- Studio flash CM-400 with touchscreen and 150 W adjustable lamp
- Flash power: 400 Watt sec; LCD display + remote control
- Colour temperature: 5300 - 5600 K; Flash duration: 1/800 s - 1/1500 s
- Dimensions of housing: 27 x 12 x 12 cm / weight: 2.9 kg
- Includes: studio flash, lamp, tilt head, flashlight tube, cable
Product number:
F000001
EAN:
4007922014869
WEEE-Reg.-Nr.:
DE 34323861
Product information "BRESSER Studio Flashlight CM-400 with touchscreen"
This BRESSER Flashlight of the CM-series is a professional studio flashlight with a variable adjustable modelling lamp, which is independently of the
flashlight, continuously full light, on/off or proportional controllable. The integrated Sony microprocessor creates a reliable and constant power
output. At the back is a comfortable and large touch screen (6 x 8 cm) on which you can fast and easily enter the settings for the studio flashes
and modelling lamp. With the help of the optional remote control it is also possible to regulate these values up to a distance of 20 m (especially
handy if the studio flashes are a bit higher or far apart from each other - then you don't always have to do a lot of running). With the help of the
hand control, eight studio flashes can be operated. The integrated slave creates automatically more flashes, if necessary. It can be set on the
1st, 2nd or 3th flashlight of your camera! Thanks to the strong "twist-click" bayonet connection at the front of the flashlight, the
largest available accessories fit to this flashlight. It is suitable for amateur as well as for professional photographes and used for school,
product and portrait photography. Stylish and suitable rubberized metal housing.
Optional, you can operate the CM-400 with a remote controller!
With a remote controller you are able to operate up to 8 studio flashlights like the change of the energy level of the flashlight and the switching on of the modelling lamp! Advantages:
With a remote controller you are able to operate up to 8 studio flashlights like the change of the energy level of the flashlight and the switching on of the modelling lamp! Advantages:
- Clear and very large LCD touchscreen control panel
- Easy operation
- Variable adjustable flash output (1/32 to 1/1)
- Mortise flashtube, easily replaceable
- Modelling lamp seperately adjustable
- Intelligent cooling system
- Overheating protection during prolonged use
- Fast recharge time (1 - 2 sec.)
- Synchronization over long distance (up to 20 meters)
- Strong (Bowens) S-Bayonet Connection for accessories
- Strong tilt head with tripod connection and opening for screen
- Suitable body for sustainable use
- Automatic Slave Flash at the 1st, 2nd or 3rd preflash of the camera flashlight
- Suitabe for many effect accessories
- Studio Flashlight CM-400
- Protection cap (for transport)
- Synchronic flashlight cable
- 150 W modelling lamp
- flashlight pipe
- Tilt head with tripod connection
- Power cable
- (Exclusive metal reflector)
- Flash output: 400 Watt sec.
- Operation: Via large LCD screen
- Adjustable flash output: Variable, 1/32-1/1
- Recharge time: 1-2 sec.
- Power modelling lamp: 150 Watt
- Guide number: GN65
- Engine cooling: Yes
- Overheating protection: Yes
- Color temperature: 5300-5600K
- Flash duration: 1/800s-1/1500s
- Volt synchronic cable: 5V
- Length synchronic cable: 5 meter
- Main supply: 220V and 50Hz
- Flash relaxation possibilities: Test button, flashlight cable, slave, receiver and remote control
- Photocell: Reception up to 20 meters
- Connection accessories: S-Bayonet (suitably i.a. Bowens)
- Weight: 2.9 kg
- Size casing: 27 x 12 x 12 cm
- Size transport: 41 x 12 x 20 cm (including handle + protection cap + tripod connection)
| Batteries included: | No |
|---|---|
| Flash counter: | No |
| Flash lamp: | No |
| LED modelling lamp: | No |
| Lamp included: | No |
| Metal reflector: | No |
| Overheat protection: | No |
| Photo cell: | No |
| Product series: | CM series |
| Protection cap: | No |
| Synchro flash cord included: | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Risk of overheating! Ensure adequate air circulation.
- Avoid moisture! Do not use the device in damp or wet environments.
- Risk of burns! Lamps can become hot allow them to cool fully before replacing.
- Electrical safety! Use only the recommended power source and regularly check cables for damage.
- Stable positioning required! Ensure tripods are securely set up to prevent tipping over.
- Fire hazard! Keep flammable materials away from lighting.
- Eye protection! Do not look directly into the lamp to avoid eye damage.
- Switch off before cleaning! Turn off the device and let it cool before cleaning with a dry cloth.
- Store dust-free! Keep in a dry and clean place.
- Follow intended use! Use the device only for its designated purpose and according to the instructions.
- Ensure child safety! Keep out of reach of children to prevent fire or impact hazards.
- Risk of pinching! Be cautious with moving parts such as adjustable tripods and clamps.
- Safe transport! Pack the product carefully to minimise damage during transit.
- Prevent heat damage! Extreme heat or cold can shorten the lifespan of the lamp.
Skip product gallery
Accessories
BRESSER D-20 Multi Light Stand 220cm with Wheels
€169.00*
A very professional, strong and stable light stand made of aluminium, which ca be moved to any desired position quickly and easily. The well running wheels have a diameter of 8 cm and are equipped with a brake system. Even with the biggest softboxes the whole is still very stable.1x tube clamp with spigot adapter is already included. With additional, optionally available tube clamps you can attach several studio flashes or accessories to the tripod. The tripod weighs 9.8 kg! FEATURESAluminium light standMax. tripod height: 220 cmWheels with brakesFolded height: 100 cmMax. tube diameter: 41 mm1x tube clamp with spigot adapter1x bagWeight: 9.8 kgLoad capacity: 15 kg SCOPE OF DELIVERY1x light stand1x tube clamp
Currently unavailable
BRESSER BR-C24 C-Stand professional Boom Stand
€185.00*
The BR-C24 BRESSER C-Stand Boom Stand is one of the strongest aluminium tripods for the photo studio. All parts and connecting elements are made of metal.
The C-stand, also called Century stand, can also hold the heavy Fresnell lamps without problems. With the extension arm, lamps or other accessories can be moved in all directions, whether up, down to the left or right. Studio lamps or flashes can also be attached directly to the spigot connection of the tripod. The clamp supplied is for pipes with a minimum diameter of 5, 14, 16 and 23 mm and a maximum diameter of 13, 24, 25 and 31 mm.
The BRESSER BR-C24 Profi C-Stand Boom Stand consists of 2 packages. A package (4,9kg, 8 x 8 x 127,5cm) contains a boom arm and a thick 35/30/25mm tripod tube with 3 segments and spigot adapter. The other package (4.2kg, 27.5 x 11 x 52cm) contains a clip for fixing accessories and the 3-leg base.
FEATURES
3 Segments
Male thread (1/4 in.)
Booth approx. 82 x 82cm
Air suspension system
Max. Height: 300 cm + 120cm extension arm
Min. Height: 133 cm
Weight: 8,5 kg
Max. Load capacity: 8.0 kg
SCOPE OF DELIVERY
1x robust 3-leg base
1x thick 35/30 / 25mm tripod tube with 3 segments and spigot adapter
1x extension arm
1x bracket for attaching accessories
Available
