EXPLORE SCIENTIFIC 52° LER Eyepiece 6,5mm Ar (Refurbished)

The TELRAD viewfinder is a projection finder that can be installed on any telescope and makes it child's play to align the telescope with the starry sky.The TELRAD viewfinder is a practical alternative to classic optical viewfinders and illuminated red dot viewfinders. You can see the complete starry sky without magnification, and not just a small section as with a normal optical viewfinder. Against this background of the starry sky, three red luminous concentric rings are projected, with apparent diameters of 4 degrees, 2° and 0.5° in the sky. Move the telescope so that the object you are looking for is in the inner ring, and the telescope points in the right direction. Because the object you are looking for is inside the ring, it will not be irradiated like a normal illuminated red dot finder.The base of the TELRAD viewfinder is self-adhesive and can be mounted on all telescopic tubes from about 10cm diameter. The length of the base is about 18cm. This base remains on the telescopic tube, the TELRAD viewfinder itself can be removed or attached at any time by means of the attached quick coupling. The TELRAD is powered by two normal AA batteries (not included).There are star atlases, like the "Deep Sky Travel Atlas" from Oculum-Verlag, and planetarium programs for the PC, like the program "Stellarium", where the three rings of the TELRAD are already drawn or can be displayed around the interesting celestial objects. This makes finding these celestial objects a real walk.FEATURESTELRAD projection finderIlluminated rings of 4 degrees, 2° and 0.5° in the skySee the complete starry sky without magnificationEasy installation and useCan be installed on nearly every telescopesBase with quick release coupling included Powered by two AA batteries (not included) Very long battery life because of LED technologySCOPE OF DELIVERYTELRAD viewfinder with projector and battery compartment TELRAD base with quick-release coupling for the viewfinder Adhesive tape for attachment to telescope

Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 90mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 90mmFits to outer telescope tube diameter from 90 to 160mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter