BRESSER Weather Station ClimaTemp TB with LCD Colour Display
- DFC radio controlled clock, weather forecast & alarm clock with snooze function
- Basis: power supply, optional 3 AAA, sensor: 2x AAA batteries
- Max. 3 sensors connectable (1 incl.); range of 30 m
- Dimensions: 144x142x25 mm, weight: 450 g
- Incl.: main unit, outdoor sensor, adapter, manual
- Required batteries: 5x AAA
Product number:
7007201
EAN:
4007922061993
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER Weather Station ClimaTemp TB with LCD Colour Display"
This BRESSER Weather Station ClimaTemp TB has a clearly arranged colour display, which is divided into 4 areas.
On the right side the measured values for inside and outside are displayed. So you always have temperature and humidity in view.
The weather forecast for the next 12 hours is calculated by the measured values and is displayed graphically in the upper left corner. Six different kind of weather conditions can be displayed.
Of course the current time, which is transmitted by DCF radio signal, the date, the day of the week and phase of the moon are also displayed. Furthermore, you can set two alarm times and activate the snooze after the alarm rings by pressing the button.
The weather station can be powered by batteries or with the included AC/DC adapter. While using batteries, the backlight can be activated by the snooze button for 7 seconds.
FEATURES BASIS STATION
FEATURES SENSOR
SCOPE OF DELIVERY
On the right side the measured values for inside and outside are displayed. So you always have temperature and humidity in view.
The weather forecast for the next 12 hours is calculated by the measured values and is displayed graphically in the upper left corner. Six different kind of weather conditions can be displayed.
Of course the current time, which is transmitted by DCF radio signal, the date, the day of the week and phase of the moon are also displayed. Furthermore, you can set two alarm times and activate the snooze after the alarm rings by pressing the button.
The weather station can be powered by batteries or with the included AC/DC adapter. While using batteries, the backlight can be activated by the snooze button for 7 seconds.
FEATURES BASIS STATION
- LCD colourdisplay with two brightness levels
- Inside temperature (°C/°F) and humidity
- Outside temperature (°C/°F) and humidity
- Barometer display in hPa
- Display of time, date, weekday and moon phase
- Time can be set via DCF radio signal or manually
- Weather forecast for the next 12 hours (sunny, partly cloudy, cloudy, rainy, stormy, snowy)
- Alarm function with two adjustable alarm times and snooze function
- Maximum connectable sensors: 3
- Suspension device and fold-out stand
- Power supply: 3x AAA batteries (not incl.) or optional via the included power adapter
FEATURES SENSOR
- Temperature and humidity
- With display for direct measured data readout
- Range: up to 80 metres
- Battery operated: 2x AAA batteries each (not included)
- Can be placed on a table or wall-mounted
SCOPE OF DELIVERY
- Main unit
- Outdoor sensor
- AC/DC adapter
- Manual
| 2) Footnote: | Battery operation optionally. Batteries not included. |
|---|---|
| Assembly required: | No |
| Batteries included: | No |
| Batteries required: | Yes |
| Clock setting: | automatisch per Funksignal oder manuell |
| Colour: | black |
| Display height (cm): | 11 |
| Display size (diagonal in cm): | 15.38 |
| Display width (cm): | 11 |
| Extended warranty (years): | 5 |
| Features: | Alarm clock function , Backlight , DCF time signal , Moon phases , Snooze function , Temperature alarm , Weather forecast |
| GPS: | No |
| Height of the largest digit on the display (cm): | 2.3 |
| Inside temperature (°C) from: | 0 |
| Inside temperature (°C) up to: | 50 |
| Material: | Plastic |
| Measurement function: | Barometric pressure , Humidity (inside) , Humidity (outside) , Inside temperature , Outside temperature |
| Net Weight total (incl. accessories) (g): | 406 |
| Net weight (without access.) (g): | 253 |
| Number of sensors included in the package: | 1 |
| Outside temparature (°C) from: | -40 |
| Outside temparature (°C) up to: | 70 |
| Power supply unit included: | No |
| Smartphone app: | No |
| Total height (mm): | 25 |
| Total length (mm): | 144 |
| Total width (mm): | 142 |
| Transmission range (m): | 80 |
| Typ [Batteries]: | AAA |
| Type of mounting: | Stand , Wall bracket |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- RISK OF SUFFOCATION! Improper use of this product can lead to suffocation, especially in children. Therefore, it is essential to follow the safety information below. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a suffocation risk! This product contains small parts that could be swallowed by children! There is a suffocation risk!
- Risk of electric shock! This device contains electronic parts powered by a power source (power supply and/or batteries). Improper use of this product poses a risk of electric shock. An electric shock can cause serious to fatal injuries. Therefore, be sure to follow the safety information below. Never leave children unsupervised when handling the device! The device must only be used as described in the instructions, otherwise, there is a risk of electric shock!
- Explosion risk! Improper use of this product poses an explosion risk. Be sure to follow the safety information below to avoid an explosion. Do not expose the device to high temperatures. Only use the recommended batteries. Do not short-circuit the device and batteries, or throw them into fire! Excessive heat and improper handling can cause short circuits, fires, and even explosions!
- Risk of material damage! Improper handling may damage the device and/or accessories. Therefore, use the device only according to the following safety information. Do not disassemble the device! In case of a defect, please contact your specialist dealer. They will contact the service center and may send the device for repair if necessary. Do not immerse the device in water! Do not expose the device to shocks, vibrations, dust, prolonged high temperatures, or extreme humidity. This may lead to malfunctions, short circuits, as well as damage to batteries and components. Only use the recommended batteries. Always replace weak or used batteries with a completely new set of fully charged batteries. Do not use batteries from different brands, types, or varying capacities. Remove batteries from the device when it is not used for an extended period.
- Risk of voltage damage! The manufacturer is not liable for voltage damage resulting from incorrectly inserted batteries!
Skip product gallery
Compatible Sensors
BRESSER Thermo-Hygro Sensor 433 MHz
€24.95*
Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen.
Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer.
This device is compatible with weather stations with the following article numbers:
14895
14993
14998
15004
15131
15243
15298
15405
15406
15407
15408
15409
15418
15479
15496
15652
16206
16207
7000012CM3000
7000012GYE000
7000013
7000023
7000027
7000029
7000030
7000060
7004200
7004200GYE000
7004200HZI000
7004200MGU000
7004200QT5000
7004210
7004330
7004340
7004350
7004360
7004370
7004380
7006500
7006510
7006511
7007201
7007350
7007402
7007403
7007404
7007511
7007520
7007610
7007620
9070600
9070700
9070710
9604101
9604200
9604210
7000012000000
7004200000000
FEATURES
Measures temperature and humidity
Easy-to-read LCD display
Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations
Maximum range of up to 80 meters
IP Protection Class: IP44Frequency: 433 MHz
Dimensions: 71 x 65 x 23 mm / weight: 44 g
Powered by 2x 1.5V AAA batteries (not included)
SCOPE OF DELIVERY
Thermo-Hygro Sensor
Instruction manual
Available
Skip product gallery
Spare Parts
Power supply 5V-1A (EU/UK) straight
€14.99*
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:14895149931500415013151301524370000237000027700003070025807002581700350070035107003600CM30007003600GYE0007003600QT500070043307004340700435070043607004370700438070063007006500700651070065117007201700735070075117007520700762079025807902581790350079035109070600907070090707107003600000000WSH4102
Available
Power supply 5V-1A (EU/UK) angled
€14.99*
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:14895149931499815004150131513015198151991524315418162691642716479165117000023700002770000307002541700258270025867003150700321070032207003240700335070033607003400700370070038007003900700433070043407004350700436070043707004380700440670065007006510700651170072017007350700751170075207007620790254179025867903210790322079033509070600907070090707109080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000
Available
Skip product gallery
Accessories
BRESSER Thermo-Hygro Sensor 433 MHz
€24.95*
Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen.
Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer.
This device is compatible with weather stations with the following article numbers:
14895
14993
14998
15004
15131
15243
15298
15405
15406
15407
15408
15409
15418
15479
15496
15652
16206
16207
7000012CM3000
7000012GYE000
7000013
7000023
7000027
7000029
7000030
7000060
7004200
7004200GYE000
7004200HZI000
7004200MGU000
7004200QT5000
7004210
7004330
7004340
7004350
7004360
7004370
7004380
7006500
7006510
7006511
7007201
7007350
7007402
7007403
7007404
7007511
7007520
7007610
7007620
9070600
9070700
9070710
9604101
9604200
9604210
7000012000000
7004200000000
FEATURES
Measures temperature and humidity
Easy-to-read LCD display
Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations
Maximum range of up to 80 meters
IP Protection Class: IP44Frequency: 433 MHz
Dimensions: 71 x 65 x 23 mm / weight: 44 g
Powered by 2x 1.5V AAA batteries (not included)
SCOPE OF DELIVERY
Thermo-Hygro Sensor
Instruction manual
Available
Skip product gallery
Customers also bought
BRESSER MeteoTemp BF Colour Weather Station
€49.99*
The BRESSER MeteoTemp BF colour weather station gives you a complete overview of all local weather data as well as indoor temperature and humidity readings. It features a weather forecast function, which displays weather symbols and upcoming trends to help you plan ahead. Temperature and humidity readings are taken by the built-in thermo-hygro sensor on the base station, as well as by the external wireless sensor. The base station features an intuitive touchscreen that gives you quick access to the alarm function, max/min display and other settings.
Feature-packed weather station with external sensor
The weather station also comes with a wireless sensor, which can be placed in your garden or on your balcony to measure the outdoor temperature and humidity. Based on these readings, the weather station automatically calculates the heat index and dew point.
The outdoor sensor can also be used indoors to monitor the indoor temperature and humidity in an additional room. The onscreen comfort indicator gives you an indication of how comfortable the indoor conditions are based on the humidity readings, and also displays the risk of mould (high, medium, low or none). What’s more, the weather station can be expanded with up to two additional thermo-hygro sensors (see BRESSER accessories).
Keep an eye on the local weather and your indoor climate with the feature-packed BRESSER MeteoTemp BF colour weather station!
BASE STATION FEATURES
Weather station with colour display and touchscreen
Weather forecast with symbols and trend
Indoor temperature and humidity with recent trend
Displays the outdoor temperature and humidity with recent trend
Comfort indicator
Mould warning function
Heat index and dew point
Temperature and humidity alarm
Min./max. value memory
Radio-controlled time and date (DCF)
Phases of the moon
Alarm with snooze function
3 channels
OUTDOOR SENSOR FEATURES
Wireless thermo-hygro sensor
Temperature and humidity (indoor or outdoor)
Built-in display for viewing measurements
Range: up to 80 metres
Battery operated: 2x AAA batteries each (not included)
Can be placed on a table or wall-mounted
SCOPE OF DELIVERY
Base station incl. power adapter
Outdoor sensor
Instruction manual
Available
%
BRESSER 5-in-1 Professional Weather Station with Colour Change
€89.00*
The new BRESSER Weather Station 5-in-1 COLOUR combines a compact design with an extensive information service in a very unique way. The small-sized multifunctional outdoor sensor is very place-saving and can be placed almost everywhere. A pipe clamp and screws to mount it to a pole (tube diameter about 25-33 mm) as well as a stand are already included!The 5-in-1 outdoor sensor transfers reliably the measured values for wind speed, wind direction, humidity, temperature and precipitation amount to the main station. On the clearly structured display of the main station not only current values but also numerous of historical data can be displayed. This allows for the internal saving and evaluation of the measured values over a period of 24 hours. From the collected data the weather station determines a very reliable local weather trend forecast for the next 12 hours, which is displayed on the screen by 6 graphical symbols.
For maximum and minimum values an individual alert can be programmed which gives both an acoustical as well as a light signal when the predetermined value is reached. For outdoor temperatures below -3 °C a specific alert can be activated as frost / ice warning.
A bad room climate often carries a health risk particularly for children and the elderly. The BRESSER 5-in-1 Weather Station provides a smart solution. The room climate indicator informs by means of symbols about the room climate.
Furthermore the BRESSER Weather Station 5-in-1 disposes of a radio controlled time and date setting (DCF time signal). Just a few minutes after switching on the weather station the current Central European Time and the date with weekday are automatically set. An alarm clock with snooze function are also part of the scope of features.
A new feature of this weather station is the colour change of the display when the outdoor temperature changes. So one can easily see from the colour of the display if it's weather for a jacket or a t-shirt.
FEATURES
changing display colour when temperature changes
8 display colours can be set manually
256 colours in the automatic mode
5-in-1 multifunctional outdoor sensor
mounting accessories for the sensor included
indoor temperature (°C/°F) and humidity
outdoor temperature (°C/°F) and humidity
wind directiont and speed
graphical weather trend (12 hours)
percipitation with history (day/week/month)
atmospheric pressure with history (24 hours)
heat index
dew point
radio controlled time and date setting
clock alarm
ice / frost warning
minimum / maximum memory (up to 24 hours)
LED background light, BTN colour display
SCOPE OF DELIVERY
main station with stand
5-in-1 outdoor sensor with mounting accessories
manual
Powered by 3x AA batteries (NOT included in delivery)
Available
%
BRESSER CO² Air Quality Monitor Smile
From
€44.90*
Endless meetings, urgent work emails, looking after the kids, cleaning the flat… during our hectic lifestyles, it's easy to forget about regular ventilation. Even though we know better: a high CO2 concentration can affect our health and wellbeing. The BRESSER CO2 air quality monitor Smile will show you when it's time to let some fresh air into your home or office. Simply have a quick look at the intuitive LCD display to keep an eye on the CO2 concentration, temperature and humidity. You don't need to worry about remembering what constitutes a critical carbon dioxide level - the intuitive graphical display with a linear scale and smiley face will show you the quality of the air in your surroundings. The measurements are precise, with high resolution and fast. Ventilation alarmThe practical carbon dioxide alarm reminds you when you need to let in some fresh air. If the default setting is different to your ideal indoor climate, you can configure your own limit up to a maximum of 5000 ppm. The alarm function can then be activated with a simple button press. If the preset limit is exceeded, the alarm will sound at a varying intensity depending on the CO2 concentration. The display will also show a flashing arrow symbol to remind you to open the windows. Humidity is also an important factor, as high humidity levels can cause mould to form. You can also set your own visual alarm for this reading so that you will know whether the air in the room is too dry or too moist. If you want to see more than just the current readings, there is also a practical memory function that displays the maximum and minimum values for the last 24 hours as well as the average values from the last 15 minutes and 8 hours for carbon dioxide concentration, temperature and humidity. The device is powered by a power adapter to enable continuous operation. The BRESSER CO2 Air quality monitor Smile - the perfect solution for busy fresh air fans! FEATURESSimultaneous display of CO2 concentration, temperature (°C / °F) and humidity Colour LCD display, clear and intuitive Graphical display of current CO2 concent Carbon dioxide alarm functions: Humidity alarm function Memory function High precision, high resolution, rapid response time Dimensions: 123 x 110 x 32 mm Powered by power adapter, long-term continuous operation possible DELIVERY CONTENTCO2 air quality monitor Power adapter Instruction manual
Available
Skip product gallery
Customers also viewed
BRESSER RC Weather Station Neomeo H
€44.95*
Colourful, clear, and precise – the BRESSER RC Weather Station Neomeo H provides all the essential meteorological data for the day. In addition to outdoor temperature and humidity, information about the indoor climate is also displayed on the attractive screen. Useful features like temperature and frost alarms, max/min value display, automatic time and date setting, and an integrated alarm clock make this weather station exceptionally functional. Weatherproof on the go with forecast and measurement data
Wondering if you need an umbrella or sunglasses today? The graphical weather forecast of the BRESSER Neomeo H Wireless Weather Station will help you decide. It also shows you the current outdoor temperature and humidity right outside your door. The temperature alarm for the outdoor sensor notifies you when your personal thresholds are reached. Additionally, the frost alarm will blink on the screen when the outdoor temperature is between -1 and +2.9 °C. Keep an eye on the indoor climate with the weather station
Whether at the office or at home, it's important to have the indoor climate just right. This means keeping track of the indoor temperature and humidity. The colourful weather station not only provides specific measurements but also displays a helpful indoor climate comfort indicator. The 24-hour max/min temperature and humidity readings can also help in preventing mould. Weather station with outdoor sensor for precise weather data
The range of the thermo-hygro outdoor sensor is impressive at up to 80 metres – enough to find the best spot for accurate measurements. The current data can be read directly on the LCD display at the sensor. Thanks to the IP44 protection class, the sensor is well-protected against the elements – a true professional among sensors.
Get your BRESSER RC Weather Station Neomeo H and enjoy precise indoor climate and weather updates!
BASE STATION FEATURES
Weather station with attractive colour display
Indoor temperature and humidity (°C/°F)
Displays outdoor temperature and humidity (°C/°F)
Graphical weather forecast
Indoor climate comfort indicator
Temperature alarm for outdoor sensor
Frost warning on the display
Displays 24-hour max/min temperature and humidity
Automatic DCF time and date setting, manual setting possible
Integrated alarm clock with snooze function
Power supply: mains adapter (included) and 3x AAA backup batteries (not included)
PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the manual time setting.
FEATURES SENSOR
Measures temperature and humidity
Clear LCD display
Range: up to 80 metres
IP protection class: IP44
Dimensions: 71 x 65 x 23 mm / Weight: 44 g
Battery-operated: 2x AAA batteries (not included)
SCOPE OF DELIVERY
Base station
1x wireless sensor
Mains adapter
Instruction manual
Available
BRESSER Weather Station MeteoTemp TBH
€39.90*
Will it rain today or stay sunny? The BRESSER Wireless Weather Station MeteoTemp TBH provides you with the answer in no time. The graphical weather forecast immediately shows you what the day has in store weather-wise. Thanks to the precise measurement of the outdoor temperature and humidity, you can easily decide whether you need a thick coat or a sun hat.
Optimise Indoor Climate with the Weather Station
A pleasant indoor climate is essential for our well-being and health. The base of the weather station, with its integrated thermometer and hygrometer, also checks the indoor temperature and humidity. With these measurements, you can always create the ideal comfort atmosphere in your home or office. One room not enough? Simply expand the system: up to two additional wireless sensors (not included) can be connected to the weather station.
Keep an Eye on Weather Highs and Lows
Interested in weather developments? Check out the air pressure history. The Max./Min. Value Memory additionally shows you the highest and lowest values for temperature and humidity. The individually adjustable temperature alarm is particularly practical: you’ll know immediately when your set limits are reached.
Powerful and Flexible: the Outdoor Sensor
The thermo-hygro wireless sensor of the weather station impresses with a range of up to 80 metres. This gives you plenty of freedom to perfectly place the water-repellent temperature and humidity sensor. And to ensure you can read the values directly at the measurement location, the sensor features an integrated display.
Get your own weather overview at home now – with the BRESSER Wireless Weather Station MeteoTemp TBH.
BASE STATION FEATURES
Indoor temperature and humidity (°C/°F)
Display of outdoor temperature and humidity (°C/°F)
Graphical weather forecast
Air pressure with graphical history
Max./Min. value memory for temperature and humidity
High/Low temperature alarm
Automatic time and date setting (DCF, manual setting possible)
Integrated alarm clock with snooze function
Moon phase
Up to 3 wireless sensors can be connected (1 sensor included)
Backlight
Battery level indicator
Power supply: power adapter (included) and 1x CR2032 backup battery (included)
PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the manual time setting.
SENSOR FEATURES
Measurement of temperature and humidity
Clear LCD display
Range: up to 80 m
IP rating: IP44
Dimensions: 71 x 65 x 23 mm / Weight: 44 g
Battery-powered: 2x AAA batteries (not included)
SCOPE OF DELIVERY
Base station
1x wireless sensor
Power adapter
1x CR2032 backup battery
User manual
Available
BRESSER MeteoTemp BF Colour Weather Station
€49.99*
The BRESSER MeteoTemp BF colour weather station gives you a complete overview of all local weather data as well as indoor temperature and humidity readings. It features a weather forecast function, which displays weather symbols and upcoming trends to help you plan ahead. Temperature and humidity readings are taken by the built-in thermo-hygro sensor on the base station, as well as by the external wireless sensor. The base station features an intuitive touchscreen that gives you quick access to the alarm function, max/min display and other settings.
Feature-packed weather station with external sensor
The weather station also comes with a wireless sensor, which can be placed in your garden or on your balcony to measure the outdoor temperature and humidity. Based on these readings, the weather station automatically calculates the heat index and dew point.
The outdoor sensor can also be used indoors to monitor the indoor temperature and humidity in an additional room. The onscreen comfort indicator gives you an indication of how comfortable the indoor conditions are based on the humidity readings, and also displays the risk of mould (high, medium, low or none). What’s more, the weather station can be expanded with up to two additional thermo-hygro sensors (see BRESSER accessories).
Keep an eye on the local weather and your indoor climate with the feature-packed BRESSER MeteoTemp BF colour weather station!
BASE STATION FEATURES
Weather station with colour display and touchscreen
Weather forecast with symbols and trend
Indoor temperature and humidity with recent trend
Displays the outdoor temperature and humidity with recent trend
Comfort indicator
Mould warning function
Heat index and dew point
Temperature and humidity alarm
Min./max. value memory
Radio-controlled time and date (DCF)
Phases of the moon
Alarm with snooze function
3 channels
OUTDOOR SENSOR FEATURES
Wireless thermo-hygro sensor
Temperature and humidity (indoor or outdoor)
Built-in display for viewing measurements
Range: up to 80 metres
Battery operated: 2x AAA batteries each (not included)
Can be placed on a table or wall-mounted
SCOPE OF DELIVERY
Base station incl. power adapter
Outdoor sensor
Instruction manual
Available
NATIONAL GEOGRAPHIC VA Colour RC Weather Station
€34.90*
The NATIONAL GEOGRAPHIC VA colour RC weather station shows you all important weather information at a glance. On the clearly arranged colour display you will not only find such information as indoor and outdoor temperature and humidity but also the exact DCF time which is received via radio transmission . For the UK the received EU DCF time signal can be offset by -1h automatically and the British time can automatically be seen wherever the time signal is received in the UK (southern England and parts of Wales). The current weekday and date are also displayed. The weather station also features a weather forecast for the upcoming 12-24h, air pressure display, alarm with snooze function and of course backlighting round out this multi function station. FEATURES BASE STATION LCD colour display Indoor temperature (°C/°F) and humidity from the integrated thermo-/hygrometer sensor Outdoor temperature (°C/°F) and humidity from the included Sensor Barometer display in hPa Display of time, date and weekday Time via DCF radio signal Weather Forecast Alarm function with two adjustable wake-up times and snooze function Maximum connectable sensors: 3 (1x included!) Hanging device and fold-out stand Power supply: Mains Adapter (incl.)FEATURES SENSOR Measurement of outdoor temperature (°C/°F) and humidity Hanging device and stand on the back 3 channels adjustable
range of 30 m Power supply: 2x AAA batteries (not included) SCOPE OF DELIVERY Weather station 1x outdoor sensor Instruction manual
Available
BRESSER Home Weather Station Cumulus
€79.00*
With the BRESSER Home Weather Station Cumulus, you'll always be ahead of the weather. It keeps you reliably informed with all the essential weather data for both indoors and out. Temperature, humidity, barometric pressure - everything's displayed clearly on the sleek screen, perfect for home, office or anywhere else.
Your daily weather briefing - wireless weather station with dependable forecasting
Warm jumper or light top? Sunscreen or brolly? One quick look at the graphical weather forecast gives you the answer instantly. The precise outdoor temperature and humidity readings show you exactly what conditions are like just outside. The weather indices for dew point and heat index, plus barometric pressure readings with trend charts, give you the complete weather picture.
Accurate readings for perfect indoor comfort
Overly dry air from the heating in the lounge, or too much moisture building up in the kitchen? The handy comfort indicator tells you at a glance whether your indoor climate is spot on. The stylish base station also monitors current room temperature and humidity using its built-in thermometer and hygrometer. The max/min memory function tracks daily highs and lows, so you know when it's time to open the windows.Alerts for effortless daily living
Feeling chilly at 19°C and reaching for the air con at 24°C? Simply set your comfort zone and the high/low weather alerts will let you know when temperatures go beyond your preferred range. It doesn't stop at temperature either - humidity and barometric pressure changes are automatically flagged up too. Especially useful on frosty winter mornings: the alarm with snooze function and built-in frost alert wakes you 30 minutes early when outdoor temperatures drop below -3°C. Plenty of time to layer up and clear the windscreen.
Bring home your personal weather assistant today - the BRESSER Home Weather Station Cumulus!
FEATURES BASE STATION
Stylish 5.7" true black colour display
Indoor temperature & humidity readings with comfort indicator
Outdoor temperature & humidity display
Graphical weather forecast
Barometric pressure with trend chart
Weather indices for heat index & dew point
Max/min memory function
High/low weather alerts for indoor/outdoor temperature & humidity, barometric pressure and optional sensor readings
Automatic time, date, day and moon phase via DCF signal (manual setting also available)
Alarm with snooze and frost alert
Expandable with up to 7 additional sensors (sold separately)
Power: Mains adapter (included), CR2032 backup battery (not included)
FEATURES SENSOR
Temperature and humidity readings
Range: up to 30 metres
Battery powered: 2x AA batteries (not included)
SCOPE OF DELIVERY
Base station
1x thermo-hygrometer sensor
Mains adapter
Instruction manual
Available
BRESSER Thermo-Hygro Sensor 433 MHz
€24.95*
Living room, bedroom and children's room, kitchen and of course the bathroom - all benefit from a regular room climate check to ensure optimal comfort. So, enhance your weather station with this BRESSER Thermo-Hygro Sensor, allowing you to monitor conditions at an additional location. The sensor sends data over a significant distance of up to 80 meters, instantly displaying it on your base station's screen.
Wondering if it's really that warm? The sensor includes an LCD display for immediate, on-site verification of current readings. This feature also enables this temperature and humidity meter to function as a standalone thermo-hygrometer.
This device is compatible with weather stations with the following article numbers:
14895
14993
14998
15004
15131
15243
15298
15405
15406
15407
15408
15409
15418
15479
15496
15652
16206
16207
7000012CM3000
7000012GYE000
7000013
7000023
7000027
7000029
7000030
7000060
7004200
7004200GYE000
7004200HZI000
7004200MGU000
7004200QT5000
7004210
7004330
7004340
7004350
7004360
7004370
7004380
7006500
7006510
7006511
7007201
7007350
7007402
7007403
7007404
7007511
7007520
7007610
7007620
9070600
9070700
9070710
9604101
9604200
9604210
7000012000000
7004200000000
FEATURES
Measures temperature and humidity
Easy-to-read LCD display
Functions as an independent solution, or as a replacement or supplementary sensor for select BRESSER weather stations
Maximum range of up to 80 meters
IP Protection Class: IP44Frequency: 433 MHz
Dimensions: 71 x 65 x 23 mm / weight: 44 g
Powered by 2x 1.5V AAA batteries (not included)
SCOPE OF DELIVERY
Thermo-Hygro Sensor
Instruction manual
Available
%
BRESSER MeteoCast Pico Weather Station
€19.99*
€24.90*
(19.72% saved)
With the BRESSER MeteoCast Pico Color Weather Station including thermo-hygro external sensor, you'll keep a cool head in any weather. The compact temperature and humidity meter with weather forecast shows you the current climate conditions indoors and outdoors. Additionally, the Max./Min. values are stored for your meteorological review.
Being prepared for any weather thanks to the weather forecast
Raincoat for rainy days, or rather a sun hat against the heatwave? With the MeteoCast Pico Weather Station with outdoor sensor, this question is answered in a flash. The device shows you a graphical weather forecast with 5 intuitively understandable symbols.
Measured directly on site – by the weather station with outdoor sensor
The weather station comes with a wireless sensor that combines thermometer and hygrometer. Once the perfect location is found up to 80 m away from the base station, it quickly sends the precise measurement data. Thus, outside temperature and humidity reliably appear on the base's display. Conveniently, the sensor itself has a small display, so you can read the values directly on site independently of the base station.
Always keep an eye on the indoor climate with the weather station
Indoors temperature and humidity are just as relevant as outdoors. Because a good indoor climate is important for our health and well-being. Therefore, the base station itself also acts as a temperature and humidity meter. This way, you can decide based on the specific measurement values whether and when the heating or air conditioning should start working.
Weatherproof start of the day – with the MeteoCast Pico Color Weather Station
If you want to utilize the full potential of the weather station, let the practical alarm function incl. snooze button start your day. A quick glance at the weather forecast and outdoor temperature quickly reveals where to look for the right outfit for the day inside the wardrobe. And to ensure you start the morning on time, the time is set automatically via the DCF time signal.
Keep an eye on the indoor and outdoor climate with the BRESSER MeteoCast Pico Color Weather Station.
BASE STATION FEATURES
Graphical weather forecast
Temperature (indoor/outdoor)
Humidity (indoor/outdoor)
Max./Min. value memory
Automatic time display via DCF signal
Built-in alarm clock with snooze function
Battery status display
Power supply: power plug (included) or 2x AAA batteries (not included)
OUTDOOR SENSOR FEATURES
Thermo-hygro wireless sensor
Temperature and humidity (indoor or outdoor)
With display for on-site reading of the measurement data
Range: up to 80 m
Battery operated: 2x AAA batteries (not included)
For table or wall mounting
SCOPE OF DELIVERY
1x Base station
1x Thermo-hygro external sensor
1x Power plug
User manual
Available
