BRESSER Tripod VT-01

The BRESSER BX-10 Pro Tripod with Fluid Pan-and-Tilt Head is a very versatile tripod that is height and angle adjustable. The ball head has a load capacity of 12 kg. This makes the tripod extremely flexible and one can work with different camera models, binoculars, spotting scopes and astronomy binoculars. The non-slip rubber feet are ideal for grip on smooth surfaces indoors, but also offer extremely good grip on muddy, sandy and uneven surfaces outdoors. This all-round tripod by BRESSER features aluminium alloy tripod legs and a fluid head with a 70 mm diameter base. The four-piece legs are locked with a quick-lock swivel system. The base of the ball head is equipped with a 3/8" mounting thread. For panning and tilting the ball head, the supplied handle is used. This handle can be mounted on the left or right side. Also, the handle can be adjusted in length with a minimum length of 26 cm and a maximum length of 35 cm. The desired length can be fixed with the handle extension lock. The folded tripod has a height of 82 cm and can be extended to a height of 184 cm. If you also extend the centre column, you reach a maximum height of 216 cm. The minimum working height of the tripod is 78 cm. If you spread the legs to their maximum, the minimum working height is 62 cm. The tripod head allows 360-degree swivels and tilts from +90 to -70 degrees. The quick release plate is universal and features a standard tripod connection (1/4" screw) and a 3/8" screw that allows you to easily mount any camera, binocular adapter, spotting scope or astronomy binocular on the tripod head. Thanks to the built-in level, you can also see if your tripod is level. The unused screw can be turned into the appropriate compartment on the tripod head so that it does not get lost and is always at hand. The quick release plate is secured by a safety device. The tripod with fluid head weighs 3,786 grams. The center column has a hook that helps to ensure stability. For example, use a sandbag, water bag, backpack and even rocks in a bag to improve balance. A carrying bag is included for easy storage and transportation. FEATURES Very sturdy all-in-one tripod High quality construction Fluid Pan-and-Tilt Head Folded length: 82 cm Minimum working height: 78 cm (tripod legs normally spread) Minimum working height: 62 cm (tripod legs spread to the maximum) Maximum working height: 216 cm Tripod load capacity (as a set): 10-12 kg Load capacity ball head: 10-12 kg Tripod load capacity: 20 kg Tripod and ball head weight: 3,786 grams Level Height adjustable central column Hook for counterweight 1/4" and 3/8" connection Carrying bag SCOPE OF DELIVERY BRESSER BX-10 Pro Tripod BRESSER BX-10 Pro Fluid Pan-and-Tilt Head Fluid Pan-and-Tilt Head handle Quick Release Plate 50 x 92 mm 1/4" screw 3/8" screw Carrying bag with pocket

The BRESSER BR-2504X8C-B1 is a versatile and reliable camera stand for use in a wide range of scenarios. Made from 100% carbon fibre, these camera stands are extremely stable and offer additional stiffness and a very low total weight. The stand comes with two centre columns. The small centre column has a length of 9.5 cm, and gives the stand a minimum height of 25 cm when the ball head is used. The large centre column has a length of 33 cm, and enables the stand to reach a maximum height of 165 cm when the ball head is used. The bottom end of the centre columns features a spring-loaded hook for securing a counterweight for additional stability. The legs can be adjusted individually in three different positions. One leg can be removed and used as a monopod by attaching the ball head onto the leg. This stand comes with a full aluminium BRESSER B-1 ball head, which rotates 360 degrees and can be tilted to any angle, including the standing position. The Arca Swiss-compatible quick release plate can be attached to a camera or a viewer in order to ensure a secure connection to the B-1 ball head. A rotatable ring is attached to the base of the ball head, and allows the camera to swivel without the observer while maintaining the same height and level, making it ideal for panorama photography. FEATURES Full carbon tripod Aluminium ball head Maximum load of 10 kg Minimum height of 25 cm Maximum height of 165 cm Height when folded: 47 cm Weight of stand and head: 1450 grams Twist-lock system Convertible to monopod Interchangeable centre columns Long full carbon centre column Short aluminium centre column Arca Swiss quick release plate Hook for counterweight on long centre column 360-degree rotatable and tiltable ball head Double spirit level on ball headDegree markings for panorama shotsThreaded screw quick-release plate 1/4" WHAT’S INCLUDEDCamera stand Ball head Quick release plate Long centre column Short centre column Hex key Storage bag for tripod head Tripod bag with shoulder strap Instructions

Nature photographers and travel photographers have very high requirements for camera stands. The BRESSER BR-2205-N1 carbon camera stand meets all of these requirements! A low weight of just over 1 kg incl. ball head and a small packing size thanks to sophisticated folding technology make this photo tripod the ideal companion for all photographers who are often on the move. The legs consist of 5 segments and feature an adjustable length. The angle can also be adjusted in 3 steps, allowing you to configure the camera stand for a wide range of scenarios, including uneven terrain. BALL HEAD FEATURES Aluminium ball head Maximum load of 8 kg Quick release plate with ¼’’ camera thread Two built-in spirit levels (vertical and horizontal) Angle scale for panorama shots Height: 9 cm Weight: 290 g TRIPOD FEATURES Carbon tripod Tripod legs with 5 segments and screw cap, individually adjustable Hook for counterweight on centre column 3/8’’ connection screw for tripod head One tripod leg with foam padding Tripod legs adjustable in three positions Height with wide stand: Gradually adjustable height from 27.5 cm to 85.5 cm Height with narrow stand: Gradually adjustable height from 38 cm to 118 cm Height as floor stand: Gradually adjustable height from 24.5 cm to 38 cm Weight: 800 g Length when folded: 34 cm WHAT’S INCLUDED Camera stand Ball head Quick release plate Hex key Storage bag for tripod head Tripod bag with shoulder strap Instructions

The models of the Traveler series by BRESSER are lightweight tripods, which can also be taken on long hikes and trekking trips. They are equipped with quick-release fasteners on the tripod legs as well as a multifunctional 3-way panoramic head with quick-change plate and water balance. The height can be precisely adjusted using the hand crank on the center axis. For a better carrying comfort there is a handle and on the lower side of the middle axle there is a hook for fastening a counterweight. Suitable for photo and video cameras as well as for lighter spectroscopy. FEATURESSegments: 3Max. Diameter: Ø23mm to Ø30mmMax. Height: 180cmFolded: 71cmWeight: 1660gMax. Load: 2.7-5kg SCOPE OF DELIVERYtripodquick-release platebag

The BRESSER Pirsch Gen II spotting scopes are primarily intended for nature observers. Equipped with a light-intense, fully broadband multi-coated 80 mm lens, they allow higher magnifications even at twilight. This spotting scope is also equipped with the high-quality UR coating for brighter and higher-contrast images. Together with the waterproof and nitrogen-filled housing and the non-reflective armouring, nature observers can determine e.g. bird species in any weather, even at long distances. Photography Enthusiasts of digital photography will find also a reliable tool in the Pirsch series: together with the DSLR adapters 49-20002 or 49-14911 almost all digital cameras or smartphones can be connected to this telescope. Robust materials The focus and eyepieces are made of sturdy metal, ensuring long-lasting pleasure when using the Pirsch spotting scope range. The rubber armouring is manufactured to ensure a firm grip and protection against knocks during use in the field. Compensation The Pirsch spotting scopes of Gen. II are all equipped with the new UR coating. This special coating ensures better light transmission and therefore provides a bright image even in difficult lighting conditions.   10:1 DeLuxe focusing An important factor in optical devices is optimal focusing. Here, we at BRESSER have paid great attention to fast and easy focusing as well as very precise focusing. Thus, the focus of the Pirsch spotting scope can be adjusted quickly and down to the last cm. This is ensured by the 10:1 ratio of the focus. Waterproof and nitrogen filled All Pirsch models are waterproof and nitrogen filled, so you have the perfect optical companion with you in all weather conditions. Rain or fog present no obstacle to using the Pirsch. Fogging from the inside in case of large temperature differences is prevented by the nitrogen filling and thus ensures that the device is always ready for use and provide clear views, no matter what the prevailing weather conditions are. PROPERTIES Zoom perspective relaxed 45° view through zoom eyepiece fully multi-coated optics UR coated optics very high light gathering capacity waterproof and nitrogen filled housing What's Included Spotting scope Carry bag for spotting scope Instructions

he BRESSER TR-688V is a solid video tripod at a small price! The three tripod legs can be individually adjusted in length thanks to the practical quick-release buckles. The rubber feet can be angled as required. So you can find stable stand even on slopes and on uneven ground. Ideal for photographing outdoors! 360 ° shots are not a problem with the 2-way tilt. With the help of the handgrip, the tripod head can be rotated 360 ° smoothly. In addition, the camera can be tilted up to 90 ° over two axes. An integrated water scale and canister bubble ensure the required precision. Want to quickly switch between cameras with different lenses and settings? With the quick-release plate is no problem! FEATURES especially lightweight and transportable suitable for cameras and spotting scopes up to a total weight of 3 kg infinitely height adjustable from 63.5 cm to 171 cm 2-way tilt with quick-release plate 1/4 "photo screw two integrated circular levels individually adjustable tripod legs for uneven terrain by hand crank extendable column Hook for attachment of a counterweight for more stability SCOPE OF DELIVERY Video tripod with 2-way tilt Quick release plate Tripod bag with shoulder strap

Whether you’re exploring the night sky, the microscopic world, or wildlife, the BRESSER WiFi Eyepiece Camera with Display lets you capture every highlight with impressive photos and videos. Thanks to its adjustable clamp, it quickly attaches to any eyepiece with a diameter of 30 to 65 mm. Once mounted, you can view your adventures in real time on the integrated 1.47-inch (3.7 cm) screen. From there, just switch to your mobile device for seamless control via the intuitive app. Capture every detail with the eyepiece camera With 2K video quality and pin-sharp photos, capture whatever crosses your path. Save your media in the standard formats MP4 and JPG on a MicroSD card (not included). You can also download your images and videos to the app’s album for easy access anytime. Advanced features for perfect shots The BRESSER WiFi Eyepiece Camera offers various options to suit different viewing scenarios. Choose between videos with or without sound to match your subject. The loop recording feature automatically captures clips in 1, 3, or 5-minute intervals, giving you plenty of time to record and review. To share your discoveries with family and friends, simply use the app to share your photos and videos. Look forward to capturing detailed shots through telescopes, spotting scopes, binoculars, microscopes, and more – all with the BRESSER WiFi Eyepiece Camera with Display! FEATURES Universal WiFi eyepiece camera for telescopes, binoculars, microscopes, spotting scopes, and more Integrated 1.47-inch (3.7 cm) display Video resolution: 2K (30 fps) Photo resolution: 1,920 x 1,080 px CMOS sensor resolution: 4 MP File formats: MP4 (video), JPG (photo) Videos with or without sound Loop recording option: 1 / 3 / 5 min App (Android / iOS) with user-friendly video and photo editing functions Maximum recording time with WiFi: 130 minutes Compatible with eyepiece diameters from 30 – 65 mm Storage medium: MicroSD card up to 128 GB (not included) SCOPE OF DELIVERY Eyepiece camera USB-C cable User manual