BRESSER Wide field eyepiece 15x/16 (30mm) with diopter setting

The zoom stereo microscope BRESSER Advance ICD is suitable for a wide variety of objects. Because of the Greenough design with two tilted objectives, you can view the sample in 3D. The three-dimensional view is also very helpful when working under the microscope, e.g. when soldering, dissecting or preparing a sample.The precise zoom enables you to view your sample in a wide range of magnifications from 1x to 4x (zoom ratio 4.0). When zooming, only slight refocussing is necessary. To do this, the Advance ICD microscope is equipped with a very precise, coaxial coarse and fine focus. The fine focus is especially helpful when using high magnifications or for imaging. When doing focus stacking with our MikroCam cameras (optional) the fine focus is also a big help.The interpupillary distance of the eyepiece pair is adjustable. Both eyepiece holders are equipped with diopter adjustment, which allows users with bad eyesight to compensate up to 8 dpt. difference between left and right eye. The 10x wide field eyepieces have field number (FN) 22 and are equipped with soft rubber eyecups. The microscope head can be moved on the long rod of the stand, which allows you to observe big samples up to a size of 22 cm.The angle of the bright LED reflected light illumination can be adjusted as necessary. The extra bright and even LED transmitted light provides a flat background when viewing transparent samples. The switch allows you to select reflected light, transmitted light or a combination of both to match your requirements. Brightness is adjustable with the dimmer. The bright light does not heat up, which allows you to observe also living specimens over a longer period of time. The long lasting LED is powered by a 5V AC adapter (EU/UK). The power cable comes with a USB plug.Fully equipped, the Advance ICD covers an exceptionally wide range of magnifications and is therefore suitable for a variety of tasks. Besides the included 2x lens there is also a selection of other auxiliary objectives available. With these, you are able to adjust magnification, working distance and depth of focus according to your needs.Magnifications in basic setting (no optional accessories):10x eyepieces: 10x – 40x10x eyepieces plus 2x auxiliary lens: 20x – 80x20x eyepieces: 20x – 80x20x eyepieces plus 2x auxiliary lens: 80x – 160x(other magnifications are possible when using other auxiliary lenses and/or eyepieces)The third tube is designed to permanently attach a camera. The image of the left eyepiece is diverted to the camera port with a lever/switch. We supply a selection of camera adapters for DSLR, mirrorless cameras and c-mount microscope cameras. This enables you to attach virtually any camera body as long as you have a model with interchangeable lens.APPLICATION RANGEQuality control in industryMaterials scienceLaboratoryBotany, gardening, farmingHydrology, aquaculture, fishkeepingInsects, Entomology, pest controlPlant physiology, raw food materials, medicinal herbsSchools, teachingFEATURESTrinocular head with 2 eyepieces and camera port with switchCompatible with BRESSER MikroCam cameras and others1x-4x stereo-zoom head2x auxiliary lensDiopter adjustment on both eyepiece holdersAdjustable interpupillary distance (52 – 72 mm)Bright LED light (reflected / transmitted)2 different object plates for best contrastView samples of up to 22 cm heightAC adapter Euro/UK (5V / 1000 mA) with USBHeavy build with metal standIncludes 2 pairs of widefield eyepiecesSCOPE OF DELIVERYMicroscope2 pairs of eyepieces (WF 10x / WF 20x)2x auxiliar lens (1 pcs)1 pair of rubber eyecupsObject plate 94 mm (black / white)Glass object plate 94 mm (matte)AC adapter Euro/UK (5V / 1000 mA)Dust coverPrinted manual

Slides and cover glasses are an indispensable accessory which has also impact on the image quality. For most biological microscopes, the cover glass thickness is an important optical parameter, which is therefore included in the optical design and, if so, printed on the sleeve of every objective. You can usually see the number 0.17 which is the thickness in millimeters. For demanding applications in the laboratory, or for microphotography, using cover glasses with the desired thickness and high quality is necessary.The cover glasses included in the set are made of Boro 3.3 glass and are standardized to a thickness of 0.16-0.19mm. So they match the desired 0.17mm really good and give the best possible image quality. These Boro 3.3 cover glasses are pure white, without streaks and are pre-cleaned and ready to use. They are also especially suitable for fluorescence microscopy.The slides are made of soda lime glass, and have ground edges for safe handling. They have a matte field for writing on both sides (top and bottom). Slides and cover glasses are packed separately and in a vacuum sealed bag, containing moisture absorbent. They can be stored for a long time without loss of quality from hydrolysis and are easy to take out.

The immersion oil is used as a medium to get focus with a 100x oil objective. Without this oil it's not possible to get a sharp image.Volume: 5 ml

The BRESSER Science photo adapter (2.5x/4x) is used to connect an SLR camera or system camera to a trinocular BRESSER Science microscope.  The camera adapter is for the following microscopes: 5750600 BioScience Trino 5760100 Science TRM-301 5770200 Science ADL-601 P 5770500 Science ADL-601F 5780000 Science MPO-401 5790000 Science IVM-401 5807000 Science MTL-2015806300 Science ETD-301 Additionally a specific T2-Ring is necessary for the camera. SCOPE OF DELIVERYPhoto-adapter 2,5x/4x 

The BRESSER MikroCamII microscope cameras help to make photos and videos with a microscope very easy. The modern Sony® CMOS sensors give brilliant colours with very low noise and is the perfect choice for any application where true natural colours are important. The included imaging software has multiple adjustments for the capture of still images and videos. The integrated measuring* routine allows for a measurement in the camera live image. The software can be operated in the following languages: German, English, French, Polish, Russian, Turkish, Chinese. The camera housing includes the c-mount adapter thread. For use with 23.2 mm adaptations, we recommend the optional, variable 0,5x reducer (item no. 5914005). For special applications, the camera can also be mounted using the 1/4'' camera tripod thread. The BRESSER MikroCamII are equipped with a USB 3.0 port, compared to the MikroCam SP. This enables up to 8 times faster data transfers to the PC compared with the USB 2.0 standard. The camera is able to deliver more than 25 frames per second (depending on resolution, exposure time and PC performance). This is especially important when observing live microorganisms. In addition to this, the camera is exceptionally sensitive. Even in low light conditions (high magnifications, contrast methods) the camera can be operated with short exposure times. FEATURESHigh quality metal housingNumerous software functions, e.g. measurement, focus-stacking (combines several images for more depth of focus), mosaic (for larger image fields)Image and video capture, incl. time-lapse functionGood compatibility with different microscopesHighspeed USB 3.0 connectionModern Sony® IMX226 sensor 7.53 mm x 5.64 mm (1/1.7'') SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6th generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 3.0, 3.1 SCOPE OF DELIVERYCamera head, USB 3.0 cable 23.2 mm adapter, 30 mm and 30.5 mm adapters capture and image processing software