5,5mm high-resolution argon-purged high-end eyepiece with 100° apparent field
- Huge apparent field of view not only gave the observer a panoramic visual experience, but they relax the eye so the observer could pay attention to subtle details for extended periods.
- Each 100° Series Argon-Purged Waterproof eyepiece is internally sealed and purged with inert, dry argon gas.
- This also maximizes the life of the internal coatings.
- Every 100° eyepiece is tested by submerging them down to 1 meter of water for 30 minutes.
- All 100° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.
- Dimensions and specifications of all eyepieces can be found in the pdf in the folder "media"
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and the direct path to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the item number or EAN and open the appropriate help page directly.
Service PortalGuides & Tips
Telescopes - Optics and mechanics
The ultimate guide to the ideal microscope for examinations of koi parasites.
Read nowFAQ - Frequently Asked Questions
- Alt-azimuth: easy to use, moves horizontally and vertically
- Equatorial: enables precise tracking of objects with only one axis – ideal for high magnifications and astrophotography
- Moon: from 30 mm
- Planets: from 100 mm
- Deep sky: from 150 mm
Product information "EXPLORE SCIENTIFIC 100° Ar Eyepiece 5,5mm (2")"
Each 100° Series Argon-Purged Waterproof eyepiece is internally sealed and purged with inert, dry argon gas to prevent internal fogging, to halt the intrusion of fine particulates and fungus. This also maximizes the life of the internal coatings.
To make sure, every 100° eyepiece is tested by submerging them down to 1 meter of water for 30 minutes.
All 100° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.
| Apparent field of view (degrees): | 100 |
|---|---|
| Batteries required: | No |
| Colour: | black |
| Extended warranty (years): | 10 |
| Eyecups: | Rubber eyecups, foldable |
| Eyepiece Barrel Diameter (mm): | 50.8 |
| Focal length (mm): | 5.5 |
| Length of the eyepiece barrel (mm): | 39 |
| Lenses/Groups [Eyepiece]: | 8/6 |
| Material: | Stainless steel |
| Net weight (without access.) (g): | 620 |
| Waterproof 8): | Yes |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
www.bresser.de
- General safety instructions DANGER Risk of eye injuries! Never look directly at the sun or near the sun through this device. There is a risk of blindness! Children should only use the device under supervision. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! FIRE HAZARD! Do not expose the device especially the lenses to direct sunlight! The light concentration could cause fires. RISK of material damage! Do not dismantle the device! In case of a defect, please contact your dealer. They will contact the service center and may send the device in for repair. Do not expose the device to temperatures above 60°C!
- Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
- Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
- Do not expose the device to high temperatures.