- Large and intuitive LCD touchscreen control panel
- Variable adjustable flash power (1/32 to 1/1)
- Strong (Bowens) S-bayonet connection for accessories
- Housing dimensions: 27 x 12 x 12 cm; Weight: 3.08 kg
- Includes studio flash, flash cable, modelling lamp, etc.
Currently not available
With a remote controller you are able to operate up to 8 studio flashlights like the change of the energy level of the flashlight and the switching on of the modelling lamp! Advantages:
- Clear and very large LCD touchscreen control panel
- Easy operation
- Variable adjustable flash output (1/32 to 1/1)
- Mortise flashtube, easily replaceable
- Modelling lamp seperately adjustable
- Intelligent cooling system
- Overheating protection during prolonged use
- Fast recharge time (1-2 sec.)
- Synchronization over long distance (up to 20 meters)
- Strong (Bowens) S-Bayonet Connection for accessories
- Strong tilt head with tripod connection and opening for screen
- Suitable body for sustainable use
- Automatic Slave Flash at the 1st,2nd or 3th preflash of the camera flashlight
- Suitabe for many effect accessories
- Studio Flashlight CM-600
- Protection cap (for transport)
- Synchronic flashlight cable
- 150W modelling lamp
- flashlight pipe
- Tilt head with tripod connection
- Power cable
- (Exclusive metal reflector)
- Flash output: 600 Watt sec.
- Operation: Via large LCD screen
- Adjustable flash output: Variable, 1/32-1/1
- Recharge time: 1-2 sec.
- Power modelling lamp: 150 Watt
- Guide number: GN80
- Engine cooling: Yes
- Overheating protection: Yes
- Color temperature: 5300-5600K
- Flash duration: 1/800s-1/1500s
- Volt synchronic cable: 5V
- Length synchronic cable: 5 meter
- Main supply: 220V and 50Hz
- Flash relaxation possibilities: Test button, flashlight cable, slave, receiver and remote control
- Photocell: Reception up to 20 meters
- Connection accessories: S-Bayonet (suitably i.a. Bowens)
- Weight: 2,9 kg
- Size casing: 27 x 12 x 12 cm
- Size transport: 41 x 12 x 20 cm (including handle + protection cap + tripod connection)
Batteries included: | No |
---|---|
Color temperature (Kelvin) from: | 5200 |
Color temperature (Kelvin) to: | 5600 |
Colour: | blue |
Flash charging time (sec.): | 1.0 - 2.0 |
Flash counter: | No |
Flash lamp: | Yes |
Flash power from: | 1/32 |
Flash power to: | 1/1 |
Guide number: | 80 |
Interfaces: | 3.5 mm Sync connection |
LED modelling lamp: | No |
Lamp included: | Yes |
Metal reflector: | No |
Navigation: | LCD Display |
Net Weight total (incl. accessories) (g): | 3590 |
Net weight heaviest part (kg): | 3.08 |
Overheat protection: | No |
Photo cell: | Yes |
Power cord included: | C13/Euro |
Power flash lamp (Watt): | 600 |
Power modelling lamp (Watt): | 150 |
Power supply 1): | 180-250V at 50 Hz or 100-120V at 60 Hz AC |
Product series: | CM series |
Protection cap: | Yes |
Synchro flash cord included: | Yes |
Tilt head with tripod connection: | Yes |
Total height (mm): | 230 |
Total length (mm): | 400 |
Total width (mm): | 130 |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
www.bresser.de
- Risk of overheating! Ensure adequate air circulation.
- Avoid moisture! Do not use the device in damp or wet environments.
- Risk of burns! Lamps can become hot allow them to cool fully before replacing.
- Electrical safety! Use only the recommended power source and regularly check cables for damage.
- Stable positioning required! Ensure tripods are securely set up to prevent tipping over.
- Fire hazard! Keep flammable materials away from lighting.
- Eye protection! Do not look directly into the lamp to avoid eye damage.
- Switch off before cleaning! Turn off the device and let it cool before cleaning with a dry cloth.
- Store dust-free! Keep in a dry and clean place.
- Follow intended use! Use the device only for its designated purpose and according to the instructions.
- Ensure child safety! Keep out of reach of children to prevent fire or impact hazards.
- Risk of pinching! Be cautious with moving parts such as adjustable tripods and clamps.
- Safe transport! Pack the product carefully to minimise damage during transit.
- Prevent heat damage! Extreme heat or cold can shorten the lifespan of the lamp.