BRESSER Wi-Fi Gateway El Niño for 5-in-1 and 7-in-1 sensors (Refurbished)

Whether it’s the washing machine in your basement or the dishwasher in the kitchen, old appliances are susceptible to water leaks. The BRESSER water detector triggers a 90 dB alarm tone when it detects a leak. If the sensor is connected to your BRESSER weather station, a symbol will also appear on the display of your base station, allowing you to take action before the water causes serious damage. Also a handy helper in aquaristics, where leaks occur frequently, for example when the sealing gasket on the external filter needs to be changed. This device is compatible with weather stations with the following article numbers: 151961519715198152011543915440156591626916508165117002610700262070032007003210700322070032307003240700352070038007903200790321079032209080700 FEATURES Water sensor for detecting water leaks Loud 90 dB alarm tone Range of up to 150 mCable length: approx. 140 cm 7 available channels Wireless and compact design Power supply: 2x AA batteries (not included) DELIVERY CONTENT Water detector Instruction manual

NOTE: This item is a used or returned product. This means: The item may show slight signs of use and the packaging may differ from the original packaging. Please note that refurbished items generally come with a 12-month warranty.With its 114-mm aperture, this telescope collects three times more light than a 76-mm telescope. Therefore, fainter objects become visible, and you can see more details of the moon and planets. Nevertheless, the telescope is very compact and sets up quickly, with no assembly required, so it can be transported to your favourite night-sky-observation location easily. Use is very intuitive, without compromising stability. The built-in accessory tray keeps the eyepieces handy, and the red-dot finder makes locating objects simple.Please note: Reflector telescopes with optical design “Newton” are very good for astronomical observing at the starry night sky. But these telescopes are not well usable for observing landscape and nature during daylight. Therefore we suggest refractor (lens) telescopes for landscape and nature observing. FEATUREScompact Dobson telescopeeasy to handle particularly for beginnersintegrated compassSCOPE OF DELIVERYtelescope2 eyepieces (6 mm, 20 mm)Barlow lens 2xmoon filterLED findersoftware

NOTE: This item is a used or returned product. This means: The item may show slight signs of use and the packaging may differ from the original packaging. Please note that refurbished items generally come with a 12-month warranty.BRESSER T-REX, an FFF 3D Printer with Twin Extruder technology takes 3D printing to a new level giving you endless printing possibilities. Print faster, print dual colours, have more material available for your print job and get quicker results. Our Twin extruder technology incorporates turbo cooling fans to cool down the filament material as it leaves the nozzle, greatly improving the final mould effect. The T-REX greatly increases successful dual colour and dual material prints. Durable leveling knobs - Leveling like a pro. Larger leveling knobs make it easier to get accurate leveling done whenever needed, providing comfort when working within the printing chamber. The 8.9cm intuitive LCD touch screen allows the user to quickly setup all necessary steps for printing. Its closed housing design not only makes it the perfect printer for PLA filament printing, but also ABS plastics can be printed. Whereby, the printer should not be used in closed rooms without proper air ventilation. The printer has been designed to be constructed of an all metal frame body. Simply install the dual extruders and you're ready to print out of the box with this extremely stable structure giving you high precision printing. The sturdy metal frame increases the stability of the printer’s movement. A metal platform support and 10mm guide rods allow for precise movement of the z-axis. Aerospace-grade aluminium alloy is used for the 6.3mm Build Plate providing excellent heat distribution and rigidity. Stylish. User Friendly. BRESSER T-REX is a stylish and user-friendly 3D printer. The metal frame is secured with injection-molded parts ensuring a solid foundation. Thoughtful design and details include a unibody top cover, external handles, wide opening front access door, durable leveling knobs, a touch control interface, and universal power supply for worldwide voltages requirement. The T-REX comes with EU and GB power plugs. Twin Extruder - more colours, more materials. Our extruder technology and the built in turbo cooling fans cool down the plastics as they leave the nozzle. T-REX greatly increases successful dual colour and dual material prints.  Higher Level of Precision.Top Tier Print Quality T-REX is reliable with excellent precision and professional quality. The sturdy metal frame increase the stability of the printer’s movement. A-metal platform support and 10mm guide rods allow for precise movement of the Z-axis. The build plate is made from 6.3mm aerospace-grade aluminum providing excellent heat distribution and rigidity. The fully enclosed printing chamber provides versatility in printing different materials. With all of these premium features, it is easy to attain high-quality prints repeatedly and reliably. FEATURES: Heated Build Plate LCD Screen with touch screen interface Enclosed design with Acrylic cover  Temperature control for various filaments Dual extruder- can print two-colour or two-materials Metal frame -- provides stability 6.5 mm non-deformation alloy build platform WiFi Connectivity for Cloud Printing Latest components used for higher level of performance and reliability  SPECIFICATIONS: Principle: FFF Max Build Size: 227×148×150mm Print Precision：0.1 -- 0.2 mm Extruder Temperature: 240℃ Max.Print Bed Temperature: 120℃ Layer Thickness： 0.05 -- 0.5mm Nozzle Diameter： 0.4mm Nozzle Flow Rate: 24cc/hr Filament Diameter: 1.75 mm Filament Compatibility: ABS、PLA、 Positioning Precision: XY:11 Microns ( 0.0004 in ), Z: 2.5 Microns (0.0001 in ) Printer Dimensions: 560×415×500 mm Net Weight: 14.8 KG Gross Weight: 21.5 KG Software: REX Print File Type: Input STL Input Power: 110V/220V SCOPE OF DELIVERY:T-REX 3D-Printer1kg PLA Filament white1kg PLA Filament blackUK and EU power adapterScraperUSB CableSD CardLanguage Interface: English, German, French, Polish, Spanish, Portuguese Support ( OS ): Windows XP/ Vista/7/8 Mac OS X

This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable. Compatible with the following devices:151971519815199156601626916421164271644416511700254170025827002586700261070026207003200700321070032207003230700324070033007003360700340070035007003510700370070038007003900700440679025417902586790320079032107903220790323079033007903500790351090806009080700WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm SCOPE OF DELIVERY Solar-powered outdoor sensor Mounting materials Base station is not included! Instruction manual

This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable.PLEASE NOTE: This outdoor sensor is only compatible with weather centres with item numbers 7002510, 7002511, 7002512 and 7002513 that have LOT number 1156743 or higher. You can check the LOT number on your unit as well as on the packaging. Compatible with the following devices: 15200 15201 15659 16410 7002510, LOT number 1156743 or higher 7002511, LOT number 1156743 or higher 7002512, LOT number 1156743 or higher 7002513, LOT number 1156743 or higher 7002525 7002550CM3000 7002550GYE000 7002550MGU000 7002550QT5000 7002571 7002580 7002581 7002585 7002590 7002610 7002620 7800004 7800006 7800008 7800011 7902510 7902511 7902512 7902513 7902525 7902550 7902551 7902552 7902580 7902581 7902585 9080500 9602510 7002550000000 WSX1001CM3LC1 WSX1001CM3LC2 WSX1001000000 PLEASE NOTE: This outdoor sensor is only compatible with weather centres with item numbers 7002510, 7002511, 7002512 and 7002513 that have LOT number 1156743 or higher. You can check the LOT number on your unit as well as on the packaging. FEATURES Replacement wireless sensor, transmits data to the WiFi colour weather centre Measures wind speed, wind direction, humidity, external temperature and precipitation Transmission frequency: 868 MHz Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Multifunctional external sensor Mounting materials No base station included Instruction manual

An exclusive Bresser designed weather station, the BRESSER 7-in-1 Weather Station ClimateScout RC Weather Station. A quick glance in the morning onto your BRESSER weather station gives you all the weather information you need for the day. Your current local outdoor temperature and humidity are shown as well as the current wind speed and direction. How much did it rain during the night? These and many others of the frequently asked weather questions are answered by a quick look onto the main station's display. Have you ever wondered why temperatures feel differently outside then you had imagined it would feel like? The new Feels Like Feature will help you with that. It takes the heat index or windchill into consideration and provides a calculated result to give you a much better indication of how the current weather actually feels outside. It sure beats running in and out and having to change clothing. The Wind Gauge has been optimized and now measures in 360° and 16 directional points, giving you very precise wind readings. Furthermore, the radiation shield has been upgraded to enhance the temperature and humidity sensor circulation. All in all this 7-in-1 complete set of weather station main unit and professional 7-in-1 weather sensor is the perfect weather station for those that want accurate and up to date information.  FEATURES (main unit):Clear professional display for time & full weather information Receive your local weather data via the 7-in-1 weather sensor via 868 MHz RF transmission frequency RCC time synchronization & automatic switch between standard and daylight saving time (DCF) For UK Users who can receive the European DCF time synchronization signal the time can be automatically received using the UK time offset functionBuzzer alarm clock with ice pre-alert function Display time, calendar, weekday & Moon phaseAble to set the moon phase display for Northern / Southern hemisphere Buzzer alarm clock with ice pre-alert function Indoor temperature (°C/°F) & humidity readings with comfort indication & trend Outdoor temperature (°C/°F) & humidity readings with trend Gust or Average wind speed (mph, m/s, km/h, knots), Beaufort & wind level Real time & dominant wind direction in 360° & 16-direction resolution UV index (0 – 16) Light intensity reading (Klux, Kfc, W/m2) Measure Rain rate, Hourly, Daily, Weekly, Monthly, Total rainfall (in/ mm) with indicator Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Barometric pressure in relative or absolute readings (hPa, inHg, mmHg) Weather index for outdoor feels like, heat index, wind chill, dew point readings Max / Min memory records & past 24hrs hourly record Hi / Lo alert setting (indoor/ outdoor temperature & humidity) Alert setting (weather index, High wind-speed, High daily rainfall & Pressure drop) Flashing indicator for Hi/Lo alert warning on the LCD display UV and light calibration 5 languages for weekday and wind direction display (EN/ DE/ FR/ ES/ IT) Amber backlight Long-range transmission up to 150m (450 ft.) Supports up to 3 pcs wireless extra sensors , for instance 7009999 Thermo-/Hygrometer Outdoor Sensor, Pool Sensor SP6001LC2000, or Soil Sensor SP60020LC2000 (Not included) Wall mount/ desktop usage Product size: Main unit: 180 x 136 x 23 mm (W x H x D) Display VA size: 125x77mm (W x H) Battery requirements: Main unit: 4x AA ; Sensor 3x AA  (Not included)FEATURES (7-in-1 SENSOR)Measurement of Outdoor Temperature and Humidity, Wind Speed and Direction, Rain Gauge, UV and Light Intensity MeasurementUp to 150 m transmission range using 868 MhZ transmission frequencyShould be placed in an unobstructed location so that sun and rain data can be used properlyCan be mounted on wall or post using the included adapterProduct size: Sensor: 344 x 394 x 136 mm (W x H x D) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.SCOPE OF DELIVERY1x Main Unit, additional main units can be purchased using the BRESSER item codes 7003110CM3000 (black housing), 7003110GYE000 (white housing), 700311QT5000 (grey housing)1x wireless 7-in-1 Professional Weather Sensor including mounting stand