Camera adapter
- adapter to connect a SLR camera to a telescope
- for eyepieces with a plug-in diameter of 1.25'' (31,7 mm)
- T2 ring for camera additionally required
- scope of supply: camera adapter
€39.00*
Unfortunately, no longer available
Product information "BRESSER Telescope Camera Adapter (1.25") (Refurbished)"
The BRESSER Telescope Camera Adapter is the connecting piece between your 35 mm DSLR camera and the telescope. The connection to your camera can be achieved with the fitting T2-mount (T2-mount optional). For the focal fotography, you need to unscrew the bottom part of the adapter and attach the camera with the fitting T2-mount directly to the push-on contact. The eyepiece projection is possible when you put an eyepiece into the adapter and tighten the knurled screw. After that, you have to attach the T2-mount and the camera and you are ready to go.
FEATURES
- Eyepiece connection diameter: 31.7 mm (1.25")
- Eyepiece total diameter max. 35mm
- Telescope Camera Adapter 1.25"
| Batteries required: | No |
|---|
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
www.bresser.de
- General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.