BRESSER Studio Flashes Set: 2x CM-400 + Promotion Package 4
Product number:
F000517
EAN:
4007922019918
WEEE-Reg.-Nr.:
DE 34323861
Weight:
0 kg
Product information "BRESSER Studio Flashes Set: 2x CM-400 + Promotion Package 4"
This BRESSER Flashlight of the CM-series is a professional studio
flashlight with a variable adjustable modelling lamp, which is
independently of the
flashlight, continuously full light, on/off or proportional
controllable. The integrated Sony microprocessor creates a reliable
and constant power
output. At the back is a comfortable and large touch screen
(6x8cm) on which you can fast and easily enter the settings for the
studio flashes
and modelling lamp. With the help of the optional remote control
it is also possible to regulate these values up to a distance of
20m (especially
handy if the studio flashes are a bit higher or far apart from
each other - then you don't always have to do a lot of running).
With the help of the
hand control, eight studio flashes can be operated. The integrated
slave creates automatically more flashes, if necessary. It can be
set on the
1st, 2nd or 3th flashlight of your camera! Thanks to the strong
"twist-click" bayonet connection at the front of the flashlight, the
largest available accessories fit to this flashlight. It is
suitable for amateur as well as for professional photographes and
used for school,
product and portrait photography. Stylish and suitable rubberized
metal housing.
Optional you can operate the CM-400 with a remote controller!
With a remote controller you are able to operate up to 8 studio flashlights like the change of the energy level of the flashlight and the switching on of the modelling lamp!
Advantages:
With a remote controller you are able to operate up to 8 studio flashlights like the change of the energy level of the flashlight and the switching on of the modelling lamp!
Advantages:
- Clear and very large LCD touchscreen control panel
- Easy operation
- The integrated Sony Microprocessor creates a reliable and constant power output
- Variable adjustable flash output (1/32 to 1/1)
- Mortise flashlight pipe, easy to replace yourself
- Modelling lamp seperate adjustable
- Intelligent cooling system
- Overheating protection during prolonged use
- Fast recharge time (1-2 sec.)
- Synchronization over long distance (up to 20 meters)
- Strong (Bowens) S-Bayonet Connection for accessories
- Strong tilt head with tripod connection and opening for screen
- Suitable body for sustainable use
- Automatic Slave Flash at the 1st,2nd or 3th preflash of the camera flashlight
- Suitabe for many effect accessories
- 2x Studio Flashlight CM-400
- 2x Protection cap (for transport)
- 2x Synchronic flashlight cable
- 2x 150W modelling lamp
- 2x flashlight pipe
- 2x Tilt head with tripod connection
- 2x Power cable
- 2x Tripod 240cm
- 2x Softbox 60x90cm
- 1x M-13 Metal Reflector
- 1x screen diffuse white 101cm
- Flash output: 400 Watt sec.
- Operation: Via large LCD screen
- Adjustable flash output: Variable, 1/32-1/1
- Recharge time: 1-2 sec.
- Power modelling lamp: 150 Watt
- Guide number: GN65
- Engine cooling: Yes
- Overheating protection: Yes
- Color temperature: 5300-5600K
- Flash duration: 1/800s-1/1500s
- Volt synchronic cable: 5V
- Length synchronic cable: 5 meter
- Main supply: 220V and 50Hz
- Flash relaxation possibilities: Test button, flashlight cable, slave, receiver and remote control
- Photocell: Reception up to 20 meters
- Connection accessories: S-Bayonet (suitably i.a. Bowens)
- Weight: 2.9 kg
- Size casing: 27 x 12 x 12 cm
- Size transport: 42 x 12 x 20 cm (including handle + protection cap + tripod connection)
| Product series: | CM series |
|---|
