Skip to main content Skip to search Skip to main navigation

EXPLORE SCIENTIFIC 82° Ar Eyepiece 6,7mm (1,25") (Refurbished)

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General safety instructions DANGER Risk of eye injuries! Never look directly at the sun or near the sun through this device. There is a risk of blindness! Children should only use the device under supervision. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! FIRE HAZARD! Do not expose the device – especially the lenses – to direct sunlight! The light concentration could cause fires. RISK of material damage! Do not dismantle the device! In case of a defect, please contact your dealer. They will contact the service center and may send the device in for repair. Do not expose the device to temperatures above 60°C!
  • Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
  • Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
  • Do not expose the device to high temperatures.
Skip product gallery

Customers also bought

EXPLORE SCIENTIFIC 82° Ar Eyepiece 14mm (1,25")
Explore Scientific 82° Series™ extreme wide field eyepieces are optimized to produce high contrast, high resolution, and superior flat field characteristics. The visual effect of these eyepieces with their long eye-relief and their 82° apparent field is truly a full-immersion experience. Your eye is relaxed, allowing you to easily use the "averted vision" technique to study faint details across a huge field-of-view. The 82° Series eyepieces come with a twist-up rubber eye-guard that raise to the desired height for the comfort of the observer, and as experienced astronomers know, eye comfort is critical when trying to observe at the visual limits of the telescope. To keep internal reflections to a minimum, all internal surfaces of the eyepiece barrel are flat black, as well as the edges of the lenses themselves to minimize the scattering of light within the lenses themselves. All 82° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.

Currently unavailable

€185.00*
%
BRESSER Messier 12" Dobson Telescope
The new BRESSER Messier 12" Dobson enhances this well-liked telescope series while providing great portability due to its lightweight fibreglass telescope tube. Despite its low price, it offers a variety of functions as well as quality that you would not find in considerably more expensive devices. Thanks to the powerful telescope aperture of 305 mm, you get significantly more light-gathering capacity than with the smaller models and are therefore not limited to observing the moon and the planets of our solar system - you can already look far out into the universe and observe globular clusters, nebulae and galaxies with even greater brightness. Details become visible in most deep-sky objects: globular clusters are clearly resolved into individual stars and gas nebulae, which can only be guessed at with smaller devices, show structure. The device is unrivalled in its versatility: The excellent large Hexafoc focuser has an aperture of 65 mm - so there is no noticeable obstruction from the focuser tube even with large wide-field eyepieces. Thanks to the large altitude wheels, even these heavier eyepieces are held effortlessly. And if a particularly large number of accessories is attached, such as a binocular attachment, then the entire tube can be moved inside the tube clamps - and everything is balanced again in a flash. The unrivalled rigidity of the focuser makes focusing easy - so photography with this tube is also possible. This is another strength of this universal telescope: if you want to take photos, you can simply unscrew the altitude wheels from the tube and attach it to an equatorial mount using a dovetail bar - so there's nothing standing in the way of astrophotography. An optional 10:1 gear reduction for the focuser is available for the highest demands. Considering that the focuser is the most frequently used part of the telescope, the use of the Hexafoc in this device is a quantum leap for this price range. With the initial equipment, you can start observing immediately - a 6x30 finder and a 25 mm SPL eyepiece are included in the scope of delivery. Various other viewfinder types can also be retrofitted using the 2 new hybrid viewfinder shoes (Art. 0620158) supplied as standard. In addition, the new 12" BRESSER Messier makes it easy to transport the device as compactly as possible - the rocker box can be dismantled in a few simple steps because the parts are assembled with metal quick-release connectors. This quickly turns a bulky rocker box into a handy flat package of individual parts. A telescope whose versatility, performance and user-friendliness set new standards in this price class. Includes a high-quality objective solar filter for safe observation of sunspots, eclipses and planetary transits. A BRESSER premium telescope for night and solar observation. NOTE: Please note that "Newtonian" reflector telescopes are very good for astronomical observations in the starry sky, but are not well suited for nature and landscape observations during the day. We therefore recommend BRESSER refracting telescopes for nature and landscape observations. FEATURESType: Reflector telescope Telescope for night and solar observation Lightweight but very stable GRP telescope tubePrimary mirror diameter: 12" (305 mm) parabolic main mirror Focal length: 1,525 mm Aperture ratio: f/5 Maximum useful magnification: 610x Theor. resolving power: 0.45 arcseconds Easy to balance the tube by sliding it inside the tube rings Visual limiting magnitude: 14.5 mag Tube: GRP tube with adjustable tube rings and aluminium altitude bearings Focuser: 2.5" HEXAFOC focuser with 2" and 1 1/4" adapter Shifting-free focusing even with heavy accessories Secondary mirror bracket: very thin 4-arm steel spider Tube rings and altitude wheels made from aluminumDifferent sized adjustment and counter screws on the mirror cell Use of the optics also on EQ mounts (with optional dovetail bar) Mount: Dobsonian system Dismantlable rocker box Accessory tray for one 2" and two 1 1/4" eyepieces, mounted on the front side Eyepiece: BRESSER Super Plössl 25 mm (1 1/4") Viewfinder: 6x30 viewfinderHybrid viewfinder shoes (Art. 0620158) included (2 pcs)Tube weight without accessories: 16 kgTube weight with accessories: 18.9 kg Rocker box weight: 14.8 kg Total weight: 33.7 kg Overall dimensions: 60 x 60 x 163 cm SCOPE OF DELIVERY Tube with Newtonian optics Aperture solar filter 6x30 viewfinder Hybrid viewfinder shoes (2 pcs)25 mm Super-Plössl eyepiece (Ø 31.7 mm / 1.25") 1 extension tube 37.5 mm for 2.5" Hexafoc 1 eyepiece adapter Ø 31.7 to 50.8 mm 2 tube rings 2 altitude wheels Rocker box with 2 base plates and mounting material (disassembled for self-assembly) Shipping dimensions Box 1: 150 x 53 x 50 cm - 24 kg Shipping dimensions Box 2: 61 x 61 x 24 cm - 17 kg

Available

€998.00* €1,265.00* (21.11% saved)
Skip product gallery

Customers also viewed

EXPLORE SCIENTIFIC Zero X Field Flattener 2''/M48 for ED80, ED102 and ED127 APO
Field flattener without reduction factor for Explore Scientific ED80 , ED102 and ED127 APO Refractors The imaging plane of many telescopes is not flat but curved. This means that only the area in the centre is perfectly focused - the edge becomes blurred. The human eye can usually compensate for this image property, but a camera shows increasing blurriness towards the edge of the image field. The Explore Scientific Zero X field flattener eliminates the field curvature in many telescopes with a focal length of approx. 480 to 952 mm. The Zero X field flattener was calculated and developed for Explore Scientific ED80, ED102 and ED127 apochromats with focal ratios of F=6.0 and F=7.5. The image sharpness at the edge is dramatically increased. The stars appear round and no longer distorted - a clear benefit for the whole image aesthetics. The Zero X image flattener can be used not only with Explore Scientific Apos, but also with many other Apos. This flattener does not change the focal length of the telescope. Correction for up to full-frame camera sensors (24x36mm) The Explore Scientific Zero X image flattener has been developed due to the rapid development of ever larger camera sensors. With it, there is finally a field flattener available that illuminates and corrects the field of view for full-frame camera sensors up to 24x36 mm. How to use the Zero X field flattener with M48 thread connection This field flattener has a 2 inch (50.8 mm) plug-in connection on the telescope side, with which it is inserted into the telescope instead of an eyepiece or star diagonal mirror. On the camera side, there is a standardised M48 x 0.75 mm connection thread. This M48 connection thread offers a larger free inner diameter than the usual T2 (M42) thread and prevents vignetting when using large camera sensors. With an optionally available and camera-specific adapter ring, a DSLR camera can be connected to it. The working distance is already set at 55 mm. Of course, mirrorless cameras or special astro cameras can also be used with the M48 thread connection. For this, the appropriate M48 spacer sleeves or adapters are additionally required to set the right working distance of 55 mm. This must always be done with every corrector or field flattener so that the best possible field flattening is achieved.Filter thread on telescope side availableThe telescope-side 2.0 inch plug-in sleeve has an M48x0.75 filter thread (internal thread). Individual 2.0 inch colour or nebula filters can be inserted here to increase the contrast of the images.FEATURESField flattener for Explore Scientific ED80, ED102 and ED127 APO telescopesRemoves field curvature from telescopesProduces round stars even at the edge of the image fieldImage sharpness at the edge is drastically increasedA clear benefit for the whole image aestheticsCorrection of field curvature for up to full-frame camera sensors (24x36 mm)Image field flattener without reduction factorOn the telescope side with 2 inch (50.8 mm) plug-in connection and M48x0.75mm filter threadCamera side with large M48 threaded connectorWorking distance of 55 mm between field flattener and camera sensorFor telescopes with a focal length of approx. 480 to 952 mmOptimised for telescopes with focal ratios from F=6.0 to F=7.5Can also be used for various other APOsFully multi-coating on all lens surfacesHousing made of lightweight aluminium, black anodisedAluminium dust cap for M48 threadSCOPE OF DELIVERYZero X field flattener (1 piece)Dust caps

Available

€179.00*
%
EXPLORE SCIENTIFIC 52° LER Eyepiece 20mm Ar
Solidly in the mid-magnification range for most amateur telescopes, the 20mm is a true workhorse for visual observers. If you love deep sky observing, eyepieces in this focal length range not only give healthy increases in magnification, but the contrast enhancement of giving a darker background sky can make all the difference of how galaxies and nebulae appear under suburban skies.Comfort, Quality, Value. The Explore Scientific 52° LER Series mid-range focal length eyepiecesare excellent flat-field multi-element oculars that can transform your visual astronomy experience. With an apparent field of view of 52 degrees, these eyepieces offer incredible value in a very nice eyepiece. Expect exceptional quality and value versus a comparably priced Plossl. These eyepieces are the choice for observers wearing glasses - with excellent performance and durability. The rubber inlet and the foldable eyecups make handling and using in the field easy. The patented EMD"-coating produces high contrast images and prevents reflexes and ghosting. The argon purging effectively prevents internal fogging, and you don´t have to deal with dirt, fungus or cleansing fluids getting between the lenses. The eyepieces are sealed - this makes sure you will be able to enjoy these eyepieces for many years to come.SPECIFICATIONSLarge eye distance, large field and great image sharpnessExcellent viewing position for people with glassesExcellent field sharpness even with fast optics52° apparent field of viewArgon-purging prevents internal fogging, the sealing facilitates cleaningPatented EMD-coating to maximize contrastBlackened lens edges to avoid reflexesAll eyepieces of this series are parfocalStainless steel barrel with conical security cutoffDust covers and protective bag includedSCOPE OF DELIVERY52° EyepieceDust coversProtective bag

Available

€63.00* €79.00* (20.25% saved)
BRESSER 5mm Plössl eyepiece 31,7mm/1,25"
BRESSER 5mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 5 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

Currently unavailable

€29.00*
%
EXPLORE SCIENTIFIC 68° Ar Eyepiece 24mm (1,25")
With the introduction of the 68° Series we are pleased to make two important improvements in eyepiece manufacture, the first being 15 layer Enhanced Multi-layer Deposition (EMD™) coatings on all glass-to-air surfaces to gain maximum contrast, and waterproofing the eyepiece with the use of Argon gas purging instead of standard Nitrogen gas. Although Nitrogen is a fine choice that will last for many years, Argon is a larger molecule that maintains its protective properties over a wider range of temperatures, and is even more resistant to diffusion thereby further extending the protective waterproof environment of the eyepiece body. Through computer-optimized design, a careful selection of optical glasses, and enhanced multi-layer deposition coatings, the Explore Scientific 68° Series™ eyepieces produce long eye-relief and ensure high image-correction, a flat field, and high contrast across the entire image field. An excellent choice for those who make extended visual studies of detail with subtle variations of brightness, and for those who must wear glasses while observing. All 68° Series eyepieces are fully EMD (Enhanced Multi-Layer Deposition) coated and edge-blackened to produce superior contrast.

Available

€119.00* €185.00* (35.68% saved)