EXPLORE SCIENTIFIC 2" UHC Nebula Filter (Refurbished)
The EXPLORE SCIENTIFIC UHC Nebula filter allows precise observation of deep sky objects
- High-quality EXPLORE SCIENTIFIC UHC Nebula Filter
- Only allows the transmission of emission lines of hydrogen at 486nm and 656nm and the oxygen lines at 496nm and 501nm
- Absorbs all remaining emission lines and almost all artificial light
Currently not available
Product number:
R0310210
EAN:
4007922083612
WEEE-Reg.-Nr.:
DE 34323861
Product information "EXPLORE SCIENTIFIC 2" UHC Nebula Filter (Refurbished)"
NOTE: This item is a used or returned product. This means: The item may show slight signs of use; some accessories may be missing; the packaging may differ from the original packaging. Please note that refurbished items generally come with a 12-month warranty.
| Batteries required: | No |
|---|
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- General safety instructions DANGER Risk of eye injuries! Never look directly at the sun or near the sun through this device. There is a risk of blindness! Children should only use the device under supervision. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! FIRE HAZARD! Do not expose the device – especially the lenses – to direct sunlight! The light concentration could cause fires. RISK of material damage! Do not dismantle the device! In case of a defect, please contact your dealer. They will contact the service center and may send the device in for repair. Do not expose the device to temperatures above 60°C!
- Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
- Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
- Do not expose the device to high temperatures.
Customers also bought
%
BRESSER Field Tripod ST-3 stainless steel
€167.00*
€209.00*
(20.1% saved)
The BRESSER Field Tripod ST-3 is a solid and height-adjustable tripod with double tripod leg clamp and made of corrosion-resistant stainless steel. It is suitable for direct usage with the BRESSER Slider Binocular Mount. Adjust the extendable stainless steel tripod to the desired base height and thereby pre-select your favourite observation position. For example, for landscape observation while standing or sitting, the full tripod height should be used. For night sky observation, a lower setting is recommended to ensure a comfortable viewing position while sitting or lying down. The tripod is equipped with a standard GP mounting head and a central screw with metric M10 threaded shaft. It is also suitable for EXOS-1 and EXOS-2 EQ mounts. The upper tripod leg tubes have a diameter of 50.8 mm (2 inches).FEATURESFor usage with BRESSER Slider Binocular Mount Standard GP mount head Also suitable for EXOS-1 and EXOS-2 EQ mounts Solid stainless steel and aluminium structure Double tripod leg clamp Height adjustable approximately from 68 to 110 cm Tripod weight: 5.5 kg Transport length approximately 87 cmUpper tripod leg tubes have a diameter of 50.8 mm (2 inches)SCOPE OF DELIVERYTripod Accessory tray Central spindle
