Doppelt flexibel für Ihren 3D-Druck: Realisieren Sie in dem WLAN-3D-Drucker mit Dual-Extruder ganz einfach Ihre kreativen Ideen in 2 Farben und 2 Materialien.
- 3D-Druck in zwei Farben/Materialien ohne Filamentwechsel
- Maximale Druckgröße: 227 x 148 x 150 mm
- Beheizte Bauplattform, für PLA 50° C, für ABS 120° C
- Ganzmetall Rahmenkörper für mehr Stabilität
- Turbokühlgebläse für bessere Druckresultate
- 8,9 cm großer, intuitiver LCD-Touchscreen
- Inklusive 1kg PLA-Filament weiß und 1kg PLA-Filament schwarz
- Nettogewicht des Druckers: 14,8 kg
- Sprachen: Deutsch, Englisch, Französisch, Spanisch, Portugiesisch, Polnisch
€415.00*
% €849.00* (51.12% saved)Available, delivery time: 1-3 days
Batteries required: | 0 |
---|---|
Net Weight total (incl. accessories) (in kg): | 14.64 |
Temperature range max. (°C): | 120 |
Temperature range min. (°C): | 0 |
Total height (mm): | 560 |
Total length (mm): | 530 |
Total width (mm): | 370 |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
www.bresser.de
- NOTICE! Familiarize yourself with this manual and read all included instructions before starting the setup and operation of the device. Failure to heed warnings and instructions may lead to personal injury, fire, and damage to the device or other items.
- Work environment safety: Keep the workplace clean! Do not operate the 3D printer if flammable liquids, gases, or dust are present. Keep children and untrained individuals away from the 3D printer.
- Power supply safety: Only operate the 3D printer via a grounded outlet. Do not make any changes to the power plug of the 3D printer. Do not operate the 3D printer in a misty or humid environment. Do not expose the 3D printer to direct sunlight. Do not use the power cord for any purpose other than its intended use. Do not operate the device during a thunderstorm. To avoid accidents, disconnect the device from the power supply if it is not used for an extended period.
- Do not immerse the device in water. Do not expose the device to strong impacts, vibrations, dust, prolonged high temperatures, or extreme humidity. This can cause malfunctions, short circuits, damage to batteries and components.
- Precautions: Do not leave the device unattended for long periods. Do not make any modifications to the device. Lower the print bed before loading/removing filament. (The distance between the nozzle and print bed should be at least 50 mm.) Operate the device in a well-ventilated environment. Do not use the device for unlawful purposes. Do not use the device to create containers for food storage. Do not use the device to create electrical devices. Do not put models in your mouth. Do not remove models with force.
- Environmental conditions: Temperature: Room temperature 15-30°C, Humidity: 20%-70%
- Filament guidelines: Use filament only for its intended purpose! Only use BRESSER filament or filament from brands recognized by BRESSER! Filament storage: Over time, some degradation can occur with all polymers. Only unpack the filament when you need it. The filament should be stored in a clean, dry environment, and protected from sunlight. Legal notice: All information in this document may be expanded or modified without prior notice.