field of view between 4.5 and 27.5 mm. The eye distance and dioptre adjustment are individually adjustable. The trinocular microscope head can be rotated 360° and features two eyepiece tubes inclined at 45° as well as a separate, parfocally adjustable camera tube for connecting a C-Mount camera, or MikroCam, up to a 1/2" sensor size. MICROSCOPE SCOPE OF DELIVERYMicroscope zoom headMicroscope standWF 10x eyepieces (2 pieces)C-Mount camera adapterUSB power supply cableGlass object platePlastic object plate (black/white)Dust coverOperating instructionsThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI 5MP impresses with its excellent image quality combined with user-friendly operation. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or TV. An optional 11'' HDMI monitor (Art. No. 5914110) can be mounted directly on the camera and provides brilliant and high-contrast images. For high-resolution microphotos, this camera features a high-quality Sony 5MP sensor, so images and videos can be saved on an SD card at resolutions higher than Full HD. The camera functions are operated via mouse directly on the on-screen menu. Measurements can now also be performed via the on-screen menu, turning your microscope with the MikroCam Pro HDMI 5MP into a fully functional digital measuring microscope. Additionally, the camera can provide the microscope view wirelessly via a WiFi module. However, connection to a PC via USB is no longer supported with this model. For this, we recommend the MikroCam Pro HDMI 5914180 model. The professional MikroCamLabII software is still included, allowing images to be edited and analysed afterwards. Image Analysis Software Included in the Following Languages(no direct image capture via USB possible)GermanEnglishFrenchPolishTurkishIndonesianJapaneseSimplified ChineseTraditional Chinese The software offers numerous image processing functionsMeasurement function (additional object micrometer required, e.g., Bresser article no. 5916720): distances, angles, areas (polygon, circles, ellipses)Image stacking from video filesFluorescence microscopy: data for numerous fluorophores are stored in the softwareBatch savingHDR (High Dynamic Range) MICROSCOPE CAMERA FEATURESHDMI connection for monitor or TVBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via on-screen menu (object micrometer Art. No. 5916720 required for calibration)Wide dynamic range function (WDR)Saving images and videos on SD card (not included) max. 32 GB SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0 MICROSCOPE CAMERA SCOPE OF DELIVERYMikroCam Pro HDMI 5MP with C-Mount threadPower supplyMouseHDMI cableWiFi moduleSoftware (CD-ROM)The Display in DetailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMI The display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artefacts, as the display has the same resolution as the camera's output image. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC. The display size is optimally chosen so that the microscope user can continue to use the microscope as usual and simultaneously view the image on the monitor. The display provides optimal image quality with a wide viewing angle of 178°! This allows several people to view the image without loss of quality. The microscope camera image is always displayed on the HDMI screen without delay and with a high refresh rate of 60 FPS. Display via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is especially advantageous when working under microscopic control. Many users also benefit from improved ergonomics when viewing the image on the HDMI display. Especially higher magnifications with their high numerical aperture can be uncomfortable for eye problems such as floaters (vitreous opacities). Digital viewing can provide relief here. The display can be powered with the included Y-cable using the same power supply as the camera. A suitable short, angled HDMI cable is also included, so cable clutter at the workplace is avoided. Mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included. DISPLAY FEATURES 16:9 Full HD monitor with a resolution of 1920 x 1080 pixels Active area: 16.5 x 29.4 cm Easy mounting directly on a MikroCam PRO or MINI Wide viewing angle (178°) No separate power supply required SCOPE OF DELIVERY 13.3" display HDMI cable Y-cable for power supply via camera power supply Mounting screws (2 pieces) Allen key Operating instructions

High-quality combo set for precise analyses and brilliant image display. This powerful set combines the professional Science ETD-301 stereo microscope with the modern MikroCam Mini HDMI camera and the appropriate adapter. The perfectly matched unit is ideal for precise observations, high-resolution live displays, and reliable visual documentation of your results.The Microscope in DetailThe BRESSER Science ETD-301 is a reflected and transmitted light stereo magnifier with high-quality optics. It is suitable for use in medicine, agriculture and forestry, criminology, scientific research institutes and schools, as well as for assembly and inspection of small components in precision mechanics and electronics. The particularly wide base with object table allows viewing of larger objects. The maximum object height is approx. 85 mm. The large working distance of 100 mm enables working with tools, e.g. for preparing or dissecting, measuring or testing. The instrument features LED reflected and transmitted illumination, which can be used individually or combined and each continuously adjustable. The reflected light incidence angle is particularly user-friendly adjustable. With interchangeable widefield eyepieces (WF10x) and a 9x stereo zoom objective (0.7x - 6.3x), a continuous magnification range of 7x to 63x is realised. The coarse and fine focusing allows precise sharpness adjustment, especially at high magnifications and for photography. The eye distance and dioptre adjustment are individually adjustable. The trinocular microscope head can be rotated 360° and has two eyepiece tubes inclined at 45°. The trinocular tube can carry a DSLR / system camera (APS-C or DX format) or a C-mount camera (sensor size up to 1'') using an optional adapter. A switch diverts the light path of one eyepiece to the camera. This provides 50% light, more than a microscope with a permanent beam splitter. To connect a DSLR / system camera, the adapter with item no. 5942100 and a camera-specific T2 ring are required. A C-mount camera is connected with the adapter item no. 5942101. MICROSCOPE FEATURESWF 10x eyepieces with 22 mm field of view (based on a 1x objective)Large, continuously adjustable 9x zoom (7x - 63x magnification)Suitable for DSLR / system cameras and C-mount cameras with optional adaptersStand with coarse and fine focusing MICROSCOPE SCOPE OF DELIVERYMicroscope zoom headMicroscope stand with power cableWF 10x eyepieces with 22 mm field of view (2 pieces)Translucent plastic object plateDust coverThe Microscope Camera in DetailThe MikroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required to operate the camera; you can simply connect the MikroCam MINI Full HD HDMI to an existing monitor, TV, projector or smartboard. This makes it ideal for use in teaching. Alternatively, a small BRESSER monitor can be mounted directly on the camera (see item no. 5914120). The HDMI connection is easy to make and the camera is ready for use immediately. No software installation, PC setup etc. is necessary. Thanks to lossless data transmission, very good image quality is achieved and the image always has a consistently high frame rate of 60 fps and is delay-free. This is particularly advantageous when a microscope workstation is to be digitised, e.g. in quality control or production. The supplied USB mouse is connected for control. This allows the three menus (camera settings, measurement* and display) to be controlled. *To perform measurements with the camera, a calibration slide is required (e.g. item no.: 5916710 or 5916720). The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and mouse pointer are then not visible. Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for this. The USB port is only for controlling the camera with the mouse. MICROSCOPE CAMERA FEATURES HDMI connection for direct connection to a monitor, TV, projector or smartboard C-mount thread for easy adaptability to various microscopes (manufacturer-independent) Compatible with USB sticks or SD card readers (max. storage size: 512 GB) No PC/laptop necessary MICROSCOPE CAMERA SCOPE OF DELIVERY MikroCam MINI Full HD HDMI with C-mount connection Power supply (12 V / 2A) USB mouse HDMI cable (approx. 1.5 m)

The BRESSER USB Digital Microscope DST-1028 5MP enables easy and convenient observation of your specimen on the computer with detailed images. The digital handheld microscope is especially suitable for examining material samples, circuit boards and electronic components, but also plants, insects and much more. In addition to applications in school and hobby, the digital microscope is also suitable for tasks in quality assurance. The device features high-quality optics with continuous zoom. This enables documentation of the specimen between 10x and 280x magnifications. Depending on the object to be examined, the appropriate magnification can always be selected. With its ring light, the digital incident light microscope ensures optimal illumination and high-contrast images of your specimen. The ring light consists of eight LEDs. The brightness can be conveniently controlled with the dimmer, which is integrated in the USB connection cable. The microscope has a stable, adaptable metal stand, which can be adjusted in height depending on the object height and magnification used. This makes it possible to examine both larger and very flat objects (e.g. printing documents). At low magnifications, the working distance is 110 mm, so that working with tools, e.g. for preparation, is possible underneath. FIELDS OF APPLICATIONQuality assuranceIndustryForensics (evidence material, authenticity testing)Scientific examinations (e.g. surfaces and structures)Jewellery collectibles and watchesPlants and plants diseases, pets e.g. in horticulture and agriculture FEATURESDigital USB incident light microscope with LED ring lightHigh-quality optics with continuous zoomGenerous working distance for larger objectsSolid metal construction Cable length: 1,2 mImage fields: 10x: 42 x 32 mm / 100x: 4,2 x 3,2 mm / 280x: 1,6 x 1,2 mmMax. object height: 10x – ca. 45 mm / 100x – ca. 160 mm / 280x – ca. 170 mm SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 2nd generation orAMD FX or Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYDigital microscope incl. software download (for Windows only)Integrated USB port with adjustment wheel for light intensitymetal stand with integrated focusingExtension for tripod