EXPLORE SCIENTIFIC 68° Ar Eyepiece 28mm (2")

These eyepieces with their huge apparent field of view not only gave the observer a panoramic visual experience, but they relax the eye so the observer could pay attention to subtle details for extended periods. These ultra-wide angle eyepieces played a critical role in the military for aiming at targets, and their long eye-relief counterparts helped reduce eye injury from recoil.Each 100° Series Argon-Purged Waterproof eyepiece is internally sealed and purged with inert, dry argon gas to prevent internal fogging, to halt the intrusion of fine particulates and fungus. This also maximizes the life of the internal coatings.To make sure, every 100° eyepiece is tested by submerging them down to 1 meter of water for 30 minutes.All 100° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.

BRESSER 10mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 10 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

EXPLORE SCIENTIFIC CLSWHAT'S INCLUDED:

With the set of the BRESSER Messier NT-203/1000 Telescope and the EXOS-2 PMC-Eight GoTo mount, you are perfectly equipped for impressive planetary and deep-sky observations or photography. The optics, with a parabolic primary mirror, large aperture, and long 1,000-mm focal length, reveal fine details on planets and fascinating structures in distant galaxies. Additionally, you can admire the surface of our own star during the day with the secure solar filter. The powerful GoTo mount and app ensure precise tracking during your observations and astrophotography sessions, as well as easy orientation and navigation in the sky. The Telescope The BRESSER Messier NT-203 Telescope is equipped with a parabolic primary mirror, allowing observations that were unattainable in this price range just a few years ago. Modern manufacturing technology enables you to track the shadow of Jupiter's moons on the planet itself; the range of structures and details on Jupiter's surface is breathtaking. The BRESSER Messier NT-203 not only excels at planetary observation: Discover structures in distant galaxies and be fascinated by the filaments of emission nebulae in the vastness of the Milky Way. With the BRESSER Messier NT-203 Telescope, you can observe the remnants of exploded giant stars and the birthplaces of new stars. During the day, you can safely observe sunspots, eclipses, and planetary transits with the secure solar filter. (Warning: Never point the telescope at the sun without a solar filter!) Let yourself be surprised by the wonders of the universe with this exceptionally large device! The Mount The EXPLORE SCIENTIFIC EXOS-2 PMC-Eight GoTo Mount is equipped with a modern and highly precise GoTo control system. It consists of a robust Wi-Fi controller unit that provides all necessary interfaces. The NEMA-11 stepper motors are directly connected to this unit via cable, and an ST-4 compatible autoguider port is also included. The control system supports micro-stepping for precise tracking. Intuitive operation via app and graphical star map The ExploreStars app, developed specifically for the PMC-Eight system, impresses with a very well-designed, intuitive graphical interface. The current alignment stars for initializing the control and all sky objects in the database are displayed as a star map with additional text information. All of these objects can be conveniently viewed and selected. Powerful controller unit with Open GoTo for customization The heart of the controller unit is a completely autonomous 2-channel multi-processor with 8 CPUs and a Wi-Fi Ethernet 10/100 adapter with IP functionality. This allows remote control via browser, ASCOM, app, or serial connection. The Open GoTo system also enables custom firmware to be written and uploaded to the controller unit, allowing individual customization of the device's functions and the creation of your own object lists, etc. Polar scope included The pre-assembled polar finder scope included in the set enables a quick and precise polar alignment, allowing long exposure times without unwanted star trails. The integrated LED illumination unit further enhances the comfort of using the polar finder. FEATURES TELESCOPE Type: Reflector telescope Mirror diameter: 203 mm / Focal length: 1,000 mm / F/5 Maximum useful magnification: 406x Telescope for night and solar observation High-quality Hexafoc focuser with 2.5" free inner diameter Diffraction-limited optics with parabolic primary mirror 8x50 finder with crosshair eyepiece Optimized finder bracket for comfortable viewing Handle for easy transport with integrated camera holder (tripod thread screw) Smartphone adapter for sky navigation included Prism rail with stainless steel clamp surface (44-mm universal dovetail for GP/EQ5/LXD75) T2 adapter for SLR cameras (optional T2 ring required) 50.8 to 31.7 mm adapter with integrated T2 adapter (optional T2 ring required); with brass compression ring FEATURES MOUNT Powerful PMC-8 Open GoTo system User-friendly and visually appealing ExploreStars OpenGoto app Wi-Fi control via tablet, notebook, or desktop PC with at least a 7" display and Wi-Fi functionality (not included) Compatible operating systems: WIN8.1, WIN10/11, iOS, or Android 4.4 and higher Classic control via direction keys or joystick for guiding, centering, correcting, and moving via touchscreen Intuitive 2-star and 3-star alignment for initializing GoTo control Multi-processor microcontroller with 8 CPUs (processor cores) Micro-stepper motors NEMA-11 Highly precise and quiet belt drive ST-4 compatible autoguider port ASCOM drivers available, also supports pulse guiding Possibility to create your own firmware and object lists and load them into the PMC-8 GPS compatible / settings depend on the computer or tablet used Powered by 12-volt DC, with a maximum current draw of 1.6 amps under full load SCOPE OF DELIVERY Optical tube with Hexafoc focuser Solar filter 26 mm Super Plössl eyepiece (31.7 mm / 1.25") Integrated 31.7 mm and T2 adapter Prism rail with stainless steel clamp surface Adapter for 50.8 mm (2") eyepieces Rotating star map Solar filter Tube rings with carrying handle and camera holder 8x50 finderscope Smartphone adapter for navigation Astronomy PC software Stellarium (via download) EXOS2-GT mount with Open GoTo PMC-8 Stainless steel tripod with built-in bubble level Counterweight 2 x 4.5 kg Polar finder with illumination unit Power supply 12 volts / 2 amps ExploreStars app via software download Instruction manual

Save pictures and videos from your microscope or telescope directly in Full HD resolution on your PC. The BRESSER MikrOkular Full HD is an eyepiece camera that can be used directly instead of the eyepiece of your telescope or microscope. Adapters for various devices (all common eyepiece dimensions from different manufacturers) and multilingual recording software for Windows are already included in the scope of delivery. With this camera you can document your microscope or telescope observation or share it with others. Ideal for hobby, school, study and work. The camera can take pictures of the moon and the bright planets on the telescope. In microscopy, the camera is mainly used for shooting in brightfield and incident light. FEATURESmetal housing, mini USB socketresolution 1920 x 1080 Pixel, Full HDPixel size: 3x3 µm, sensor size: 5.86 x 3.28 mm23,2mm barrel, integrated UV/IR blocking filter30mm; 30,5mm adapter for various microscopes and telescopes included31,7mm (1,25") adapter for telescopes includes with thread for 1,25" filtersmultilingual recording software for Windowsimage format jpg, tif, pngvideo format mp4 SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 2nd generation orAMD FX or Ryzen CPUinternet connection for software downloadUSB 2.0 SCOPE OF DELIVERYcamera module incl. dust capUSB-cableCamLabLite-Software as a download link, language versions German, English, French, Turkish, Russian, Polish, Indonesian, ChineseUsers Guide included in the software (German, English)Adapters 30mm, 30,5mm, 31,7mm (1,25”)