Skip to main content Skip to search Skip to main navigation

BRESSER Wi-Fi TB 7-in-1 RC Weather Station

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
  • If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
  • The AC/DC adapter serves as a disconnecting device. - The device’s AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
  • CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
  • Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
  • The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery

Compatible Sensors

BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz. Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station.This device is compatible with weather stations with the following article numbers: 15659162691642116427164447002531700254170025717002582700258670026107002620700315070032007003210700322070032307003240700330070034007003500700351070035207003700700380070039007004406700630079025317902541790258079025817902585790258679032007903210790322079032307903300790350079035109080600908070090808007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2 Compatible with the following weather stations, but exclusively with firmware version V1.11 or higher (download available on the product page of the BRESSER homepage): 700258070025817002585WSX1001000000WSX1001CM3LC1WSX1001CM3LC2 FEATURES Temperature measuring Humidity measuring 7 channels settable RC frequency: 868 MHz Extra long radio range of 150 meters! Suitable for smarthome systems by Tuya Powered by battery; 2x AA (LR6) (not included!) SCOPE OF DELIVERY Remote sensor

Available

€34.95*
BRESSER Spa and Pool thermometer
Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. This device is compatible with weather stations with the following article numbers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loating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

€39.00*
BRESSER 7-in-1 Outdoor Sensor
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable. Compatible with the following devices:151971519815199156601642116427164441651170025417002582700258670026107002620700330070033607003400700350070035107004406780001179025417902586790323079033007903500790351090806007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre Measures the outdoor temperature and outdoor humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Transmission range of up to 150 metres Place in an unobstructed location in order to obtain accurate sunlight and rain data Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Wireless sensor Mounting materials Base station is not included! Instruction manual

Available

€119.00*
BRESSER 7-in-1 Outdoor Sensor with Adjustable Solar Panel
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable. Compatible with the following devices:151971519815199156601626916421164271644416511700254170025827002586700261070026207003200700321070032207003230700324070033007003360700340070035007003510700370070038007003900700440679025417902586790320079032107903220790323079033007903500790351090806009080700WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm SCOPE OF DELIVERY Solar-powered outdoor sensor Mounting materials Base station is not included! Instruction manual

Available

€169.00*
BRESSER 7-in-1 Outdoor Sensor with Solar-Assisted Battery Operation
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable. Compatible with the following devices:151971519815199156601626916421164271644416511700254170025827002586700261070026207003200700321070032207003230700324070033007003350700336070034007003500700351070037007003800700390070044067902541790258679032007903210790322079032307903300790335079035007903510908060090807007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Solar power for longer battery lifespan Range: up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 420 x 170 x 213 mm SCOPE OF DELIVERY Wireless sensor with installation material Base station not included! Instruction manual

Available

€149.00*
BRESSER Soil Temperature and Moisture Meter
This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. This device is compatible with weather stations with the following article numbers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ireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

€39.00*
BRESSER Precision Thermo-Hygro Sensor
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. This device is compatible with weather stations with the following article numbers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emperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

€34.95*
Skip product gallery

Compatible Base Stations

BRESSER Additional / Replacement Base Station for Weather Station 7003400
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 15199700254170025827002586700262070032007003210700322070032307003240700330070033607003400700350070035107003700700380070039007004406700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Weather station with 8” (20 cm) screen for detailed weather insights Displays accurate data from the 8-in-1 outdoor sensor (outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity, WBGT) WiFi connection for sharing local weather data on platforms like Weather Underground and Weathercloud Heat stress index with four alert levels Indoor temperature and humidity with trend indicators Indoor climate comfort indicator Weather forecast and barometric pressure readings Max./min. memory High/low alerts for all relevant parameters Automatic time and date synchronisation via the internet*** Moon phase, sunrise/sunset display Alarm clock with frost alert Easy setup and calibration via the WSLink app Power source: mains adapter (included), CR2032 backup battery (not included) SCOPE OF DELIVERYBase station with power adapter No outdoor sensor included! Instruction manual

Available

€89.00*
BRESSER Additional / Spare Base Station for Weather Station 15198
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 1519615197151987002541700258270025867002620 7003100CM3000 7003100GYE000 7003100HZI000 7003100QT50007003200700321070032207003230700324070033007003360700350070035107003520 7003600CM3000 7003600GYE000 7003600QT500070037007003800700390070063009080600908070070031000000007003600000000 WSH4102 WSX3001 WSX3001CM3LC1 WSX3001CM3LC2 WSX3001000000Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time. FEATURES BASE STATION 24-hour and 14-day local forecasts with temperature highs, lows and rain probability (via ProWeatherLife server) Large 10-inch (25.4 cm) colour display Wi-Fi connection for publishing data to ProWeatherLive and Weathercloud Internet-based visibility and cloud cover Precise measurements from the outdoor sensor (not included) Indoor temperature and humidity with comfort indicator Air pressure display Heat stress index Beaufort scale for wind strength Weather indices: feels-like temperature, heat index, dew point, wind chill Max/min memory Weather alerts via ProWeatherLive Time, date, weekday and moon phase Sunrise/sunset and moonrise/moonset times Backlight with automatic dimmer WSLink app for easy Wi-Fi setup, data calibration and firmware updates Power supply: mains adapter (included), 1x CR2032 backup battery (not included) SCOPE OF DELIVERY Base station Stand Power adapter

Available

€179.00*
BRESSER Additional / Replacement Base Station for Weather Station 7003300 from LOT No. 1605517 onwards
NOTE: This base station is compatible with BRESSER weather stations with item no. 7003300 AND LOT no. 1605517 and higher. You will find the item number and LOT number of your weather station printed on the back of the base station.Want to share your weather data with your immediate neighbours? Or do you need a replacement base station because your device didn’t survive the last house move or a wild game of tag with the kids? Whether as an extension or a spare part – get all the functions of your existing weather station with item number 7002530 back on screen in no time with this base station. FEATURES7.4-inch colour display for detailed time and weather information LC display contrast adjustment for different viewing angles Wi-Fi connection for publishing data on weather platforms such as AWEKAS, Weather Underground and Weathercloud Indoor temperature (°C/°F) and humidity with comfort indicator Display of outdoor temperature (°C/°F) and humidity UV index with UV level indicator Light intensity display Sunburn time display (min.) Wind speed display (gusts or average speed) Beaufort scale level (scale for classifying wind speed) Wind direction display (current and prevailing, based on 16 directions) Rainfall display (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Feels-like outdoor temperature Weather index for dew point, wind chill factor and heat index Min./max. value memory (up to 24 hours) High/low value alarm with flashing symbol on the display Alarm clock with ice/frost warning Time (internet time synchronisation), date, weekday and moon phase Sunrise and sunset Weather data calibration 3 display brightness levels: High / Low / Off 7 languages for weekday (EN/ DE/ FR/ ES/ IT/ NL/ RU) Supports firmware updates Security type: supports WPA3 encryption Supports one 7-in-1 wireless professional sensor Supports up to 7 additional wireless sensors (7009999, SP60010000000, SM60020000000) Dimensions: 202 x 138 x 38 mm / Weight: 510 g Power supply: mains adapter (included) and 3x AAA backup batteries (not included) Mounting: wall-mounted or stand SCOPE OF DELIVERY Base station No outdoor sensor included! Instruction manual

Available

€149.00*
BRESSER Additional / Replacement Base Station for the WSX3001 Professional Wi-Fi Weather Station
Would you like to view your weather data in an additional room? Are you looking for a gift to enable your neighbours to monitor your local weather? Or maybe the base station from your BRESSER Professional Wi-Fi Weather Station didn’t survive your recent move or your child’s latest tantrum? Whether you’re looking for an extension or a replacement, this base station will allow you to access all of your measurements on the large 20 cm screen. In addition to displaying the data from your 7-in-1 sensor (not included), it can also show the readings from up to 7 compatible additional sensors (not included). Share your weather data worldwide The base station can also be connected to online platforms such as Wundergound or Weathercloud so that you can share and access your weather data online. And with the German-language portal AWEKAS, you can integrate your measurements into your smart home system (configuration instructions: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/). Additional base station – monitor the indoor climate in another room If your existing base station is in the living room, you can place a second base station in the kitchen or your child’s bedroom to view your local weather data in an additional room. The base station features a built-in thermo-hygro sensor, which measures the ambient temperature and humidity and displays a smiley symbol to indicate the quality of the indoor climate. You can then take effective measures to prevent the risk of mould or dry air. The additional base station is also ideal as a bedside clock. It features a built-in backlight that can be dimmed or switched off completely to ensure you get a good night’s sleep. And so that you wake up on time, it also has a practical alarm with a snooze function, as well as a frost warning function that triggers that alarm 30 minutes earlier when the outdoor temperature drops below -3°C – plenty of time to ensure that you get to work or school safely. Access all the practical functions of your BRESSER Professional Wi-Fi weather station with this additional/replacement base station. FEATURES WiFi connection with internet time synchronisation and support for firmware updates Publish your weather data on Wunderground or Weathercloud Indoor temperature (°C/ °F) and humidity (%) Displays the outdoor temperature (°C/ °F) and humidity (%) Light intensity (Klux / Kfc / W/m²) Displays the current UV index, exposure level and recommended protection Displays the sunburn time (mins) based on the current UV level Wind direction and speed (m/s; km/h; Knoten; mph) Beaufort index (scale for measuring wind speed) Air pressure with 24-hour history (hPa/inHg/mmHg) Rainfall with history (day/week/month) Graphical weather forecast for next 12-24 hours Weather index (‘feels like’ function, dew point, heat index, wind chill factor) Trend indicator shows the weather trends for the next few minutes Visual comfort level indicator for room temperature and humidity Phases of the moon Sunrise and sunset times Alarm with snooze function (5 minutes) and ice/frost warning Weekday alarm Min./max. memory (up to 24 hours) LED backlight, amber-coloured Wall bracket and table stand Supports a 7-in-1 sensor and up to 7 indoor sensors (sensors are not included) Dimensions: 215 x 172 x 29 mm and weight: 639 g Power supply: Power adapter and 3x AAA batteries as backup batteries (batteries are not included) Integrated Wi-Fi transmission to AWEKAS Security protocol: supports WPA3 encryption for firmware version 1.09 and above DELIVERY CONTENT Base station with stand Power adapter Instruction manual

Available

€299.00*
NATIONAL GEOGRAPHIC Additional / Replacement Base Station for Weather Station 9080600
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 5.7'' colour display for detailed time and weather information Wi-Fi connection with internet time synchronisation Receives weather data from the 7-in-1 professional sensor (not included) and from the wireless thermo-hygro sensor (not included) via 868 MHz Publish your local weather station data on platforms such as Weather Cloud Displays time, calendar, day of the week, and moon phase Alarm function Ice/frost warning Indoor temperature (°C / °F) and humidity with comfort indicator Outdoor temperature (°C / °F) and humidity display UV level and light intensity display Gust and average wind speed display Wind direction display (based on 16 compass points) Rainfall display (hourly, daily, weekly, monthly, total) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure Feels-like outdoor temperature Weather index including dew point, wind chill, and heat index Min./max. value memory (up to 24 hours) Alarm with LED indicator Weather calibration 3 display brightness levels: High / Low / Off 7 language options for the day of the week Supports firmware updates Security type: supports WPA3 encryption from firmware version 2.0 Supports a wireless 7-in-1 professional weather sensor (not included) Supports up to 7 additional wireless sensors (not included – item no.: 7009999) Easy setup and updates via WSLink app SCOPE OF DELIVERY Base station Power adapter No outdoor sensor included! Instruction manual

Available

€119.00*
BRESSER Additional / Spare Base Station for Weather Station 7002586
Get clarity on the current wind and weather: You have purchased the BRESSER WiFi ClearView Weather Station and now know your local wind speed, wind direction, humidity, temperature, precipitation values, as well as UV level and light intensity. But where should you put the base station? In the living room, your whole family will benefit from being able to glance quickly at the clear 21 cm TRUE BLACK colour display. But wouldn’t it also be great in the bedroom, so that as soon as you’ve switched off the alarm you’ll know whether blue sky and sunshine await? With this additional BRESSER base station, you don’t need to decide on just one room. Simply connect to your 7-in-1 external sensor and you have immediate access to your measured values in another room. You can count on the usual functions whenever you need them, including reliable local weather trend forecasts for the next 12 hours, displayed as graphics, so know when to organize a spontaneous BBQ. In the winter months, the frost alarm will alert you when the external temperature falls below -3 °C: Caution, risk of black ice! You can also see the date, day of the week, time and moon phases so you have an idea of the ‘signs of the times’. Plus, for a more long-term view, the memory function stores historical measured data from the past 24 hours. Time to give your BRESSER WiFi ClearView Weather Station a breath of fresh air Are there early signs of mould formation in your bathroom? Is the air in your children’s bedroom too dry because of the central heating? The additional BRESSER base station allows you to respond to unusual situations like these with utmost flexibility, as two stations mean two separate measured results for indoor temperature, humidity and air pressure. Position the device in a critical location and the integrated sensor will measure the current room temperature, humidity and air pressure at that location. A graphical room climate indicator will alert you when the air is optimal, too dry or too damp. In addition, you can also set an independent maximum/minimum value alarm with audible and light signal on the additional station itself. On the road often? In addition to the base station at home, you can use the WiFi function to access your measured data through weather portals such as AWEKAS any time, anywhere. Or, use AWEKAS to transmit your data to your Smart Home controller. Risk more than just a glance— this BRESSER base station displays reliable weather data from your 7-in-1 external sensor at an additional location. FEATURES 8.3” colour display (19.3 x 9.3 cm) for detailed time and weather information WiFi connection with internet time synchronisation Receives weather data from the 7-in-1 external sensor and from the optional wireless thermo-hygro sensors on 868 MHz Suitable for publication of data on platforms such as AWEKAS, Weather Underground and Weather Cloud Integrated sensor for indoor temperature (°C/°F), humidity and air pressure External temperature (°C/°F), humidity, wind direction, wind speed, UV level and light intensity Precise wind direction display (16 directions) Graphical weather trend display (sunny, partly cloudy, overcast, rain, storm, snow) Beaufort index display (scale for measuring wind speed) Precipitation quantity display (hourly, daily, weekly, monthly, total precipitation) Room climate indicator Weather index display for dewpoint, windchill factor and heat index Time, calendar, day of the week and moon phase display Alarm function with snooze button Ice/frost alarm Min./max. memory (up to 24 hours) Alarm with LED indicator 3 different display brightness levels High/Low/Off 7 languages for days of the week Firmware updates supported Supports up to 7 additional wireless sensors (optional) (item no. 7009999) Integrated WiFi transmission to AWEKAS SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

€179.00*
BRESSER Additional / Spare Base Station for the Wi-Fi HD TFT Professional Weather Station 7003500
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 7-inch HD TFT display (17.8 cm) with versatile display modes Multi-channel overview showing live data from all wireless sensors Displays accurate readings from the 7-in-1 outdoor sensor (not included): (temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity) Seamless WLAN transmission to the AWEKAS weather portal (German interface) WLAN for sharing data on up to 3 platforms (Weather Underground, ProWeatherLive, Weathercloud, plus one additional) Graphical weather history (24 hours / 30 days) Historical data exportable to a USB drive (USB not included) Indoor temperature (°C/°F) and humidity, with trend tracking Beaufort scale for wind classification Detailed weather forecasts Air pressure monitoring Weather indices: feels-like temperature, dew point, wind chill, heat Daily and overall max/min memory Weather data calibration options Hi/Lo alarm settings for extreme conditions Custom labels for additional sensors Syncs with internet UTC time; time zone selection included Alarm clock with volume control and frost alert Time, calendar, weekday, and moon phase displays Sunrise/sunset and moonrise/moonset information Customisable display settings: light or dark mode Adjustable display brightness and contrast; day and night modes Supports six languages: English, German, French, Italian, Spanish, Dutch OTA and USB firmware updates Works with up to 7 sensors (not included, available separately) Mounting options: desktop stand or wall mounting Powered by mains adapter (included) and a CR2032 backup battery (not included) SCOPE OF DELIVERY Base station Power adapter No wireless sensorincluded! Instruction manual

Available

€229.00*
BRESSER Additional / Replacement Base Station for 7003510 MeteoChamp Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Large 17.8 cm (7-inch) HD TFT colour display with various display modes Multi-channel overviews for displaying all live data from the wireless sensors Publish your weather data via Wi-Fi on up to 3 weather platforms (ProWeatherLive, Weather Underground, Weathercloud / 1 additional user-defined platform) Measures the indoor temperature and humidity Displays the graphical weather trend (last 24 hours) Weather forecast Beaufort scale display (scale for classifying the wind speed) Air pressure Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Maximum/minimum value memory Trend display for all temperature and humidity measurements Historical data log, exportable to USB drive (not included) Individually configurable weather alarm for different measurements Weather data calibration Synchronization with Internet UTC time with time zone selection Displays the time, calendar, day of the week, moon phase, sunrise/moonrise, sunset/moonset times Built-in alarm with ice/frost alarm Choose between dark or light display Adjustable display brightness and contrast, day, auto dim and night modes (on/off time can be set individually) 7 selectable display languages (EN, DE, FR, IT, ES, NL, CZE) Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system) Supports up to 7 wireless sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter (included), CR2032 backup battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

€329.00*
%
BRESSER Additional / Replacement Base Station for the 7003230 8-Day 4CAST XL Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 8-day weather forecast (today and 7 following days) Extra large 48.3 cm (19”) colour display with slim bezel Wide-angle display for easy reading of measurements when wall-mounted Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

€359.00* €549.00* (34.61% saved)
%
BRESSER Additional / Spare Base Station for Weather Station 7003300 up to LOT No. 1599948
NOTE: This base station is compatible with weather stations with item no. 7003300 AND LOT no. up to 1599948. You can find the item and LOT number of your weather station printed on the back of the base station. Elegant and colourful: The additional base station allows you to view the data from your Wi-Fi comfort weather station in an additional room, such as a bedroom. The readings from your 7-in-1 outdoor sensor including outdoor temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity are transmitted wirelessly, giving your everything that you need to decide what to wear for the day. Built-in alarm The additional base station will help to give you a relaxing start to the day. It features a built-in alarm and a snooze button that silences the alarm to give you an extra few minutes in bed. The clock is synchronized automatically via the Internet to ensure that you won't be late to work. The modern LCD colour display can be viewed from any angle and shows you all relevant weather data including a weather forecast to help you decide what to wear for the day. The additional base station also displays a range of other useful data, including the perceived temperature, sunburn time, Beaufort level and historical data. Smart function for icy weather: Thanks to the built-in frost alarm, the alarm goes off 30 minutes earlier when the outdoor temperature drops below -3 °C. Create the perfect indoor climate with the additional base station In addition to the outdoor conditions such as rain, wind and sunshine, the indoor climate can have a big impact on our health and wellbeing. The base station features a built-in sensor that measures the room humidity and temperature and stores the maximum and minimum values. This helps you to take action to prevent excessively dry air in winter and stop mould from forming in rooms with a high humidity, such as the kitchen. An optimal indoor climate is indicated by a smiley face on the graphical comfort indicator. If the display shows a frowning smiley, this indicates that you need to take action to improve the indoor climate. Get a better overview of the weather and your indoor climate with the additional base station for your Wi-Fi Comfort Weather Station. BASE STATION FEATURES 7.4-inch colour display with detailed time and weather information LCD display with adjustable contrast for multiple viewing angles Wi-Fi connection for publication of data on platforms such as AWEKAS, Weather Underground and Weather Cloud Indoor temperature (°C/°F) and humidity with comfort indicator Displays the outdoor temperature (°C/ °F) and humidity UV index with UV level indicator Light intensity display Sunburn time display (in mins) Wind speed display (gusts or average wind speed) Beaufort scale display (scale for classifying the wind speed) Wind direction display (current and predominant, 16 directions) Precipitation quantity display (hourly, daily, weekly, monthly, total precipitation) Weather forecast (sunny, partly cloudy, overcast, rain, storm, snow) Atmospheric pressure display Perceived outdoor temperature Weather index for dewpoint, windchill factor and heat index Min./max. memory (up to 24 hours) High/low alarm with flashing symbol on the display Alarm with ice/frost warning Time (synced via the Internet), date, day of the week and moon phase Sunrise and sunset Weather data calibration 3 different display brightness levels High/Low/Off 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports 7-in-1 wireless sensor (not included) Supports up to 7 additional wireless sensors (not included) Dimensions: 202 x 138 x 38 mm / Weight: 510 g Power supply: Power adapter (included) and 3x AAA backup batteries (not included) Installation: Wall or stand DELIVERY CONTENT Base station Power adapter External sensor not included! Instruction manual

Currently not available

€117.00* €149.00* (21.48% saved)
Skip product gallery

Spare Parts

Grey Rain Funnel
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519915201165097002510700251170025127002520CM300070025257002550CM30007002550GYE0007002550MGU0007002550QT50007002580700258170025827002585700258670026207003100CM30007003100GYE0007003100HZI0007003100QT50007003150700330070034007003600CM30007003600GYE0007003600QT500070044067802520780258078031507803300908050090806007002520000000700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000

Available

€17.99*
Grey Wind Vane
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519915200152011650970025107002511700251270025137002520CM300070025257002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002582700258570025867002590700261070026207003100CM30007003100GYE0007003100HZI0007003100QT50007003150700330070034007003600CM30007003600GYE0007003600QT5000700440678025207802580780315078033009080500908060096025107002520000000700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000

Available

€17.99*
Black Wind Cups
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:15199152001520116268165097002510700251170025127002513700252570025317002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002582700258570025867002590700261070026207003100CM30007003100GYE0007003100HZI0007003100QT50007003150700330070034007003600CM30007003600GYE0007003600QT50007004406780258078031507803300908050090806009602510700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000

Available

€17.99*
Power supply 5V-1A (EU/UK) angled
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:14895149931499815004150131513015198151991524315418162691642716479165117000023700002770000307002541700258270025867003150700321070032207003240700335070033607003400700370070038007003900700433070043407004350700436070043707004380700440670065007006510700651170072017007350700751170075207007620790254179025867903210790322079033509070600907070090707109080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000

Available

€14.99*
Battery Compartment Cover with Rubber Ring for 5-in-1 sensors
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519915200152011650970025107002511700251270025137002520CM300070025257002550CM30007002550GYE0007002550MGU0007002550QT500070025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070034007003600CM30007003600GYE0007003600QT500070044067802520780258078031507803300908050090808007002520000000700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000

Available

€17.99*
Skip product gallery

Accessories

BRESSER Precision Thermo-Hygro Sensor
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. This device is compatible with weather stations with the following article numbers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emperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

€34.95*
BRESSER Soil Temperature and Moisture Meter
This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. This device is compatible with weather stations with the following article numbers: 151961519715198151991520115439154401565915660162691642116427164441647916508165117002541700258070025817002582700258570025867002610700262070031507003200700321070032207003230700324070033007003400700350070035107003520700370070038007003900700440670063007902541790258079025817902585790258679032007903210790322079032307903300790350079035109080600908070090808007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX1001000000WSX1001CM3LC1WSX1001CM3LC2WSX3001000000WSX3001CM3LC1WSX3001CM3LC2 FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

€39.00*
BRESSER Spa and Pool thermometer
Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. This device is compatible with weather stations with the following article numbers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loating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

€39.00*
Grey Rain Funnel
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519915201165097002510700251170025127002520CM300070025257002550CM30007002550GYE0007002550MGU0007002550QT50007002580700258170025827002585700258670026207003100CM30007003100GYE0007003100HZI0007003100QT50007003150700330070034007003600CM30007003600GYE0007003600QT500070044067802520780258078031507803300908050090806007002520000000700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000

Available

€17.99*
Skip product gallery

Customers also bought

BRESSER Precision Thermo-Hygro Sensor
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. This device is compatible with weather stations with the following article numbers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emperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

€34.95*
BRESSER Soil Temperature and Moisture Meter
This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. This device is compatible with weather stations with the following article numbers: 151961519715198151991520115439154401565915660162691642116427164441647916508165117002541700258070025817002582700258570025867002610700262070031507003200700321070032207003230700324070033007003400700350070035107003520700370070038007003900700440670063007902541790258079025817902585790258679032007903210790322079032307903300790350079035109080600908070090808007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX1001000000WSX1001CM3LC1WSX1001CM3LC2WSX3001000000WSX3001CM3LC1WSX3001CM3LC2 FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

€39.00*
BRESSER Spa and Pool thermometer
Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. This device is compatible with weather stations with the following article numbers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loating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

€39.00*
BRESSER 7-in-1 Weather Station Air-Mon
A breath of fresh air for fresh air enthusiasts, the BRESSER 7-in-1 Weather Center Weather Station Air-Mon merges locally measured weather data with current internet air quality values for your home, featuring a modern weather station with app and color display. Weather station with outdoor sensor for a complete meteorological overview Quickly mounted, the 7-in-1 wireless sensor in conjunction with the stylish base station including integrated thermo-hygrosensor and barometer, swiftly delivers accurate measurements. Look forward to local information about temperature, humidity, air pressure, wind speed, wind direction, precipitation, UV levels, and light intensity. For a broader weather outlook, just check the reliable 7-day forecast including maximum and minimum temperatures. Retrieve meteorological history through the max/min value memory. Fully connected – smart use of the Wi-Fi weather station Specific current air quality values appear via the Wi-Fi connection on the elegant color display. Not at home? Access all data via the intuitive ProWeatherLive App or through a web browser – anytime, anywhere! Breathe deeply again with the air quality monitor The air we breathe matters – protecting our health from pollutants around us is crucial. Therefore, the weather station displays the 6 most important pollutant values in your environment: carbon monoxide, nitrogen dioxide, sulfur dioxide, ozone, as well as fine particulate matter PM2.5 and PM10. And because these are many values, the AQI (Air Quality Index) provides a summarized assessment of the current air quality. Red, yellow, or green – the traffic light as a comfort indicator Is the air too poor for Sunday coffee on the terrace? The comfort level traffic light, available for each air quality factor, gives the answer. Conveniently, indoor temperature and humidity, as well as UV radiation, are also equipped with a traffic light indicator. This allows you to see at a glance the status of indoor climate and the likelihood of sunburn.Premium weather station with additional potential: the extensions In addition to its main functions, the weather station already includes useful features such as automatic time display, moon phases, and an alarm clock. A well-rounded package indeed. And there's more: The BRESSER weather station, with rain gauge, wind gauge, and more, can be tailored to your individual needs with optionally available additional sensors. Optional devices (not included) allow you to easily check, for example, the pool temperature, soil moisture in your flowerbed, or indoor climate in multiple rooms. A CO2 sensor (not included) and an HCHO/VOC sensor (not included) provide even more insights into local air quality. Browse through the compatible BRESSER accessories for individual extensions. Make the 7-in-1 Weather Center Weather Station Air-Mon the new centerpiece of your home. BASE STATION FEATURESWeather station with air quality monitor Wi-Fi connection for retrieving and sharing local data on platforms like ProWeatherLive, WeatherUnderground, and Weathercloud Display of internet data on local AQI (Air Quality Index) and the 6 key pollutants (PM2.5, PM10, NO2, SO2, O3, CO) Comfort level traffic light for air quality measurements, UV levels, and indoor climate Display of precise measurements from the 7-in-1 outdoor sensor (Outdoor temperature, humidity, wind speed, wind direction, precipitation, UV levels, light intensity) Indoor temperature (°C/°F) and humidity Current weather and 7-day forecast with max/min temperatures Air pressure Weather and air quality alert functions Weather data calibration Max/min value memory Time and date (internet time synchronization) Moon phase, sunrise and sunset Alarm clock with snooze function and frost warning Expandable with the following optional sensors for direct measurement on site: Up to 3x thermo-hygro, soil, and/or pool sensor (not included) 1x PM2.5/10 sensor (not included) 1x CO2 sensor (not included) 1x HCHO and VOC sensor (not included) Suitable for table or wall mounting Power supply: AC adapter (included), CR2032 backup battery (not included) 7-IN-1 OUTDOOR SENSOR FEATURESMeasuring temperature and humidity Measuring wind speed, direction, and precipitation Measuring UV levels and light intensity Solar panel for extending battery life Range: up to 150 m Power supply: 3x AA batteries (not included) SCOPE OF DELIVERYBase station 7-in-1 wireless sensor Power adapter Operating instructions

Available

€349.00*
BRESSER Researcher LCD Microscope
A digital microscope easily brings the microcosmos up on the screen. For a long time, these instruments were common only in the beginner's range. Now, the successful and proven Researcher series makes the step into the digital microscopy world and offers new options for microscopy in schools, for hobby or work. The optics and mechanics is the same as already well estabished in the Researcher Bino and Researcher Trino microscopes. Incuding 4 DIN objectives, Abbe condenser, coaxial fine focus and crosstable, the Researcher LCD is suitable for use in the microscopy hobby as well as in teaching or other work related applications. The highest magnification when using the 60x objective (compares to 600x on non digital microscopes) is high enough to view small microorganisms as microalgae, flagellates and bacteria. Other magnifications (20x, 100x oil) can be added later. The Researcher LCD is also compatible with our plan-achromatic objectives designed for 160mm optical tube length.The integrated, modern Sony camerasensor IMX206 with 16MP gives a brilliant image with good contrast on the monitor. The user can change settings and capture images and video conveniently with the touch screen. Images with 16MP and Full HD video can be stored directly on SD card (SD card not supplied). The microscope also has a HDMI connection, so the image is easily shown on a big monitor, TV, beamer or smartboard. The results can be shared with a bigger audience in lectures or teaching. FEATURESDigital microscope with integrated 7'' touchscreen 4 achromatic DIN objectives (RMS thread connection), parfocal length 45mm Objective magnifications of 4x, 10x, 40x, 60x (40x and 60x with specimen protection) Abbe condenser with iris diaphragm, fully adjustable and height adjustable High-contrast screen with natural colours, 1024x600px resolution Integrated Sony IMX206 camera sensor with 16MP HDMI port for connection to an external monitor SD card slot (supports up to 32GB, not included) USB port (for data transfer to SD card) SCOPE OF DELIVERYResearcher LCD Digital Microscope Set of 5 prepared slides and 5 blank slides Power adapter (EU) 5V 2A HDMI cable USB cable for transferring stored data to a PC Dust cover

Available

€499.90*
BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz. Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station.This device is compatible with weather stations with the following article numbers: 15659162691642116427164447002531700254170025717002582700258670026107002620700315070032007003210700322070032307003240700330070034007003500700351070035207003700700380070039007004406700630079025317902541790258079025817902585790258679032007903210790322079032307903300790350079035109080600908070090808007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2 Compatible with the following weather stations, but exclusively with firmware version V1.11 or higher (download available on the product page of the BRESSER homepage): 700258070025817002585WSX1001000000WSX1001CM3LC1WSX1001CM3LC2 FEATURES Temperature measuring Humidity measuring 7 channels settable RC frequency: 868 MHz Extra long radio range of 150 meters! Suitable for smarthome systems by Tuya Powered by battery; 2x AA (LR6) (not included!) SCOPE OF DELIVERY Remote sensor

Available

€34.95*
Skip product gallery

Customers also viewed

%
BRESSER Wi-Fi ClearView Weather Station with 7-in-1 Sensor
The new BRESSER WIFI ClearView Weather Station with 7-in-1 sensor offers a very comprehensive range of weather data. The multifunctional outdoor sensor can easily be installed with the included mounting accessories! The outdoor sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature, precipitation, as well as UV level and light intensity via 868 MHz frequency to the base station. The base station shows a large variety of current and historical local weather data on its 8.3'' TRUE BLACK colour display. The latter allows internal storage and evaluation of the measurement data over a period of 24 hours. A very reliable forecast for the upcoming 12h is calculated by your local weather data which will be displayed on the base station. The WIFI function allows users to share their local data via apps such as 'Weather Underground'' or ''Weather Cloud''. In addition, the WIFI function enables Internet Time Synchronization and firmware updates. An alarm can be individually programmed for maximum and minimum values, which triggers both an acoustic and a light alarm signal when the specified value is reached. For outside temperatures from -3°C, a special alarm can also be activated for frost/ice warnings. A poor indoor climate often poses health risks, especially for children and elderly people. The BRESSER WIFI ClearView Weather Station offers a smart feature for this. The indoor climate indicator informs about current indoor climate conditions by means of the room climate indicator. For all ''moon addicts'' the different moon phases are also displayed. An alarm clock with snooze function is also included in the range of functions. This station can also be connected to the mulitlingual portal AWEKAS* (*EU customers only) . Optionally you can transmit your weather data to AWEKAS or call up your weather data worldwide. Transfer data such as air temperature, humidity, soil temperature and humidity, pool water temperature to your smart home home control system. FEATURES8.3'' colour display (19.3 x 9.3 cm) for detailed time and weather information WIFIconnection Internet time synchronization Receives weather data from the 7-in-1 sensor and the wireless thermo-hygro sensor via 868 MHz Publish your local data from your weather station on platforms like 'Weather Underground'', ''Weather Cloud" and "AWEKAS*" (*EU customers only)Display of time, calendar, weekday and moon phase wake-up function Ice/Frost warning Interior temperature (°C / °F) Humidity with comfort display Outdoor temperature (°C / °F) Display of UV level and light intensity Display of gusts and average wind speed Wind direction (exact display based on 16 directions) Rainfall (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Perceived outdoor temperature weather index for dew point, wind chill factor and heat index Min/max value memory (up to 24 hours) Alarm with LED display Weather Calibration 3 different display brightness levels: High / Low / Off 7 languages for the weekday Support of firmware updates Security type: supports WPA3 encryptionSupport a wireless 7-in-1 sensor with 150 m transmission range (included) Supports up to 7 additional wireless sensors (optional) (Art.-No.: 7009999) Integrated WIFI transmission to AWEKAS* (*EU customers only) What's IncludedBase station Outdoor sensor 7-in-1 incl. mounting accessories Power supply unit and cable, batteries not included

Available

€199.00* €249.00* (20.08% saved)
BRESSER 11-Day 4Cast CV Wi-Fi Weather Station 7-in-1
With the BRESSER 11-Day 4Cast CV WiFi Weather Station 7-in-1 you’ll never find yourself left out in the cold by the weather again. The weather station, with 7-in-1 solar outdoor sensor, supplements the on-site data with plenty of practical information from the ProWeatherLive platform. A special highlight: the extensive weather forecast, with the outlook for the next 11 days and a detailed overview of the next 24 hours. Information on local visibility and cloud cover also helps passionate amateur meteorologists to keep a close eye on the weather. You’ll always be up to date, whenever and wherever you are – choose to view your data, incl. max./min. values, conveniently on the clear display of the weather station, in the ProWeatherLive app or in a web browser. Environmentally-friendly and user-friendly – weather station with solar sensor Quick to install and connect to the base station, the 7-in-1 wireless sensor reliably supplies data measured directly on site, including temperature, humidity, wind speed, wind direction, precipitation amount, UV level and light intensity. Meanwhile, the power of the sun ensures smooth operation via the large solar panel. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries as a back-up during installation and they will take care of the power supply. A comfortable indoor climate with the WiFi weather station Outdoors, the weather station puts in a great performance with anemometer and rain gauge as well as thermometer and hygrometer, UV and light sensors. What about the climate indoors? A thermo-hygro sensor has been integrated into the base station so that you can always keep an eye on the indoor temperature and humidity. The trend display, which can be called up directly on the display, is perfect for preventing excessively dry air or mould. Trends you will be able to see include development of the room climate, so that you can respond by introducing fresh air or by humidifying if you need to. In addition, with ProWeatherLife, you can receive notifications when the indoor temperature and humidity change, as well as important weather parameters. Optional extensions for your WiFi weather station Want to adapt your weather station to your needs? No problem! It comes with a range of optional extensions through the following additional sensors (not included): Optional thermo-hygro sensors for indoor climate Optional soil and pool sensors for the garden Optional water detector and lightning sensors Optional PM2.5/10, CO2 and HCHO+VOC sensors for air quality For the perfect extensions, browse our BRESSER accessories to see which additional sensors are compatible (not included). Stay up to date on your local weather and indoor climate easily, whenever and wherever, with the BRESSER 11-Day 4Cast CV WiFi Weather Station 7-in-1. BASE STATION FEATURES Graphic weather forecast for the next 11 days (today and next 10 days)/for 24 hours (now and next 23 hours) from the ProWeatherLife server 11-day forecast for maximum and minimum temperature, as well as average temperature and chance of precipitation from the ProWeatherLife server Local visibility and cloud cover via the ProWeatherLive server WiFi connection for publishing local weather data on ProWeatherLive and up to 2 other weather platforms (e.g. AWEKAS) Indoor temperature (°C/°F) and humidity with trend Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Trend graph for air pressure, precipitation, temperature (indoor/outdoor) or humidity (indoor/outdoor) on the display Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Wind gusts and average wind speed, Beaufort scale (wind speed scale) Sunburn time display Air pressure Set weather notifications via the ProWeatherLive server Maximum/minimum value memory Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm clock with frost alarm WSLink app for easy connection to WiFi and weather platform, weather data calibration and for firmware updates 7 languages for day of the week (EN, DE, FR, ES, IT, NL, RU) Supports additional optional sensors Power supply: Mains plug (included), CR2032 back-up battery (not included) FEATURES OF 7-IN-1 OUTDOOR SENSOR Measurement of temperature, humidity, wind speed, wind direction, precipitation quantity, UV level and light intensity Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included)Range: 150 mSize: 390 x 174 x 465 mm SCOPE OF DELIVERY Base station Solar-powered outdoor sensor Power adapter Instruction manual

Available

€299.00*
BRESSER Profi-WSC Wi-Fi Weather Station with 7-in-1 Sensor
Featuring a discreet and elegant design and a large 14.5 cm (5.7-inch) colour display, the BRESSER Profi-WSC Wi-Fi Weather Station with a 7-in-1 sensor blends in perfectly in any home. Weather enthusiasts will find a wealth of data to explore: the wireless sensor measures the local outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity. Practical and eco-friendly: The outdoor sensor is also equipped with a solar panel to prolong the battery life. Quick startup with the WSLink app The WSLink app simplifies the configuration of your Wi-Fi weather centre so that you can access your local weather measurements as quickly as possible. With the app, you can configure the Wi-Fi connection, time server and weather data calibration for your weather station in a few simple steps. If you want to share your weather measurements online and access them remotely, the weather station can be connected to compatible weather platforms. The popular portals Weather Underground and Weathercloud can be added directly from the WSLink app. An additional provider – such as the German-language portal AWEKAS – can also be added. Wi-Fi weather station – feature-packed base station for monitoring the weather In addition to displaying the measurements from the outdoor sensor, the base station also features a number of other useful functions for keeping track of the weather. These include a weather forecast and the feels-like temperature, which will point you to the right side of your wardrobe. And if you want to know how strong the wind is blowing, you will find data on gusts, average wind speed and the current wind speed on the Beaufort scale. The base station also displays the current air pressure, as well as a trend indicator that can be used to draw conclusions about the latest meteorological developments. Indoor climate and more – your everyday assistant The indoor temperature and humidity are also important for our wellbeing. The weather station comes with a built-in hygro-thermo sensor and a trend indicator that alerts you to changes in your indoor climate. Not sure when to open the window? The high/low alarm for indoor/outdoor temperature and humidity can help you to prevent mildew and excessively dry air. The weather station can also alert you when it detects high wind speeds, heavy rainfall and steep drops in air pressure. If you’re passionate about meteorology, you’re probably keen to keep up to date with the latest weather trends. The maximum/minimum memory will help you to do just that. Keep track of the time: the weather station also displays the time, date, day of the week and moon phase. And thanks to the built-in alarm with a snooze function, you won’t need to worry about waking up late. The BRESSER Profi-WSC Wi-Fi Weather Station with a 7-in-1 sensor – take a wide range of local weather measurements and share and access them online! BASE STATION FEATURES Weather station with large 14.5 cm (5.7-inch) colour display Displays precise measurement data from the 7-in-1 outdoor sensor (Outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity) Share local weather data via Wi-Fi on the Weather Underground and Weathercloud platforms, as well 1 additional user-defined platform Indoor temperature (°C/°F) and humidity with trend display Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Weather forecast Air pressure with trend display and pressure change indicator Min./max. value memory High/low alarm setting for indoor/outdoor temperature and humidity Alarm setting for high wind speed, rainfall and drop in pressure Flashing display for high/low alarm on the LCD display Time, calendar, day of the week and moon phase display Built-in alarm with snooze function Synchronises the UTC time via the Internet, summer/winter time function (auto/on/off) WSLink app for easy configuration of Wi-Fi connection, time server, weather platform and weather data calibration LCD display with adjustable contrast for multiple viewing angles 3 brightness settings for the display: High/low/off 7 languages for day of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates (via WSLink app) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter, CR2032 back-up battery (not included) Dimensions: 190 x 113 x 20 mm OUTDOOR SENSOR FEATURES Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Solar power for longer battery lifespan Range: Up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 390 x 217 x 165 mm DELIVERY CONTENT Base station Wireless sensor Power adapter Instruction manual

Available

€239.00*
%
NATIONAL GEOGRAPHIC Smart Tuya Weather Station with 7-in-1 Sensor
The NATIONAL GEOGRAPHIC Smart Tuya Weather Station with 7-in-1 Sensor integrates seamlessly into your existing Tuya smart home to make everyday life easier. Once set up, it can trigger other Tuya devices (not included) in your home as needed. Additionally, the reliable weather forecast and extensive data on air pressure, temperature, precipitation, air quality, and more keep you well-informed at all times. Furthermore, the bar charts provide all the important information about weather developments at a glance. Your weather station, your rules – with the smart home weather station With Tuya Smart Home integration, the home weather station becomes part of a versatile network in no time. Connect the device to your existing system with other compatible devices, which can then be conveniently controlled via the Tuya Smart Life App. This allows you to easily set up smart scenarios based on current weather conditions. Is your comfortable temperature falling below the desired level in the living room? Then have the heating automatically turn on. Conveniently, with the weather station with app, you can access all data anytime and anywhere. Climate data with solar power – the smart weather station Making precise weather foresight easy: Measure outdoor temperature, humidity, wind speed and direction, precipitation, UV level, and light intensity in your surroundings – all thanks to the efficient 7-in-1 outdoor sensor. The movable solar panel ensures eco-friendly power supply. Only when necessary does the sensor of the professional weather station rely on a battery backup. And with the integrated thermo and hygrometer sensor in the base, you can also keep an eye on the indoor climate. Breathe in, breathe easy: weather station with air quality monitor Always know what's in the air: The smart weather station displays internet data on air quality on the screen, such as the air quality index and various pollutant values. Want to measure on-site? Then easily expand the professional weather station with optional sensors. This way, you can directly detect and display data like PM2.5/10, CO2, HCHO, and VOC. Look forward to smart climate technology for your home – with the NATIONAL GEOGRAPHIC Smart Tuya Weather Station with 7-in-1 Sensor. FEATURES BASE STATION Smart weather station controllable via the Tuya Smart Life App Can trigger other Tuya smart devices Measurement of indoor temperature and humidity Weather forecast and air pressure measurement Room climate comfort indicator Display of precise measurement data from the 7-in-1 solar outdoor sensor (outdoor temperature and humidity, wind speed/direction, precipitation, UV level, light intensity) Bar chart for air pressure, precipitation, indoor/outdoor temperature & humidity Display of internet data on air quality (air quality index (AQI), PM2.5, PM10, CO2, CO, HCHO, VOC) High/low value alarm Max./min. value memory WiFi connection to publish local weather data on online platforms like Weather Underground and Weathercloud Automatic time and date display*** Integrated alarm clock Display of moon phase, sunrise/sunset Expandable with the following optional sensors for display on the screen and in the Tuya App: Up to 3x thermo-hygro, soil, and/or pool sensors (not included) Up to 3x water detectors 1x PM2.5/10 sensor (not included) 1x CO2 sensor (not included) 1x HCHO and VOC sensor (not included) Power supply: mains adapter (included), CR2032 backup battery (not included) *** PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the manual time setting.FEATURES 7-IN-1 OUTDOOR SENSOR Measurement of temperature, humidity, wind speed, wind direction, precipitation, UV level, and light intensity Operates via large movable solar panel Operates on 3x AA batteries (not included) in low sunlight Range: up to 150 m Dimensions: 390 x 174 x 465 mm SCOPE OF DELIVERY Base station incl. mains adapter 7-in-1 wireless sensor Instruction manual

Available

€179.00* €269.00* (33.46% saved)
BRESSER 6-day 4CAST PRO SF 7-in-1 Wi-Fi Weather Station with Solar-powered Sensor
Stay on top of the weather with the BRESSER 6-day 4CAST PRO SF 7-in-1 Wi-Fi weather Station with a solar-powered sensor! The weather station displays a 6-day weather forecast with maximum/minimum temperature readings, and also tells you the chance of rain. It also features a 10-inch colour display, which ensures that all the weather stats are easy to read. The modern Wi-Fi weather station with a solar-powered sensor obtains the forecast data via the Internet from the ProWeatherLive platform. In addition to the weather forecast, the weather station also displays the local visibility and cloud cover. Eco-friendly weather station with solar-powered sensor, ideal for amateur meteorologists The weather station comes with a solar-powered outdoor sensor, which is powered by solar energy and measures temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity. Simply align the large solar panel with the sun according to your location. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries (not included) as a back-up during installation, and they will take care of the power supply. All the measurements will appear on the screen of the base station, which can be located up to 150 metres away. Wi-Fi weather station with feature-packed base station The base station of the 6-day 4CAST PRO SF weather station features a stylish design and displays the data received from the solar-powered sensor. It also takes its own readings via the built-in thermo/hygro sensor, which measures the ambient indoor temperature, humidity and air pressure. Together with the maximum/minimum memory, this enables you to keep an eye on the indoor climate and effectively prevent mildew and excessively dry air. Outdoor temperature, precipitation and more – you can also view the maximum/minimum readings for the other measurements made by the solar-powered sensor. Share weather data and use it with your smart home Access the measurements from your solar-powered sensor remotely and share them with others: with a few clicks, you can send your weather station data to the ProWeatherLive platform. If you have a smart home, you can also make use of the German-language portal AWEKAS, which allows you to transfer measurement data from the solar-powered sensor to your smart home system free of charge. Simply follow the link below to set up the weather station for your smart home system: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ Never lose track of time In addition to its elegant, contemporary design, the 4CAST PRO SF Wi-Fi weather station allows you to keep track of the time, date, day of the week and moon phase via the large display. For people who enjoy watching the sunset or observing the moon, the weather station also displays the sunrise/moonrise and sunset/moonset times.  Solar-powered weather data: Stay informed of the weather with the BRESSER 6-day 4CAST PRO SF 7-in-1 Wi-Fi weather station with a solar-powered sensor! BASE STATION FEATURES 6-day weather forecast (today and 5 following days) Large 10” colour display with stylish design Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) Dimensions: 219 x 200 x 26 mm FEATURES OF 7-IN-1 OUTDOOR SENSOR Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm DELIVERY CONTENT Base station Solar-powered outdoor sensor Power adapter Instruction manual

Available

€319.00*
%
BRESSER 7-in-1 Exclusive Weather Station ClimateScout RC
An exclusive Bresser designed weather station, the BRESSER 7-in-1 Weather Station ClimateScout RC Weather Station. A quick glance in the morning onto your BRESSER weather station gives you all the weather information you need for the day. Your current local outdoor temperature and humidity are shown as well as the current wind speed and direction. How much did it rain during the night? These and many others of the frequently asked weather questions are answered by a quick look onto the main station's display. Have you ever wondered why temperatures feel differently outside then you had imagined it would feel like? The new Feels Like Feature will help you with that. It takes the heat index or windchill into consideration and provides a calculated result to give you a much better indication of how the current weather actually feels outside. It sure beats running in and out and having to change clothing. The Wind Gauge has been optimized and now measures in 360° and 16 directional points, giving you very precise wind readings. Furthermore, the radiation shield has been upgraded to enhance the temperature and humidity sensor circulation. All in all this 7-in-1 complete set of weather station main unit and professional 7-in-1 weather sensor is the perfect weather station for those that want accurate and up to date information.  FEATURES (main unit):Clear professional display for time & full weather information Receive your local weather data via the 7-in-1 weather sensor via 868 MHz RF transmission frequency RCC time synchronization & automatic switch between standard and daylight saving time (DCF) For UK Users who can receive the European DCF time synchronization signal the time can be automatically received using the UK time offset functionBuzzer alarm clock with ice pre-alert function Display time, calendar, weekday & Moon phaseAble to set the moon phase display for Northern / Southern hemisphere Buzzer alarm clock with ice pre-alert function Indoor temperature (°C/°F) & humidity readings with comfort indication & trend Outdoor temperature (°C/°F) & humidity readings with trend Gust or Average wind speed (mph, m/s, km/h, knots), Beaufort & wind level Real time & dominant wind direction in 360° & 16-direction resolution UV index (0 – 16) Light intensity reading (Klux, Kfc, W/m2) Measure Rain rate, Hourly, Daily, Weekly, Monthly, Total rainfall (in/ mm) with indicator Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Barometric pressure in relative or absolute readings (hPa, inHg, mmHg) Weather index for outdoor feels like, heat index, wind chill, dew point readings Max / Min memory records & past 24hrs hourly record Hi / Lo alert setting (indoor/ outdoor temperature & humidity) Alert setting (weather index, High wind-speed, High daily rainfall & Pressure drop) Flashing indicator for Hi/Lo alert warning on the LCD display UV and light calibration 5 languages for weekday and wind direction display (EN/ DE/ FR/ ES/ IT) Amber backlight Long-range transmission up to 150m (450 ft.) Supports up to 3 pcs wireless extra sensors , for instance 7009999 Thermo-/Hygrometer Outdoor Sensor, Pool Sensor SP6001LC2000, or Soil Sensor SP60020LC2000 (Not included) Wall mount/ desktop usage Product size: Main unit: 180 x 136 x 23 mm (W x H x D) Display VA size: 125x77mm (W x H) Battery requirements: Main unit: 4x AA ; Sensor 3x AA  (Not included)FEATURES (7-in-1 SENSOR)Measurement of Outdoor Temperature and Humidity, Wind Speed and Direction, Rain Gauge, UV and Light Intensity MeasurementUp to 150 m transmission range using 868 MhZ transmission frequencyShould be placed in an unobstructed location so that sun and rain data can be used properlyCan be mounted on wall or post using the included adapterProduct size: Sensor: 344 x 394 x 136 mm (W x H x D) SCOPE OF DELIVERY1x Main Unit, additional main units can be purchased using the BRESSER item codes 7003110CM3000 (black housing), 7003110GYE000 (white housing), 700311QT5000 (grey housing)1x wireless 7-in-1 Professional Weather Sensor including mounting stand
Colour

Available

€129.00*
BRESSER Wi-Fi Comfort Weather Station with 7-in-1 Professional Sensor and Modern Colour Display
With its colorful display and elegant design, the BRESSER WiFi Comfort Weather Station with 7-in-1 professional sensor offers you a perfect overview of time and weather. Through the LCD display contrast setting, you succeed in reading the time, the day of the week, the phases of the moon, the sunrise as well as the sunset, on the 7.4" color display from almost any viewing angle. The 7-in-1 professional outdoor sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature, precipitation amount, as well as UV level and light intensity via 868 MHz frequency to the base station. Through the internal storage and analysis of the measurement data, a reliable local weather trend forecast for the coming 12 hours is displayed using graphical symbols. An extra alarm can also be activated for frost/ice warning. The WiFi function allows users to share their local data via weather platforms such as ''Weather Underground'' or ''Weather Cloud''. In addition, the WiFi feature enables internet time synchronization, as well as firmware updates. This station can also be connected to the German language portal AWEKAS. Optionally, you can transfer your weather data to AWEKAS or retrieve your weather data there worldwide. Transfer, among other things, data such as air temperature, humidity, soil temperature and humidity, pool water temperature to your smart home control. This is possible without any problems and free of charge via our partner AWEKAS. Under the following link this can be set up: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/FEATURES7.4'' color display for detailed time and weather informationWiFi connection with internet time synchronizationLCD display contrast adjustment to accommodate different viewing anglesPublish local data generated by your weather station on internet platforms such as "AWEKAS", ''Weather Underground'' and ''Weather Cloud''Display time, calendar, day of the week and moon phaseIce / frost warningIndoor temperature (°C / °F) and humidity with comfort displayOutdoor temperature (°C / °F) and humidity displayDisplay of UV level and light intensityDisplay of wind speed and wind direction (exact display based on 16 directions)Precipitation amount (hourly, daily, weekly, monthly, total rain)Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy)Atmospheric pressure displaySensed outdoor temperatureWeather index for dew point, wind chill factor and heat indexMin. - /Max. value memory (up to 24 hours)3 different display brightness levels: High / Low / Off7 languages for day of the week (EN/ DE/ FR/ ES/ IT/ NL/ RU)Supports firmware updatesSecurity type: supports WPA3 encryptionSupports one 7-in-1 wireless professional sensorSupports up to 7 additional wireless sensors (7009999, SP60010000000, SM60020000000) Dimensions: 202 x 138 x 38 mmSCOPE OF DELIVERYBase station7-in-1 professional sensorPower supply

Available

€249.00*