Premium sensor for even greater precision – compatible with selected weather stations. See compatibility below.
- Measures temperature and humidity
- For some weather stations with 433 MHz frequency (see compatibility list)
- Clear display
- 50m range (in open terrain)
Product number:
7009992
EAN:
4007922147741
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER Wireless Sensor"
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.
- 15002
- 15460
- 7001040
Living room, bathroom, kitchen, wine cellar – there's no shortage of spaces where keeping an eye on the indoor climate makes sense. But one or two temperature and humidity sensors can quickly fall short. Add this neat little thermo-hygrometer sensor to your compatible weather station and keep tabs on every corner of your home.
FEATURES
- Measures temperature and humidity
- For some weather stations with 433 MHz frequency (see compatibility list)
- Clear display
- 50m range (in open terrain)
SCOPE OF DELIVERY
- Thermo-hygrometer sensor
- Instruction manual
| Assembly required: | No |
|---|---|
| Batteries included: | No |
| Batteries required: | Yes |
| Colour: | black |
| Display height (cm): | 1 |
| Display size (diagonal in cm): | 2.2 |
| Display width (cm): | 2 |
| Extended warranty (years): | 5 |
| Height of the largest digit on the display (cm): | 0.8 |
| Measurement accuracy outside humidity (%): | ± 5 |
| Measurement accuracy outside temperature (°C): | ± 1 |
| Measurement function: | Humidity , Temperature |
| Measurement range for outdoor humidity sensor from (%): | 20 |
| Measurement range for outdoor humidity sensor up to (%): | 95 |
| Net Weight total (incl. accessories) (g): | 70 |
| Net weight (without access.) (g): | 48 |
| Number of sensors included in the package: | 1 |
| Outside temparature (°C) from: | -40 |
| Outside temparature (°C) up to: | 70 |
| Power supply unit included: | No |
| Sensor height (mm): | 30 |
| Sensor length (mm): | 97 |
| Sensor weight (g): | 48 |
| Sensor width (mm): | 50 |
| Smartphone app: | No |
| Total height (mm): | 30 |
| Total length (mm): | 97 |
| Total width (mm): | 50 |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- RISK OF SUFFOCATION! Improper use of this product can lead to suffocation, especially in children. Therefore, it is essential to follow the safety information below. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a suffocation risk! This product contains small parts that could be swallowed by children! There is a suffocation risk!
- Risk of electric shock! This device contains electronic parts powered by a power source (power supply and/or batteries). Improper use of this product poses a risk of electric shock. An electric shock can cause serious to fatal injuries. Therefore, be sure to follow the safety information below. Never leave children unsupervised when handling the device! The device must only be used as described in the instructions, otherwise, there is a risk of electric shock!
- Explosion risk! Improper use of this product poses an explosion risk. Be sure to follow the safety information below to avoid an explosion. Do not expose the device to high temperatures. Only use the recommended batteries. Do not short-circuit the device and batteries, or throw them into fire! Excessive heat and improper handling can cause short circuits, fires, and even explosions!
- Risk of material damage! Improper handling may damage the device and/or accessories. Therefore, use the device only according to the following safety information. Do not disassemble the device! In case of a defect, please contact your specialist dealer. They will contact the service center and may send the device for repair if necessary. Do not immerse the device in water! Do not expose the device to shocks, vibrations, dust, prolonged high temperatures, or extreme humidity. This may lead to malfunctions, short circuits, as well as damage to batteries and components. Only use the recommended batteries. Always replace weak or used batteries with a completely new set of fully charged batteries. Do not use batteries from different brands, types, or varying capacities. Remove batteries from the device when it is not used for an extended period.
- Risk of voltage damage! The manufacturer is not liable for voltage damage resulting from incorrectly inserted batteries!
Skip product gallery
Accessories
KIENZLE Home Weather Station Slim
€17.90*
The KIENZLE Home Weather Station Slim combines elegant design with impressive functionality. Its clear display provides accurate readings of temperature and humidity for both indoor and outdoor areas. You’ll also benefit from reliable weather forecasts featuring a handy trend indicator. And, as you’d expect from Germany’s oldest watchmaker, the time is always displayed.
Comprehensive measurement features This wireless weather station uses a built-in thermo-hygrometer to monitor indoor temperature and humidity. Outdoor data is gathered by the wireless sensor, which transmits temperature and humidity readings from up to 60 metres away directly to the weather station’s sleek display.
Accurate weather forecasting Get trustworthy weather forecasts including a practical trend arrow. Calibration is quick and easy during setup. Just check it against the current outdoor conditions, make a quick adjustement if necessary, and you’re good to go. From then on, forecasts are reliably calculated based on air pressure changes.
Additional useful features The station records maximum and minimum values, making it easy to track changes in temperature and humidity at the press of a button. The display also features a touch-activated backlight, perfect for use both day and night. Discover the KIENZLE Home Weather Station Slim, a stylish weather measurement device that fits perfectly into any environment.
FEATURES BASE STATION
Sleek wireless weather station with a user-friendly display Measures indoor temperature and humidity Displays outdoor temperature and humidity Weather forecasts with trend indicator (based on air pressure) Max/min value memory Touch-activated backlight Time display Battery-powered: 2x AAA (not included)
FEATURES OUTDOOR SENSOR
Measures temperature and humidity Range: up to 60 metres Mounting options: hanging loop or stand Battery-powered: 2x AAA (not included) SCOPE OF DELIVERY
Weather station Thermo-hygro outdoor sensor Instruction manual
Available
Skip product gallery
Customers also bought
%
BRESSER Additional / Spare Base Station for Anemometer 7002531
€10.00*
€49.99*
(80% saved)
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002531
Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURESReceives weather data from the 3-in-1 professional wind gaugeIntegrated sensor for measuring the humidity (%) and temperature (°C/°F)Graphical weather trend display (24 hours)Wind speed display (Avg = average, Gust = current gusts)Wind speed classification display (light, moderate, strong, stormy)Maximum and minimum value alarm functionWeather index display for dewpoint, windchill factor, feels-like temperature and heat indexAutomatically sets the time via DCF radio signalAlarm function with snooze buttonIce/frost alarmHistorical data memoryOrange LCD backlightAdjustable display contrastPower supply: 2 batteries (type AA, 1.5 V), not included
SCOPE OF DELIVERYBase stationRemovable standExternal sensor not included!Instruction manual
Available
Skip product gallery
Customers also viewed
BRESSER Thermo Outdoor Sensor
€24.95*
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.70042007004200GYE0007004200HZI0007004200MGU0007004200QT50007004210960420096042107004200000000
In bedrooms, study rooms, living rooms, bathrooms, and even kitchens – continuously monitoring the room temperature is beneficial in many areas of the house to ensure a pleasant living climate. Therefore, you can enhance your weather station with this precise BRESSER Thermo Outdoor Sensor for another measurement location. The temperature data is quickly and reliably transmitted to the display of your base station from a distance of up to 80 meters.
How warm is it really here? The sensor has its own LCD display, so you can read the current temperature values directly on site. This makes the thermometer also ideal as a standalone thermometer.
FEATURES
Measurement of temperature
Clear LCD display
Suitable as a standalone solution, replacement, or additional sensor for some BRESSER weather stations
Range: up to 80 m
IP protection class: IP44
Dimensions: 71 x 64 x 22 mm / Weight: 44 g
Battery operated: 2x 1.5 V AAA batteries (not included)
SCOPE OF DELIVERY
Thermo radio sensor
Instruction manual
Available
BRESSER Thermo-Hygro Sensor 3CH for ClimaTrend MC/TB and most products of the ClimaTrend Series
€29.99*
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.70602009070500
Living room, bathroom, kitchen, wine cellar – there's no shortage of spaces where keeping an eye on the indoor climate makes sense. But one or two temperature and humidity sensors can quickly fall short. Add this neat little thermo-hygrometer sensor to your compatible weather station and keep tabs on every corner of your home.
FEATURESTemperature displayHumidity display3 channels settableRC frequency: 433 MHz
SCOPE OF DELIVERYRemote sensor
Available
BRESSER Thermo-Hygro RC Transmitter 5CH
€19.99*
Living room, bathroom, kitchen, wine cellar – there's no shortage of spaces where keeping an eye on the indoor climate makes sense. But one or two temperature and humidity sensors can quickly fall short. Add this neat little thermo-hygrometer sensor to your compatible weather station and keep tabs on every corner of your home.This device is compatible with weather stations with the following article numbers: 7001001
7001030
7001101
7002500
7003101
7004000
7004001
7004002
7004110
7004250
7004300
7004301
7007000
7008000
7008001
7007300CM3000
7007300QT5000
7009000FEATURES
Measures temperature and humidity
For some BRESSER weather stations with 433 MHz frequency (see compatibility list)
5 adjustable channels
Clear display
50m range (in open terrain)
SCOPE OF DELIVERY
Thermo-hygrometer sensor
Instruction manual
Available
%
BRESSER HCHO + VOC Sensor
€99.00*
€189.00*
(47.62% saved)
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700324070035207003700700380070039009080700
If there’s something in the air, it’s probably not very good for us. This could be formaldehyde (HCHO) or Volatile Organic Compounds (VOC), which can enter our ambient air through things like furniture, materials, tobacco smoke, paints or adhesives. With the BRESSER HCHO + VOC Sensor, you can keep an eye on the air quality and take targeted measures to improve the situation. The integrated LC display of the sensor displays precise formaldehyde readings as well as the VOC level in the air.
Already have a compatible weather station from BRESSER? Then you can quickly connect the HCHO + VOC sensor and start to display the readings there as well.
Use the BRESSER HCHO + VOC Sensor as a stand-alone solution to keep an eye on your air quality, or as an extension for your weather station.
FEATURES
Sensor for formaldehyde measurement (HCHO) with VOC content (Volatile Organic Compounds)
Can be used alone or with select BRESSER weather stations
Integrated LC display (37 x 21 mm) for displaying HCHO values and VOC content
With battery level indicator
4 available channels
Range: up to 150 m
Power supply: USB connection and/or 3x AA rechargeable batteries, 1.2 V (included)
Size: 82 x 120.5 x 43 mm
SCOPE OF DELIVERY
HCHO + VOC Sensor
3x AA rechargeable batteries, 1.2 V
USB cable
Weather station not included
Instruction manual
Available
%
BRESSER Thermo-Hygro Sensor
€14.99*
€24.95*
(39.92% saved)
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15231152327004405
Living room, bathroom, kitchen, cellar – there are many rooms where it can be useful to monitor the indoor climate. If you’re in need of more temperature and humidity sensors for your home, this practical thermo-hygro sensor allows you to expand your existing BRESSER weather station for an additional measurement location. The sensor sends data to your base station over a frequency of 433 MHz at a range of up to 30 metres. What’s more, it also features a clear LCD display so that you can read the measurements directly from the device or use the sensor as a discreet standalone solution.
FEATURES
Measures the temperature and humidity
Clear LCD display
Can be used as standalone solution or as an additional sensor for select BRESSER weather stations
Wireless transmission range: 30 m
Dimensions: 60 x 22 x 60 mm / Weight: 39 g
2x 1.5 V AAA batteries (included)
PACKAGE CONTENTS
Wireless thermo-hygro sensor
2x AAA batteries (1.5 V)
Instruction manual
Available
BRESSER Precision Thermo-Hygro Sensor
€34.95*
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519615197151981519915201154391544015659156601647970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual
Available
BRESSER Thermo-Hygro Sensor 3CH - Suitable for BRESSER Thermo-Hygrometer
€19.99*
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.70074007007500950120095012019501202
Living room, bathroom, kitchen, wine cellar – there's no shortage of spaces where keeping an eye on the indoor climate makes sense. But one or two temperature and humidity sensors can quickly fall short. Add this neat little thermo-hygrometer sensor to your compatible weather station and keep tabs on every corner of your home.
FEATURES3 channel available433 MHz transmitting frequencyFoldable standIntegrated hole for easy wall mountingRequires 2x AAA batteries (not included)
SCOPE OF DELIVERYThermo/Hygrometer
Available
