BRESSER Stereo Microscope Science ETD-301 7-63x Trinocular Zoom with MikroCam MINI Full HD HDMI Microscope Camera and Full HD MINI HDMI Display (13.3")

Powerful combination set for precise observations and sharp representations. This high-quality set combines the professional digital microscope DST-0745, the modern microscope camera MikroCam Mini HDMI, and a 13.3-inch HDMI monitor into a powerful unit for precise analyses, visual documentation, and live displays.The microscope in detailThe BRESSER DST-0745 is a special microscope that operates with a C-Mount camera (not included).Thus, direct viewing on a screen is possible. Due to the vertically mounted optics, there is no image shift when focusing. This is especially advantageous for "focus stacking" shots.The zoom is continuously adjustable from 0.7x to 4.5x. A coarse and fine focus makes focusing easier, especially at high magnifications.Due to the convenient and user-friendly operation, the digital microscope is particularly suitable for daily use in the workshop. Measurements, quality controls of surfaces, or checking components and raw materials become easy with the workshop microscope. Insects, plants, and rocks are also impressively displayed.The DST-0745 workshop microscope is not suitable for visual observation, as it is only a zoom lens. It is used in conjunction with a MikroCam C-Mount.It is designed for camera sensors of about 1/2".With the two flexible incident light lamps, the light can be optimally positioned.The transmitted light illumination helps in observing transparent objects. The brightness of both illuminations can be adjusted in five levels.The magnification of a USB camera differs from the lens magnification. Therefore, a total magnification of the digital system cannot be specified. It depends on the sensor size and the display on a monitor.Compatible MikroCam cameras:5914122 MikroCam SF Full HD5914321 MikroCam SP 3.1 MP5914520 MikroCam SP 5.0 MP5914522 MikroCam SF 5.0 MP5914822 MikroCam SF UHD5914912 MikroCamII 12MP USB 3.05914170 MikroCam MINI Full HD HDMI5914185 MikroCam PRO HDMI 5MP5914190 MikroCam Pro HDMI AutofocusFEATURES OF THE MICROSCOPEDesigned for C-Mount microscope camerasUp to 1/2" sensor size is suitableMax. object height: 190 mmContinuously adjustable zoom (0.7x - 4.5x)Two flexible incident light LED lampsLED transmitted light illuminationAdjustable brightnessSCOPE OF DELIVERY OF THE MICROSCOPEZoom objective head 0.7x - 4.5xStand with incident and transmitted light illuminationGlass object plate (one side frosted)Plastic object plate (one side white, one side black)Power supply, user manual, dust coverThe microscope camera in detailThe MikroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required to operate the camera; you can simply connect the MikroCam MINI Full HD HDMI to an existing monitor, TV, projector, or smartboard. This makes it ideal for use in education. Alternatively, a small monitor from BRESSER can also be mounted directly on the camera (see item no. 5914120).The HDMI connection is easy to make, and the camera is ready to use immediately. No software installation, PC setup, etc. is required. Through lossless data transmission, very good image quality is achieved, and the image is always displayed with a consistently high frame rate of 60 fps and without delay. This is particularly advantageous when a microscope workstation, for example, in quality control or production, needs to be digitized.To control the camera, the included USB mouse is connected. This allows you to control the three menus (camera settings, measurement*, and display).*To take measurements with the camera, a calibration specimen is required (e.g., item no.: 5916710 or 5916720).The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and the mouse pointer are then not visible.Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for that. The USB port is only for controlling the camera with the mouse.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for direct connection to a monitor, TV, projector, or smartboardC-Mount thread for easy adaptability to various microscopes (manufacturer-independent)Compatible with USB sticks or SD card readers (max. storage size: 512 GB)No PC/laptop necessarySCOPE OF DELIVERY OF THE MICROSCOPE CAMERAMikroCam MINI Full HD HDMI with C-Mount connectionPower supply (12 V / 2A)USB mouseHDMI cable (approx. 1.5 m)The display in detailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows observation independently of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual and view the image simultaneously on the monitor. The display provides optimal image quality with a large viewing angle of 178°! This allows multiple people to view the image without loss of quality.The image from the microscope camera is always displayed on the HDMI screen without delay and with a high refresh rate of 60 FPS. The display via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work under microscopic control is to be carried out.Many users also benefit from improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture are uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, so cable clutter at the workplace is avoided. The mounting on a MikroCam PRO or MINI is done with two screws. Screws and tools are included.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

The BRESSER Science ETD-301 is a stereo incident light and transmitted light microscope with high-quality optics.It is suitable for use in medicine, agriculture, forestry, forensics, scientific research institutes and schools as well as for the assembly and inspection of small components in precision mechanics and electronics.The particularly wide base with object table enables the viewing of larger objects. The maximum object height is approx. 85 mm. The large working distance of 100 mm allows working with tools, e.g. for dissecting, measuring or testing.The instrument has an LED incident light and a transmitted light illumination, which can be used individually or combined and each can be infinitely adjusted. The incident light angle can be adjusted in a particularly user-friendly way. With interchangeable wide-field eyepieces (WF10x) and a 9x stereo zoom lens (0.7x-6.3x), a continuous magnification range from 7x to 63x is realised.The coarse and fine focusing allows precise focusing, especially at high magnifications and in photography.The interpupillary distance and dioptric compensation are individually adjustable. The trinocular microscope head can be rotated 360° and has two 45° inclined eyepiece tubes.The trinocular tube can carry an SLR/system camera (APS-C or DX format) or a c-mount camera (sensor size up to 1") using an optional adapter. By means of a switch, the beam path of one eyepiece is deflected towards the camera. This provides 50% more light than a microscope with a permanent beam splitter.To connect an SLR or system camera, the adapter with item no. 5942100 and a camera-specific T2 ring are required.A c-mount camera is connected with the optional adapter item no. 5942101. FEATURESWF 10x eyepieces with 22 mm field of view (referring to a 1x objective)Large, continuous 9x zoom (7x - 63x magnification)With optional adapter suitable for SLR/system cameras and c-mount camerasTripod with coarse and fine focusSCOPE OF DELIVERYMicroscope zoom headLED microscope standWF 10x eyepieces with 22mm field of view (2 pieces)Translucent plastic object plateAC adapter (12V 3A)dust cover

High-quality combo set for precise analyses and brilliant image display. This powerful set combines the professional Science ETD-301 stereo microscope with the modern MikroCam Mini HDMI camera and the appropriate adapter. The perfectly matched unit is ideal for precise observations, high-resolution live displays, and reliable visual documentation of your results.The Microscope in DetailThe BRESSER Science ETD-301 is a reflected and transmitted light stereo magnifier with high-quality optics. It is suitable for use in medicine, agriculture and forestry, criminology, scientific research institutes and schools, as well as for assembly and inspection of small components in precision mechanics and electronics. The particularly wide base with object table allows viewing of larger objects. The maximum object height is approx. 85 mm. The large working distance of 100 mm enables working with tools, e.g. for preparing or dissecting, measuring or testing. The instrument features LED reflected and transmitted illumination, which can be used individually or combined and each continuously adjustable. The reflected light incidence angle is particularly user-friendly adjustable. With interchangeable widefield eyepieces (WF10x) and a 9x stereo zoom objective (0.7x - 6.3x), a continuous magnification range of 7x to 63x is realised. The coarse and fine focusing allows precise sharpness adjustment, especially at high magnifications and for photography. The eye distance and dioptre adjustment are individually adjustable. The trinocular microscope head can be rotated 360° and has two eyepiece tubes inclined at 45°. The trinocular tube can carry a DSLR / system camera (APS-C or DX format) or a C-mount camera (sensor size up to 1'') using an optional adapter. A switch diverts the light path of one eyepiece to the camera. This provides 50% light, more than a microscope with a permanent beam splitter. To connect a DSLR / system camera, the adapter with item no. 5942100 and a camera-specific T2 ring are required. A C-mount camera is connected with the adapter item no. 5942101. MICROSCOPE FEATURESWF 10x eyepieces with 22 mm field of view (based on a 1x objective)Large, continuously adjustable 9x zoom (7x - 63x magnification)Suitable for DSLR / system cameras and C-mount cameras with optional adaptersStand with coarse and fine focusing MICROSCOPE SCOPE OF DELIVERYMicroscope zoom headMicroscope stand with power cableWF 10x eyepieces with 22 mm field of view (2 pieces)Translucent plastic object plateDust coverThe Microscope Camera in DetailThe MikroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required to operate the camera; you can simply connect the MikroCam MINI Full HD HDMI to an existing monitor, TV, projector or smartboard. This makes it ideal for use in teaching. Alternatively, a small BRESSER monitor can be mounted directly on the camera (see item no. 5914120). The HDMI connection is easy to make and the camera is ready for use immediately. No software installation, PC setup etc. is necessary. Thanks to lossless data transmission, very good image quality is achieved and the image always has a consistently high frame rate of 60 fps and is delay-free. This is particularly advantageous when a microscope workstation is to be digitised, e.g. in quality control or production. The supplied USB mouse is connected for control. This allows the three menus (camera settings, measurement* and display) to be controlled. *To perform measurements with the camera, a calibration slide is required (e.g. item no.: 5916710 or 5916720). The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and mouse pointer are then not visible. Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for this. The USB port is only for controlling the camera with the mouse. MICROSCOPE CAMERA FEATURES HDMI connection for direct connection to a monitor, TV, projector or smartboard C-mount thread for easy adaptability to various microscopes (manufacturer-independent) Compatible with USB sticks or SD card readers (max. storage size: 512 GB) No PC/laptop necessary MICROSCOPE CAMERA SCOPE OF DELIVERY MikroCam MINI Full HD HDMI with C-mount connection Power supply (12 V / 2A) USB mouse HDMI cable (approx. 1.5 m)

Practical stereo microscope set for precise observations and clear images: This set combines the Analyth STR Trino stereo microscope with the MikroCam Mini HDMI camera, a 13.3" Full HD monitor, and a 0.5x reduction lens. It is well-suited for accurate analyses, live observations, and documentation of results.The microscope in detailThe Analyth STR Trino features 3 different objective magnifications that can be easily switched by rotating the objective. This allows for direct switching between magnifications of 10x, 20x, and 40x. The stereo design shows structured objects particularly vividly and three-dimensionally. The low 10x initial magnification is especially suitable for working with children, allowing objects up to 20mm in size to be fully viewed. The Analyth STR is therefore particularly flexible in use. It is suitable for insects, plants, minerals, and much more, with applications in hobbies, schools, and professions. The stereo microscope can be used for quality control, horticulture, and environmental studies among other things.The trinocular tube allows for the comfortable connection of a camera. The microscope is compatible (depending on the adapter) with microscope cameras, DSLR, and system cameras.Ask us which adapter you need.The interpupillary distance and diopter adjustment are individually adjustable. The eyepieces have a large field of view of 20mm. They are equipped with removable rubber eyecups and are secured against removal.The microscope can be powered either by the power supply or by 3 batteries (not included). This makes it portable, for example, outdoors in the garden or on an excursion.FEATURES OF THE MICROSCOPEMicroscope with 3 pairs of objectives, objective magnifications 1x; 2x; 4xWide-field eyepieces with eyecups and 20mm field of viewTrinocular tube with 23.2 mm receptacleBright, energy-saving LED lightingIllumination for reflected and transmitted light can be switched separatelyDimmer via membrane buttons with status displayTwo object plates (black/white and glass matte), with specimen clipsDust coverUser manualStand with LED lighting, can be switched separately or together and dimmableSCOPE OF DELIVERY OF THE MICROSCOPEMicroscope with 3 magnifications, 10x; 20x; 40xTrinocular tube, adjustableMetal stand with LED lighting, power supply, and battery compartment2 eyepieces with rubber eyecupsGlass object platePlastic object plate (black/white)Dust coverUser manualThe microscope camera in detailThe MikroCam MINI Full HD HDMI is a particularly compact HDMI camera. A PC or laptop is not required for operating the camera; you can simply connect the MikroCam MINI Full HD HDMI to an existing monitor, TV, projector, or smartboard. This makes it ideal for use in the classroom. Alternatively, a small monitor from BRESSER can also be mounted directly on the camera (see item no. 5914120).The HDMI connection is easy to make, and the camera is ready to use immediately. No software installation, PC setup, etc. is required. Due to the lossless data transmission, very good image quality is achieved, and the image is always displayed with a consistently high frame rate of 60 fps and without delay. This is particularly advantageous when a microscope workstation, for example, in quality control or production, needs to be digitized.To control the camera, the included USB mouse is connected. This allows you to navigate the three menus (camera settings, measurement*, and display).*To take measurements with the camera, a calibration specimen is required (e.g., item no.: 5916710 or 5916720).The camera is also very suitable for presentations, as it operates in automatic mode when the mouse is not connected. The menus and mouse pointer are then not visible.Please note that a direct PC connection is not possible. An HDMI to USB video capture device is required for that. The USB port is only for controlling the camera with the mouse.FEATURES OF THE MICROSCOPE CAMERAHDMI connection for direct connection to a monitor, TV, projector, or smartboardC-Mount thread for easy adaptability to various microscopes (manufacturer-independent)Compatible with USB sticks or SD card readers (max. storage size: 512 GB)No PC/laptop necessarySCOPE OF DELIVERY OF THE MICROSCOPE CAMERAMikroCam MINI Full HD HDMI with C-Mount connectionPower supply (12 V / 2A)USB mouseHDMI cable (approx. 1.5 m)The display in detailThe Full HD display is the ideal complement to the BRESSER MikroCam Pro HDMI and MINI HDMIThe display can be mounted directly on the camera with an adjustable holder. The screen delivers brilliant images without artifacts, as the display has the same resolution as the output image of the camera. With the set of MikroCam and HDMI display, almost any trinocular microscope with camera connection can be upgraded to a digital microscope. This allows for observation independent of a PC.The size of the display is optimally chosen so that the microscope user can microscope as usual while simultaneously viewing the image on the monitor. The display provides optimal image quality with a wide viewing angle of 178°! This allows multiple people to view the image without loss of quality.The image from the microscope camera is displayed on the HDMI screen always without delay and with a high refresh rate of 60 FPS. The representation via HDMI microscope camera on an HDMI monitor is therefore usually of better quality than using a USB camera on a laptop or PC. This is particularly advantageous when work is to be carried out under microscopic control.Many users also benefit from improved ergonomics when the image can be viewed on the HDMI display. Especially higher magnifications with their high numerical aperture can be uncomfortable for eye problems such as floaters. Digital viewing can provide relief here.The display can be powered with the included Y-cable using the same power supply as the camera. A suitable, short, angled HDMI cable is also included, preventing cable clutter at the workplace. The mounting on a MikroCam PRO or MINI is done using two screws. Screws and tools are included in the delivery.FEATURES OF THE DISPLAY16:9 Full HD monitor with a resolution of 1920 x 1080 pixelsActive area: 16.5 x 29.4 cmEasy mounting directly on a MikroCam PRO or MINILarge viewing angle (178°)No separate power supply neededSCOPE OF DELIVERY13.3" displayHDMI cableY-cable for power supply via camera power supplyMounting screws (2 pieces)Hex keyUser manual

Professional combo set for precise analyses and razor-sharp image transmission: This powerful set combines the high-quality Science ETD-301 stereo microscope with the modern MikroCamII 12MP camera and the matching adapter into an optimally coordinated unit. Ideal for detailed observations, high-resolution live displays, and reliable visual documentation of your work results.The microscope in detailThe BRESSER Science ETD-301 is a reflected and transmitted light stereo magnifier with high-quality optics. It is suitable for use in medicine, agriculture and forestry, criminology, scientific research institutes and schools, as well as for assembly and inspection of small components in precision mechanics and electronics. The particularly wide base with object table allows viewing of larger objects. The maximum object height is approx. 85 mm. The large working distance of 100 mm enables working with tools, e.g. for preparing or dissecting, measuring or testing. The instrument features LED reflected and transmitted illumination, which can be used individually or combined and each continuously adjusted. The reflected light incidence angle is particularly user-friendly adjustable. With interchangeable widefield eyepieces (WF10x) and a 9x stereo zoom objective (0.7x - 6.3x), a continuous magnification range of 7x to 63x is realised. The coarse and fine focusing allows precise sharpness adjustment, especially at high magnifications and for photography. The eye distance and dioptre adjustment are individually adjustable. The trinocular microscope head can be rotated 360° and has two eyepiece tubes inclined at 45°. The trinocular tube can carry a SLR / system camera (APS-C or DX format) or a C-mount camera (sensor size up to 1'') using an optional adapter. A switch diverts the light path from one eyepiece to the camera. This provides 50% light, more than a microscope with a permanent beam splitter. To connect an SLR / system camera, the adapter with item no. 5942100 and a camera-specific T2 ring are required. A C-mount camera is connected with the adapter item no. 5942101. MICROSCOPE FEATURESWF 10x eyepieces with 22 mm field of view (based on a 1x objective)Large, continuously adjustable 9x zoom (7x - 63x magnification)Suitable for SLR / system cameras and C-mount cameras with optional adaptersStand with coarse and fine focusing MICROSCOPE SCOPE OF DELIVERYMicroscope zoom headMicroscope stand with power cableWF 10x eyepieces with 22 mm field of view (2 pieces)Translucent plastic object plateDust coverThe microscope camera in detailThe BRESSER MikroCam II cameras enable easy capturing of photos and videos with a microscope. The modern Sony® CMOS sensors deliver brilliant colours with overall very low image noise and are thus the perfect solution for applications where natural colour reproduction is important. The included capture software offers numerous adjustment options for capturing single images and videos. An integrated measurement function* allows measurement already in the live image. The included software supports the following languages: German, English, French, Polish, Turkish, Chinese. The housing has a C-mount connection thread. For use on devices with 23.2 mm mount, an optional variable reduction optic 0.5x (item no. 5914005) is available. For special applications, the camera can also be mounted on the integrated 1/4'' tripod thread. Compared to the MikroCam SP, the BRESSER MikroCamII is equipped with a USB 3.0 connection. This allows up to 8 times higher data rates than USB 2.0 connections. The cameras are thus capable of transmitting more than 25 frames per second (depending on resolution, exposure time and computer performance). This is especially important for living microorganisms. The camera is exceptionally light-sensitive, so short exposure times can be used even at high magnifications or demanding contrast methods. MICROSCOPE CAMERA FEATURESHigh-quality metal housingMany software functions, such as measurement, focus stacking (overlaying multiple shots for increased depth of field), mosaic (to display larger image fields)Image and video recording, including time-lapse functionGood compatibility with various microscopesHighspeed USB 3.0 connectionModern Sony® IMX226 sensor 7.53 mm x 5.64 mm (1/1.7'') SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 3.0, 3.1 MICROSCOPE CAMERA SCOPE OF DELIVERYCamera headUSB 3.0 cable23.2 mm adapter, 30 mm and 30.5 mmCapture and image processing software (for Windows)

High-quality combo set for precise analyses and brilliant image display. This powerful set combines the professional Science ETD-301 stereo microscope with the modern MikroCam PRO HDMI 5MP camera and the appropriate adapter. The perfectly matched unit is ideal for precise observations, high-resolution live displays, and reliable visual documentation of your results.The Microscope in DetailThe BRESSER Science ETD-301 is a reflected and transmitted light stereo magnifier with high-quality optics. It is suitable for use in medicine, agriculture and forestry, criminology, scientific research institutes, and schools, as well as for assembly and inspection of small components in precision mechanics and electronics. The particularly wide base with object table allows viewing of larger objects. The maximum object height is approx. 85 mm. The large working distance of 100 mm enables working with tools, e.g. for preparing or dissecting, measuring or testing. The instrument features LED reflected and transmitted illumination, which can be used individually or combined and each continuously adjusted. The reflected light incidence angle is particularly user-friendly adjustable. With interchangeable widefield eyepieces (WF10x) and a 9x stereo zoom objective (0.7x - 6.3x), a continuous magnification range of 7x to 63x is achieved. The coarse and fine focusing allows precise sharpness adjustment, especially at high magnifications and for photography. The eye distance and dioptre adjustment are individually adjustable. The trinocular microscope head can be rotated 360° and has two eyepiece tubes inclined at 45°. The trinocular tube can carry a DSLR / system camera (APS-C or DX format) or a C-mount camera (sensor size up to 1'') using an optional adapter. A switch diverts the light path from one eyepiece to the camera. This provides 50% light, more than a microscope with a permanent beam splitter. To connect a DSLR / system camera, the adapter with item no. 5942100 and a camera-specific T2 ring are required. A C-mount camera is connected with the adapter item no. 5942101. MICROSCOPE FEATURESWF 10x eyepieces with 22 mm field of view (based on a 1x objective)Large, continuously adjustable 9x zoom (7x - 63x magnification)Suitable for DSLR / system cameras and C-mount cameras with optional adaptersStand with coarse and fine focusing MICROSCOPE SCOPE OF DELIVERYMicroscope zoom headMicroscope stand with power cableWF 10x eyepieces with 22 mm field of view (2 pieces)Translucent plastic object plateDust coverThe Microscope Camera in DetailThe BRESSER MikroCam PRO HDMI 5MP impresses with its excellent image quality combined with user-friendly operation. It delivers the microscope image live and without delay as an HDMI signal with Full HD resolution to a monitor or television. An optional 11'' HDMI monitor (item no. 5914110) can be mounted directly on the camera and provides brilliant and high-contrast images. For high-resolution micro photos, this camera features a high-quality Sony 5MP sensor, so images and videos can be saved on an SD card at resolutions higher than Full HD. The camera functions are operated via mouse directly on the on-screen menu. Measurements can now also be performed via the on-screen menu, turning your microscope with the MikroCam Pro HDMI 5MP into a fully-fledged digital measuring microscope. Additionally, the camera can provide the microscope view in a wireless network via a WiFi module. However, connection to a PC via USB is no longer provided for this model. For this, we recommend the MikroCam Pro HDMI 5914180 model. The professional MikroCamLabII software is still included, allowing images to be edited and analysed afterwards. Image analysis software included in the following languages(no direct image capture via USB possible)GermanEnglishFrenchPolishTurkishIndonesianJapaneseSimplified ChineseTraditional Chinese The software offers numerous functions for image processingMeasurement function (additional object micrometer required e.g. Bresser item no. 5916720): distances, angles, areas (polygons, circles, ellipses)Image stacking from video filesFluorescence microscopy: data for numerous fluorophores are stored in the softwareBatch savingHDR (High Dynamic Range) MICROSCOPE CAMERA FEATURESHDMI connection for monitor or televisionBrilliant image reproduction in Full HD via HDMI (60 frames/sec) or WiFi (up to 25 frames/sec)Measurement function via on-screen menu (object micrometer item no. 5916720 required for calibration)Function for increased dynamic range (WDR)Saving images and videos on SD card (not included) max. 32 GB SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 processor from 6th generation orAMD Ryzen processorOptical drive or internet connection for software downloadUSB 2.0 MICROSCOPE CAMERA SCOPE OF DELIVERYMikroCam Pro HDMI 5MP with C-mount threadPower supplyMouseHDMI cableWiFi moduleSoftware (CD-ROM)

Make amazing discoveries in the microcosmos and capture image and video? That is now possible and you don't need a PC to do it. The digital BRESSER Biolux Touch HDMI microscope is the perfect tool to do it. It is very versatile, ideal for school and hobby. You can easily view the image on the touchscreen.  The integrated, high quality 5MP camera sensor captures images and HD videos directly onto an SD card (SD card not included).The camera is controlled via the touch screen with an intuitive and multi language user menu. With two fingers you can zoom in to see even more detail.The microscope is also perfect to use in schools, for teaching or seminars. The live stream from the microscope can be viewed on a big monitor or TV screen with the HDMI connection. HDMI will deliver a latency free video stream with a framerate of 30 fps.The mechanical crosstable and the coarse and fine focus makes adjusting and screening the sample easy. The 40x objective is sufficient to view small microorganisms and even bacteria, e.g. from a hay infusion. With the additional reflected light you can also view (small) non transparent samples, like plant matter, sand, or insects. The reflected light should be used with the 4x lens. A sample preparation is usually not necessary in this viewing mode, which makes it especially easy for children to get their first glimpse of the micro world.FEATURESCapture images and HD video directly, no PC neededWith 5MP Aptina CMOS camera sensorLCD screen with touch and zoom functionWith fine focus and mechanical crosstableSlot for SD card (up to 32GB, not included)HDMI Type A socketUSB socket3 objectives: 4x/10x/40xLED light (transmitted / reflected), dimmableWith many accessoriesSCOPE OF DELIVERYMicroscope with touch screenHDMI cableAC adapter 5V, 1A (EU)Set of tools (preparation needles, pipette, tweezers, MikroCut)Artemia set to hatch fairy shrimpsCase with 5 prepared slides, 10 empty slides and 10 cover glassesDust cover