EXPLORE SCIENTIFIC 2" Variable Polarizing Filter

The neutral density filter transmits light uniformly across the entire visual spectrum. It serves as an excellent filter to reduce glare and irradiation when observing the Moon with any telescope 4"(10.2cm) and larger. The ND96 filter may also be employed in the splitting of close double stars where one of the binary pair significantly exceeds the other in brightness. Color Filter #ND96 Moon Filter (0.9 density; 13% transmission)

One of the most important obstacles for the exploration of the night sky is the brightening of the night sky by artificial lights, such as streetlights. The night sky is not really dark in the vicinity of towns or cities, which reduces the visibility of objects beyond the solar systems enormously. Depending on the type of the celestial object it is possible to increase the contrast dramatically by blocking the annoying artificial light. The EXPLORE SCIENTIFIC O-III filter uses a characteristic property of the so called emission nebulae. Those objects glow in special colours, the so called emission lines. Those emission lines are linked to chemical elements - in this case oxygen. The EXPLORE SCIENTIFIC O-III nebula filter blocks all other colours (and thereby nearly all of the artificial light) and only the two emission lines of the oxygen can pass the filter. The result is astonishing: suddenly nebulae are visible at locations that were completely empty without filters. In suburban skies for example the veil nebula NGC 6992 is almost not visible with a 200mm telescope. By using this filter you can see the nebula and its structures without problems. A must for every visual observer. The EXPLORE SCIENTIFIC nebula filters come with a individual test certificate - your guarantee to receive a premium filter.FEATURESenables the observation of so called emission nebulaeblocks almost the entire artificial lightonly the two emission lines of ionised oxygen passes the filterWHAT'S INCLUDED1x 2" O-III nebula filter

Universal 60mm viewfinder and guide telescope with a focal length of 250mmExcellent 10x60 viewfinder telescope with removable eyepiece unit and crosshairs with adjustable red illumination. The larger aperture and focal length, provide an even brighter field of view and more accurate tracking due to the higher resolution. The precise helical focuser and the 1.25 inch /31.7mm plug-in connection, as well as the T2 camera connection thread (M42x0.75mm), allow the autoguiding required for long time exposure to obtain a point-shaped star image. It can also be used as a mini travel telescope.High quality 10x60 viewfinder telescope with adjustable crosshair illuminationImage sharpness and viewing characteristics lift this viewfinder well above the level of the usual 10x60 viewfinder scopes. The visible image is bright and crisply sharp. Furthermore, this viewfinder has a very large field of view (FOV) of 6.0 degrees. This makes finding and adjusting objects much easier. The existing scale markings (pitch=0.85 degree) on the crosshair are a good reference for estimating distances, and the open centre markings also make it easier to centre objects precisely. All lens surfaces are protected against weathering by multi-coating and guarantee a bright viewfinder image due to the high light transmission values. The adjustable red LED illumination unit is powered by two LR41 coin batteries. The main lens and the crosshairs can be focused independently of each other, giving you perfect focus for your eyes.Compact tracking unit for autoguidingOne of the main applications for this telescope is the so-called autoguiding. Here the usually larger photo-taking optics are actively corrected by a smaller guiding telescope with a second tracking camera. This means that the mechanical fluctuations in the tracking accuracy, which are present in all astronomical telescope mounts, are measured by the tracking camera and compensated accordingly. This is necessary in order to obtain a point-shaped star image on the astrophotos during long time exposures and to avoid unwanted star trails. For this purpose, the guiding telescope is inserted into the existing viewfinder shoe of the photo-taking optics and aligned parallel. If the existing viewfinder shoe is not compatible, a suitable viewfinder shoe is also included. With the 1.25 inch / 31,7mm plug connection at the rear end or via T2 thread connection (M42x0,75mm), a tracking camera can be mounted afterwards. This is held securely by a brass ring clamp and 3 clamping screws. Please note the required back focus for your tracking camera. The focal plane (backfocus) is approx. 22mm behind the T2 thread. The sensitive focusing on the guiding star is done by a large knurled wheel of the mechanically precise manufactured helical focuser. For easy reproduction of the point of focus, this has a white millimetre scale from 0 to 28mm, which is attached by laser engraving. After the tracking camera has been connected directly or via computer to the telescope mount and the necessary basic settings have been made, the first astrophotos with long time exposure can be taken.Use as mini travel telescopeThis viewfinder and guide telescope can also be used quite simply as a mini travel telescope. With the optional eyepieces, a magnification of 9x to 50x can be achieved. Nearly all eyepieces with a focal length of 5 to 26mm and 1.25 inch/31.7mm plug connection are suitable. Especially recommended are the EXPLORE SCIENTIFIC eyepieces of the 52 degree (Art. 02195xx) and 62 degree (02196xx) LER series. Note: Only straight view use is possible.Metal viewfinder holder and viewfinder shoeThe mount of this viewfinder and guide telescope is completely made of aluminium and is a stable base. The viewfinder mount is suitable for many common types of telescopes, such as EXPLORE SCIENTIFIC, BRESSER MESSIER etc. If the existing viewfinder shoe is not compatible, a matching viewfinder shoe is also included. This can be attached to the telescopic tube by means of four M5 screws. The bore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axis. The six large adjustment screws with non-slip knurling make it easy to align the viewfinder, even with clammy fingers. All adjusting and clamping screws have plastic tips that effectively prevent the viewfinder housing and viewfinder mount from being scratched.FEATURESExcellent 10x60 viewfinder and guiding telescopeCan also be used as mini travel telescopePerfect image sharpness and good viewing comfortFMC Multi-coated lens surfacesLens focal length: 250mmMax. possible camera weight: 550gRemovable eyepiece/cross hair unitCamera connection via 1.25 inch / 31.7mm plug connection or T2 threadT2 thread: M42 x 0,75mmPrecise helical focuser for focusing the visible imageFocuser travel range: 28mmClose focus distance: 3 mLaser engraved millimetre scale from 0 to 28mm on the focuserFocal plane (backfocus) is approx. 22mm behind the T2 threadSeparate focusing of the crosshair at the eyepieceVery large field of view FOV of 6.0 degreesWith adjustable red cross-hair iillumination Scale markings crosshair with 0,85 degree graduationPower supply of illumination unit: coin battery type LR41 (2pcs)Brass ring clamp and 3 clamping screws on the 1.25 inch plug connectionWith optional eyepieces magnifications from 9x to 50x can be achievedSuitable are almost all eyepieces with 1.25 inch/31,7mm shaftMounting of the viewfinder telescope is completely made of aluminiumViewfinder mount with 6 large adjustment screws with knurled head for easy gripFinder shoe suitable for EXPLORE SCIENTIFIC, BRESSER MESSIER etc.Additionally a suitable viewfinder shoe is includedBore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axisAdjusting and clamping screws have plastic tipsWHAT'S INCLUDED10x60 viewfinder/guiding telescopeEyepiece unit with crosshairCrosshair illumination unit incl. batteriesViewfinder holder with viewfinder shoeInstruction manual

This Herschel wedge is designed for superior White-Light solar observing and imaging. It can be used with refracting telescopes up to 102mm aperture, with 1.25'' focuser. This complete system comes with installed ND3.0 filter.Herschel Wedges are used to observe the sun in White Light. Around 95% of the Sun's light is suppressed by the wedge's ceramic prism. The remaining sun light is dimmed further by a factory-installed ND3.0 grey filter. Lunt Solar Systems Herschel wedges are installed in a fully closed housing with integrated heat trap. No stray light can escape from this, therefore it is very safe method of observing our nearest star.The difference between Herschel-wedges and normal front mounted filters is that the filtering takes place just before the eyepiece or camera. This provides better contrast and sharpness of the solar image - with more surface detail visible as a result.  Furthermore, a Herschel wedge is inherently safer than at a front mounted filter. A Herschel wedge can not rip or become punctured like a foil filter can be and it cannot become detached from the telescope objective accidentally.Only for use with refractor telescopes up to 102mm aperture:Because the full energy and heat of the sun inside the telescope, we advise solely using refractors for Herschel-wedge use. The refractor must not have corrector lenses at the back. Optical elements like corrector lenses, or secondary mirrors of reflecting telescopes, could suffer from thermal build-up by concentrated solar energy and could be permanently damaged.Tuning the brightness:Because the Herschel-wedge produces polarised light, you can use a normal polarising filter at the eyepiece, or camera-adapter. By turning the polarising filter the image brightness can be varied to the user's liking.This additional Polarising filter is not included. We recommend the BRESSER 1.25'' polarising filter, no: 4946464.FEATURESFor refractor telescopes up to 102mm apertureConnection to telescope: 1.25''Connection to eyepiece: 1.25''90° housing like star-diagonalEspecially high-quality optical surfaces for very good contrastFully closed housing with integrated heat trapNo stray light escaping - therefore it is very safeThe needed ND3.0 filter is fix installedWHAT'S INCLUDEDHerschel-wedge for 1.25'' focuserIntegrated ND3.0 filterTransport caseInstruction manual

Ultra Light Dobsonian 406mm GENERATION II - with completely redesigned and improved construction. No telescope type has influenced amateur astronomy as radically as the dobsonian telescope. Before the introduction of this telescope type by John Dobson the vast majority of amateur telescopes were small inadequate refractors on shaky mounts - just good enough to show the polar regions on mars or the rings of Saturn. Bigger telescopes, like the Schmidt-Cassegrain telescopes, were restricted to the relatively small group of amateurs that could afford them.The brilliant combination of simple - but effective - mechanics and the largest aperture available led to a worldwide triumph of this concept. No other telescope type offers you so much light for your money as a good dobson. We have taken the motto "held together by gravity and driven by yoghurt power" and offer a modern version of the classic - designed by amateur astronomers for amateur astronomers. Despite its large aperture the telescope can be transported easily even in small cars and is assembled within minutes without tools. The construction was optimized for maximum rigidity with a minimum of mass. The combination of big altitude wheels and a optimized aluminium-sandwich construction allows for small movements even at high magnifications. The focus position is already positioned to accept our coma-corrector. The ideal workhorse for the deep-sky enthusiast. A telescope with 406mm aperture gathers more than 3300-times more light than the naked eye. Details on planetary surfaces stand out even to unexperienced observers, and countless deep-sky objects show details. Bright globular clusters are resolved down to the core and the view of the lunar terminator will provide a unforgettable experience. Dimensions for mobile use: Rockerbox 550mmx550mmx330mm; Mirrorbox 480mmx480mmx300mm; Trusses approx. 1250mm Eyepiece Height while pointing at zenith approximately 1,63m. 16“ Total net weight: 38,4 kg; 16“ Mirror Box: 23,8kg; 16“ Secondary Cage + Rockerbox: 10,5 kg; 16“ 4 Truss pairs: 2,5kg; 16“ Altitude Wheels: 1,6kg ; Focuser thread: M54 x 0.75 mm ; Backfocus: 45mm behind the 2" eyepiece holder. 35mm when the 1.25" adapter is mounted SPECIFICATIONS Truss-Dobsonian Telescope in full Aluminium construction NEW: Slider bearings made from TEFLON und GFK for smooth and precise movement NEW: Improved main mirror cell with completely redesigned mechanics NEW: Altitude bearings with new designed brake and friction system NEW: Larger feet to improve stability NEW: Universal finder slot to enable an easy finder upgrade NEW: Counter-weight system included - 2 x 1.0 kg NEW: Quick-lock fasteners with new springloaded design for comfortable use NEW: Powder-coated yellow altitude wheels to improve durability NEW: Laser engraved central mark on main mirror SCOPE OF DELIVERYTruss Dobsonian TelescopeLED finder with standard finder slotStray light shield for secondary cageMain mirror collimation toolBattery compartment with bag for fansCounter-weights 2 x 1.0 kg Extension tube for focuserReducer 2"/1.25"Manual

The new BRESSER Messier 12" Dobson enhances this well-liked telescope series while providing great portability due to its lightweight fibreglass telescope tube. Despite its low price, it offers a variety of functions as well as quality that you would not find in considerably more expensive devices. Thanks to the powerful telescope aperture of 305 mm, you get significantly more light-gathering capacity than with the smaller models and are therefore not limited to observing the moon and the planets of our solar system - you can already look far out into the universe and observe globular clusters, nebulae and galaxies with even greater brightness. Details become visible in most deep-sky objects: globular clusters are clearly resolved into individual stars and gas nebulae, which can only be guessed at with smaller devices, show structure. The device is unrivalled in its versatility: The excellent large Hexafoc focuser has an aperture of 65 mm - so there is no noticeable obstruction from the focuser tube even with large wide-field eyepieces. Thanks to the large altitude wheels, even these heavier eyepieces are held effortlessly. And if a particularly large number of accessories is attached, such as a binocular attachment, then the entire tube can be moved inside the tube clamps - and everything is balanced again in a flash. The unrivalled rigidity of the focuser makes focusing easy - so photography with this tube is also possible. This is another strength of this universal telescope: if you want to take photos, you can simply unscrew the altitude wheels from the tube and attach it to an equatorial mount using a dovetail bar - so there's nothing standing in the way of astrophotography. An optional 10:1 gear reduction for the focuser is available for the highest demands. Considering that the focuser is the most frequently used part of the telescope, the use of the Hexafoc in this device is a quantum leap for this price range. With the initial equipment, you can start observing immediately - a 6x30 finder and a 25 mm SPL eyepiece are included in the scope of delivery. Various other viewfinder types can also be retrofitted using the 2 new hybrid viewfinder shoes (Art. 0620158) supplied as standard. In addition, the new 12" BRESSER Messier makes it easy to transport the device as compactly as possible - the rocker box can be dismantled in a few simple steps because the parts are assembled with metal quick-release connectors. This quickly turns a bulky rocker box into a handy flat package of individual parts. A telescope whose versatility, performance and user-friendliness set new standards in this price class. Includes a high-quality objective solar filter for safe observation of sunspots, eclipses and planetary transits. A BRESSER premium telescope for night and solar observation. NOTE: Please note that "Newtonian" reflector telescopes are very good for astronomical observations in the starry sky, but are not well suited for nature and landscape observations during the day. We therefore recommend BRESSER refracting telescopes for nature and landscape observations. FEATURESType: Reflector telescope Telescope for night and solar observation Lightweight but very stable GRP telescope tubePrimary mirror diameter: 12" (305 mm) parabolic main mirror Focal length: 1,525 mm Aperture ratio: f/5 Maximum useful magnification: 610x Theor. resolving power: 0.45 arcseconds Easy to balance the tube by sliding it inside the tube rings Visual limiting magnitude: 14.5 mag Tube: GRP tube with adjustable tube rings and aluminium altitude bearings Focuser: 2.5" HEXAFOC focuser with 2" and 1 1/4" adapter Shifting-free focusing even with heavy accessories Secondary mirror bracket: very thin 4-arm steel spider Tube rings and altitude wheels made from aluminumDifferent sized adjustment and counter screws on the mirror cell Use of the optics also on EQ mounts (with optional dovetail bar) Mount: Dobsonian system Dismantlable rocker box Accessory tray for one 2" and two 1 1/4" eyepieces, mounted on the front side Eyepiece: BRESSER Super Plössl 25 mm (1 1/4") Viewfinder: 6x30 viewfinderHybrid viewfinder shoes (Art. 0620158) included (2 pcs)Tube weight without accessories: 16 kgTube weight with accessories: 18.9 kg Rocker box weight: 14.8 kg Total weight: 33.7 kg Overall dimensions: 60 x 60 x 163 cm SCOPE OF DELIVERY Tube with Newtonian optics Aperture solar filter 6x30 viewfinder Hybrid viewfinder shoes (2 pcs)25 mm Super-Plössl eyepiece (Ø 31.7 mm / 1.25") 1 extension tube 37.5 mm for 2.5" Hexafoc 1 eyepiece adapter Ø 31.7 to 50.8 mm 2 tube rings 2 altitude wheels Rocker box with 2 base plates and mounting material (disassembled for self-assembly) Shipping dimensions Box 1: 150 x 53 x 50 cm - 24 kg Shipping dimensions Box 2: 61 x 61 x 24 cm - 17 kg

Vixen 39361 camera adapter for eyepiece projection for SLR cameras, C mounts or CCD cameras. Can be attached to the flip mirror unit or rotary adapter on R200SS telescopes.Suitable for PL, NPL, LV and NLV series Vixen 31.7-mm eyepieces (not suitable for LVW series or 50.8-mm eyepieces) Can also be used on Vixen A70Lf, A70Mf and R130SfFEATURESEssential for photographing the moon and planetsSuitable for 31.7-mm eyepiecesCan also be used on Vixen A70Lf, A70Mf and R130SfNot suitable for 50.8-mm eyepiecesCan be connected to Vixen flip mirrorsCan be connected to T2 threadsPACKAGE CONTENTSVixen camera adapter for eyepiece projection