EXPLORE SCIENTIFIC 10x60 Finder and Guider Scope with Helical Focuser, 1.25inch and T2 connection

Universal 50mm viewfinder and guide telescope with a focal length of 220mmExcellent 8x50 viewfinder telescope with removable eyepiece unit and crosshairs with adjustable red illumination. The precise helical focuser and the 1.25 inch /31.7mm plug-in connection, as well as the T2 camera connection thread (M42x0.75mm), allow the autoguiding required for long time exposure to obtain a point-shaped star image. It can also be used as a mini travel telescope.High quality 8x50 viewfinder telescope with adjustable crosshair illuminationImage sharpness and viewing characteristics lift this viewfinder well above the level of the usual 8x50 viewfinder scopes. The visible image is bright and crisply sharp. Furthermore, this viewfinder has a very large field of view (FOV) of 6.96 degrees. This makes finding and adjusting objects much easier. The existing scale markings (pitch=1 degree) on the crosshairs are a good reference for estimating distances, and the open centre markings also make it easier to centre objects precisely. All lens surfaces are protected against weathering by multi-coating and guarantee a bright viewfinder image due to the high light transmission values. The adjustable red LED illumination unit is powered by two LR41 coin batteries. The main lens and the crosshairs can be focused independently of each other, giving you perfect focus for your eyes.Compact tracking unit for autoguidingOne of the main applications for this telescope is the so-called autoguiding. Here the usually larger photo-taking optics are actively corrected by a smaller guiding telescope with a second tracking camera. This means that the mechanical fluctuations in the tracking accuracy, which are present in all astronomical telescope mounts, are measured by the tracking camera and compensated accordingly. This is necessary in order to obtain a point-shaped star image on the astrophotos during long time exposures and to avoid unwanted star trails. For this purpose, the guiding telescope is inserted into the existing viewfinder shoe of the photo-taking optics and aligned parallel. If the existing viewfinder shoe is not compatible, a suitable viewfinder shoe is also included. With the 1.25 inch / 31,7mm plug connection at the rear end or via T2 thread connection (M42x0,75mm), a tracking camera can be mounted afterwards. This is held securely by a brass ring clamp and 3 clamping screws. Please note the required back focus for your tracking camera. The focal plane (backfocus) is approx. 22mm behind the T2 thread. The sensitive focusing on the guiding star is done by a large knurled wheel of the mechanically precise manufactured helical focuser. For easy reproduction of the point of focus, this has a white millimetre scale from 0 to 28mm, which is attached by laser engraving. After the tracking camera has been connected directly or via computer to the telescope mount and the necessary basic settings have been made, the first astrophotos with long time exposure can be taken.Use as mini travel telescopeThis viewfinder and guide telescope can also be used quite simply as a mini travel telescope. With the optional eyepieces, a magnification of 8x to 40x can be achieved. Nearly all eyepieces with a focal length of 5 to 26mm and 1.25 inch/31.7mm plug connection are suitable. Especially recommended are the EXPLORE SCIENTIFIC eyepieces of the 52 degree (Art. 02195xx) and 62 degree (02196xx) LER series. Note: Only straight view use is possible.Metal viewfinder holder and viewfinder shoeThe mount of this viewfinder and guide telescope is completely made of aluminium and is a stable base. The viewfinder mount is suitable for many common types of telescopes, such as EXPLORE SCIENTIFIC, BRESSER MESSIER etc. If the existing viewfinder shoe is not compatible, a matching viewfinder shoe is also included. This can be attached to the telescopic tube by means of four M5 screws. The bore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axis. The six large adjustment screws with non-slip knurling make it easy to align the viewfinder, even with clammy fingers. All adjusting and clamping screws have plastic tips that effectively prevent the viewfinder housing and viewfinder mount from being scratched.FEATURESExcellent 8x50 viewfinder and guiding telescopeCan also be used as mini travel telescopePerfect image sharpness and good viewing comfortFMC Multi-coated lens surfacesLens focal length: 220mmMax. possible camera weight: 550gRemovable eyepiece/cross hair unitCamera connection via 1.25 inch / 31.7mm plug connection or T2 threadT2 thread: M42 x 0,75mmPrecise helical focuser for focusing the visible imageFocuser travel range: 28mmClose focus distance: 3 mLaser engraved millimetre scale from 0 to 28mm on the focuserFocal plane (backfocus) is approx. 22mm behind the T2 threadSeparate focusing of the crosshair at the eyepieceVery large field of view FOV of 6.96 degreesWith adjustable red cross-hair iillumination Scale markings crosshair with 1.0 degree graduationPower supply of illumination unit: coin battery type LR41 (2pcs)Brass ring clamp and 3 clamping screws on the 1.25 inch plug connectionWith optional eyepieces magnifications from 8x to 40x can be achievedSuitable are almost all eyepieces with 1.25 inch/31,7mm shaftMounting of the viewfinder telescope is completely made of aluminiumViewfinder mount with 6 large adjustment screws with knurled head for easy gripFinder shoe suitable for EXPLORE SCIENTIFIC, BRESSER MESSIER etc.Additionally a suitable viewfinder shoe is includedBore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axisAdjusting and clamping screws have plastic tipsSCOPE OF DELIVERY8x50 viewfinder/guiding telescopeEyepiece unit with crosshairCrosshair illumination unit incl. batteriesViewfinder holder with viewfinder shoeInstruction manual

Top viewfinder telescope with upright field, illumination, 90° view and pole viewfinder engraving - image sharpness and viewing behavior raise this viewfinder significantly above the level of the usual 8x50 viewfinder telescopes. The upright image field facilitates orientation. Multi-Coating on all surfaces. This polar finder is mainly intended for the observer with a transportable telescope. The 90° view facilitates operation, and with the help of the pole scale and the lighting, a telescope can be quickly and safely aligned to the celestial pole. The upright field of view makes the handling together with the high image sharpness a pleasant experience. The lighting is powered by two LR41 button cells.

BRESSER Messier 8x50 Viewing finder scope with mount and integrated illumination. Finder slot included.FEATUREShigh-quality workmanshipintegrated illuminationeyepiece with reticleSCOPE OF DELIVERYviewfindermountviewfinder shoeprotective caps

Explore Scientific 8x50 illuminated finder scopes (available in straight-thru and right angle versions) produce images that are right-side-up and left-to-right corrected views, which makes it easier to find objects in the sky. The Explore 8 X 50 Straight-Thru Erect Image Illuminated Finder Scope, with its scale markings and open Center, not only helps you center objects precisely, but gives a reference of the exact field of view in Degrees. The deep red Illumination can be adjusted to just the right brightness. The eyepiece has comfortable eye relief and produces a 6,97 degrees field of view. Both the eyepiece and the main objective can be focused independently so that you can obtain perfect focus for your eyes. The straight-thru finderscope weights just under a pound (450gr), and measures 216mm" x 63mm" x 58mm". FEATURES High quality 8x50 upright viewfinder With adjustable crosshair lighting with scale markings Perfect image sharpness and good viewing behaviour Large field of view FOV of 6.96 degrees Focusing of lens and crosshair separately possible.  Multi-coated lens surfaces. Power supply by 2 pcs coin battery type LR41.FEATURESHigh quality 8x50 upright viewfinderWith adjustable crosshair illumination and with scale markingsPerfect image sharpness and good viewing behaviourLarge field of view FOV of 6.96 degreesFocusing of lens and crosshair separately possibleMulti-coated lens surfacesSCOPE OF DELIVERYFinder scopeFinder bracket

BRESSER Full HD Deep Sky Camera with autoguider: a great camera for different types of astrophotography and for autoguiding. Not only suitable for planets, but also for deep-sky objects such as galaxies, nebulae and star clusters. Dedicated ToupSky Astro Imaging software supports video preview, video recording, video processing, image capture and processing, dark field correction and raw data output. Easy to use, but with professional results. One of the main features of the new backlit SONY IMX290 CMOS sensor is its high light sensitivity, which makes it possible to detect deep-sky objects without active cooling. SONY has increased the quantum efficiency at 533 nm wavelength up to 77%, which is much better than other CMOS sensors have been able to achieve in the past. Connect this camera to a guidescope and attach the camera's built-in ST-4 port, directly to your telescope's equatorial mount guide port and autoguide - using many popular audioguiding programs (PHD, Guidedog and more). Autoguiding enables you to take accurate pictures with long exposure times of several minutes. Thanks to the extra light-sensitive camera, you now always have a suitable guide star to hand, even using short exposure times. An ST-4 protocol connection cable is also included. Simple automatic tracking at its best. You can use this camera with all guiding telescopes, or off-axis guiders that accept a 1.25 " tube, 1.25" filter thread (M28.5x0.6) or C-mount adapter thread (1 "x1 /32"). IMPORTANT NOTES: This is not a stand-alone guider camera. You always need a Windows 10/11 computer to take pictures and for autoguiding. The autoguider software is not included. You can use PHD2 Guiding, Guidedog, Metaguide, Guidemaster (freeware) or AstroArt, MaxIm DL (paid). DOWNLOAD PHD2-Guiding: https://openphdguiding.org/ DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html DOWNLOAD latest camera software and drivers: https://www.touptek-astro.com/downloadsDownload INDI Driver: https://github.com/indilib/indi-3rdparty/tree/master/indi-toupbase SPECIFICATIONS Camera type: BRESSER / Touptek GPCMOS02000KPA color Sensor: SONY IMX290 CMOS color, backlit Image and video size: Full HD 1936 x 1096 pixels (video 15 FPS) Native sensor size in pixels: 1936 x 1096 Exposure times: 66µs to 16min Binning: YES, 2x2 Megapixel: 2.1 MP Sensor size in mm: 5.6 x 3.1 Pixel size: 2.9 µm x 2.9 µm Bit depth: 8/12 switchable ST-4 Compatible Autoguider: YES CNC milled housing made of aluminum Protective strap on the camera housing Camera tube diameter: 1.25 "(31.7 mm) Camera connection thread: C-mount + 1.25 "filter thread Computer interface: USB 2.0 C-mount extension tube with 1.25 inch filter thread included No IR cut filter installed Operating system: WINDOWS 10 + 11 ASCOM driver included Field of view for different focal lengths in mm (given in arc minutes): 400mm - 48.2 'x 27.3' 500 mm - 38.6 'x 21.8' 600 mm - 32.1 'x 18.2' 700 mm - 27.5 'x 15.6' 800 mm - 24.1 'x 13.6' 900 mm - 21.4 'x 12.1' 1000 mm - 19.3 'x 10.9' 1250 mm - 15.4 'x 8.7' 1500 mm - 12.9 'x 7.3' 1750 mm - 11.0 'x 6.2' 2000 mm - 9.6 'x 5.5' SCOPE OF DELIEVERY Full HD camera C-mount adapter USB 2.0 PC connection cable with a length of 200cm Interface cable for ST-4 autoguider port with 150cm length Dust cap for camera tube Software CD

NEW – now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.In the past few years the Bresser Newton telescopes have become the standard workhorse for Deep Sky astrophotography. We now proudly present the second generation of this telescope, the Bresser NT-203s/800 with Hexafoc and a fast parabolic main mirror. The Bresser NT-203s/800 f3.9 will deliver you deeper images due to its - compared to 8" f/5 systems - oversized primary mirror and therefore faster optical system with the same exposure time. The big 85 mm secondary prevents vignetting for optimal illumination The excellent 2.5" Hexafoc focuser also does not cause vignetting due to its large diameter and makes focussing a joy - the smoothness and shifting-free operation sets new standards in this price class. This groundbreaking focuser, tube rings with 44mm universal standard dovetail and camera mounting feature and a high-end finderscope with haircross and laser-engraved scale  leave nothing to desire even for demanding astrophotographers. The NT-203s/800 Hexafoc has a classical tube construction with an aluminium tube. The focuser can be upgraded with a 10:1 reduction (part No. 0625720) without problems. Ready to use with the  HR Coma Corrector (part No. 0510330) which eliminates coma, field-curvature and astigmatism.Please note: Reflector telescopes with optical design Newton are very good for astronomical observing at the starry night sky. But these telescopes are not well usable for observing landscape and nature during daylight. Therefore we suggest BRESSER refractor (lens) telescopes for landscape and nature observing.CHARCTERISTICS Optical design: reflector telescopeMirror diameter: 203 mm / focal length: 800 mm / F/3.9Maximum recommended magnification: 406xTelescope for night and solar observing Very high quality Hexafoc focuser with 2.5" free inner diameter Diffraction limited optics with parabolic main mirror 8x50 straight through viewfinder with reticle Optimized finder socket for comfortable use Cradle rings with handle and integrated piggyback camera holder (1/4 thread) Smartphone adapter for celestial navigation included Dovetail plate with stainless steel rail Can be connected to SLR cameras (optional T2 ring required) 50.8mm (2) to 31.7mm (1.25) adapter with integrated T2 thread (T2-adapter ring for your camera is needed) Aperture 203 mm Focal length 800 mm Focal ratio f/3.9 Backfocus fully inward focused: 100 mm 85 mm secondary mirror for optimal illumination Large knobs for primary and secondary mirror adjustment Tube without accessories: 8.7 kg - Tube with all accessories mounted: 11.5 kgSCOPE OF DELIVERYOptical tube 26 mm Super Plössl eyepiece 31,7 mm (1.25") Integrated 31,7 mm and T2 adapter Prism rail with stainless steel clamping surface Adapter for 50.8 mm (2") eyepieces 8x50 optical viewfinder Rotatable star map Aperture solar filter Tube clamp with handle and camera holder Smartphone adapter for celestial navigation Software Stellarium (via download)

The view of the night sky holds countless fascinating sights in store for us. The BRESSER Polaris-I 102/460 EQ3 lens telescope comes with everything you need for a quick and easy start in astronomy: an astronomical lens telescope with 102 mm aperture and 460 mm focal length, an equatorial mount, a tripod and a wide range of accessories. The system is extremely easy to handle - perfect for newcomers to the exciting hobby of astronomy. Moreover, due to its compact dimensions, the entry-level telescope is ideally suited as a travel telescope. So find the perfect observation site and enjoy an exciting ''walk'' through the Milky Way. Classic telescope for a new generation of stargazers – the telescope Children and beginners in particular benefit from the classic design of this lens telescope, which is also called an achromatic refractor according to Fraunhofer. This is mainly due to its easy handling – ideal for your fist steps in celestial observation. The entry-level telescope owes its good imaging properties to the optics’ modern, precise coating. The 102 mm aperture already collects a lot of light from the celestial objects. But it is due to the very short focal ratio (ratio of 102 mm aperture and 460 mm focal length) of about 1 to 4.5 (F/4.5) that you can enjoy an extra-bright image. Another advantage of the combination of short focal length and fast focal ratio: the beginner's telescope shows you the details in the Milky Way and extended gas nebulae such as the North America Nebula NGC 7000 particularly impressively. This makes a ''trip'' through the Milky Way with low magnification so much fun. However, the telescope will also give you a lot of pleasure while travelling on Earth, because it is very compact and thus perfect as a travel telescope. And what about the magnification? Here, too, the aperture of 102 mm shows its effect: It gives the telescope a resolving power that easily allows magnifications of up to about 200x with sharp images. From a purely technical point of view, this is by no means the limit – with the included accessories, you can theoretically magnify up to 345x. The image sharpness can slowly decrease with increasing magnification, though. However, the degree of magnification achievable does not only depend on your telescope. The air turbulence in the atmosphere (seeing conditions) also influences your astronomical observations. Set up, align, start marvelling – mount and tripod Found the perfect location for your observations? Then attach the telescope tube to the eight-adjustable aluminium tripod with equatorial mount and off you go. The special advantage of equatorial mounts: Unlike with an azimuthal mount, you don't need to move both axes at the same time. Instead, you align one axis parallel to the Earth's axis by pointing it approximately at the polar star. Then you simply track the movement of the celestial bodies just on this one axis. Because you move the axes via two flexible shafts with fine adjustment, you can adjust and track the beginner's telescope very precisely and comfortably. And for quick access to all your accessories, simply place them on the tray between the tripod legs.Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable! Must-haves for star observation – the accessories In order for you to start stargazing right away, the astronomy set comes with many accessories. With the LED viewfinder, you can easily keep track of the sky. Just install the viewfinder parallel to the actual telescope and it projects a red dot onto a small ground-glass screen. When you look through it, this dot appears to be floating in front of the sky. Not just anywhere, but exactly at the point at which your telescope aperture is currently pointing. This allows you to align your telescope more precisely and find the celestial objects you have chosen for your night-time exploration much more easily. As with everything else, a change of perspective is always fun. Therefore, the two eyepieces (4 mm and 20 mm) allow you to view the objects in different magnifications – and thus enjoy completely different views. You want to see even more details? Then triple the magnification of the eyepieces with the 3x Barlow lens. The telescope for beginners is also flexible when it comes to upgrades: the diameter of the sockets is 31.7 mm (1.25 inches), which is an international standard that applies to all manufacturers. So you can choose from a large variety of additionally available eyepieces. In order for you to explore the universe with ease, the 90-degree star diagonal mirror always offers a comfortable view into the beginner’s telescope. Even if the telescope is pointed vertically upwards into the sky, you simply look in from the side – and just enjoy the view. But it is not only at night that the sky attracts our attention with spectacular highlights. In the daytime sky, our nearest star is particularly worth seeing. You can observe it completely safely using the solar filter. You will be amazed once you take a closer look at the sunspots and the granulation on the Sun. CAUTION: Never point the telescope at the Sun without the solar filter! Capture your favourite moments of sky observation. You can easily take your first steps in astrophotography by using the smartphone camera adapter – for impressive snapshots of the Sun and Moon, for example. Set off on your very own voyage of discovery to the Sun, Moon and through the Milky Way – with the BRESSER Polaris-I 102/460 EQ3 refractor telescope. FEATURES Telescope for beginners with 102 mm aperture and 460 mm focal length Achromatic refractor type Fraunhofer Ideal for observing the Milky Way and extended gas nebulae at low magnifications Height-adjustable tripod with equatorial EQ3 mount Easy to use, very good for beginners Focal ratio F/4.5, therefore very fast and bright image Very compact, therefore good as a travel telescope 50.8 mm (2 inch) focuser with adapter to 31.7 mm (1.25 inch) Two eyepieces and one Barlow lens with 31.7 mm (1.25 inch) sockets for different magnifications Safe solar observation with the included solar filter Entry into astrophotography with smartphone camera adapter SCOPE OF DELIVERY Lens telescope Aluminium tripod Equatorial EQ3 mount Eyepieces: 4 mm and 20 mm (1.25 inch sockets) Barlow lens 3x (1.25 inch socket) Star diagonal mirror LED illuminated dot finder Solar filter Smartphone camera adapter Accessory tray Astronomy software download Instruction manual