BRESSER Universal Power Supply 230/6V, 2.0A Europlug (Refurbished)

Refurbished

Sichere Spannungsversorgung für Teleskope und Zubehör
Eingang: 100-240 V ~ 60/50Hz
Ausgang: 6 Volt DC 2000 mA
Länge DC Anschlusskabel: 180cm
Passend für BRESSER RA-Motor für EQ-3 u. EXOS-1 Art.Nr. 4951400+4951600
Passend für BRESSER Foto-Montierung Art.Nr. 4964111+4964110

€15.00*

% €29.00* (48.28% saved)

Prices include VAT. Shipping costs not included

Available, delivery time: 1-3 days

Product number: R4930020

EAN: 4007922082073

WEEE-Reg.-Nr.: DE 34323861

Product information "BRESSER Universal Power Supply 230/6V, 2.0A Europlug (Refurbished)"

NOTE: This item is a used or returned product. This means: The item may show slight signs of use; some accessories may be missing; the packaging may differ from the original packaging. Please note that refurbished items generally come with a 12-month warranty.

Batteries required:	0

Produkt- und Sicherheitshinweise

Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact:
www.bresser.de

Warning notes

Safety instructions for power supplies and chargers: Warning! To avoid damage to your device and possible injury, please follow the safety instructions below: Safety measures and instructions: 1. 2. 3. 4. Explanation of risks: Children and teenagers should be educated on the safe use of power supplies (e.g., no moisture, no force, no improper use). Supervision: Children under 14 should be supervised when handling power supplies. Checking the devices: Only use power supplies that are intended for the specific device. Universal power supplies can cause damage if set incorrectly. Storage: Power supplies should be kept out of reach of small children. Instructions for power supplies: Safe handling and use. Power supplies are essential to safely power electrical devices. To avoid damage to devices and hazards like short circuits or overheating, careful handling is important. Here are the general instructions: General safety notes: Use the power supply intended for your device to avoid damage. Do not use power supplies with visible damage to the housing or cables. Keep power supplies away from liquids and damp environments. Ensure sufficient ventilation during operation, and do not cover the power supply. Connecting and operating: Check voltage and power: Ensure that the output voltage and current of the power supply match the device's requirements. For adjustable power supplies, choose the correct setting before connecting. Correct plugging: Plug the power supply into the device first, then into the socket. Always pull on the plug when removing, not the cable. Use only intact sockets. Do not overload power strips. Ensure the cable is safely routed: Lay the cable in a way that there is no tripping hazard or risk of damage. Storage: Store power supplies at room temperature, away from direct sunlight, heat sources, or moisture. Coil the cable loosely to avoid breaks and knots. Special caution with: Universal power supplies: Ensure that the polarity and voltage are correctly set before connecting the power supply. High-power supplies: These can cause overheating or device damage if handled improperly. Older power supplies: Older models without modern protection mechanisms should be regularly checked for defects. Cleaning: Disconnect the power supply from the socket and device before cleaning it. Use a dry, soft cloth. Do not use liquids or chemicals. Disposal: Defective power supplies should not be disposed of in household waste. Take them to a local e-waste collection point. Warning signs: Avoid overload: Do not connect devices that exceed the maximum power of the power supply. Do not use defective power supplies: Replace power supplies with frayed cables or unusual behavior (e.g., humming, overheating) immediately. Do not attempt repairs: Do not open or repair power supplies yourself. This is dangerous and may void the warranty. FAQs: What should I do if the power supply gets hot? Disconnect the power supply from the power source and let it cool down. Check if the ventilation openings are blocked or if the connected device is overloaded. How do I know if I have the correct power supply? Check the output voltage (Volts), current (Amps), and power (Watts). These details can be found on the device or in the manual. Following these instructions will help ensure the safe and long-lasting operation of your power supplies. Always refer to the manufacturer's specific instructions! Improper use can lead to electrical shocks, fires, or other dangers. Therefore, always follow the safety instructions mentioned above.