EXPLORE SCIENTIFIC Adaptor 3" 0.7x Corrector to M68 x 1.0mm

Adaptor 0510360 to M68x1mm female thread

  • Adaptor 0510360 to M68x1mm female thread
  • Connects the 0.7x Reducer with M68x1 devices
  • Material: black anodized aluminium

€69.00*

Available, delivery time: 1-3 days

Product number: 0510367
EAN: 4007922037820
WEEE-Reg.-Nr.: DE 34323861

With BRESSER, you can enjoy a smooth introduction to the vast world of astronomy. Our detailed information ("Telescope Guide") provides valuable tips for beginners—but even experienced astronomers can use the information we provide (e.g., tables for the geographical latitude of all major world cities) as a reference.

Here is the table of contents of the comprehensive BRESSER Telescope Guide:

Sky Guides by Bresser

The Sky Guide provides comprehensive information on constellations, planetary positions, and astronomical events – perfect for planning your observations and delving deeper into astronomy.
Visit the guide directly here to make the most of your observations!
Product information "EXPLORE SCIENTIFIC Adaptor 3" 0.7x Corrector to M68 x 1.0mm"
Connects accessories with the M68x1 male thread to the imaging side of the 0.7x Reducer/Corrector 0510360.
Batteries required: 0
Colour: black
Extended warranty (years): 10
Material: Aluminium
Net weight (without access.) (g): 100
Total height (mm): 11
Total length (mm): 80
Total width (mm): 80

Produkt- und Sicherheitshinweise


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General warning instructions DANGER! RISK of bodily injury! Never look directly at the sun or near the sun through this device. There is a risk of blindness! Sharp-edged and pointed tools are often used with this device. Therefore, store this device and all accessories and tools in a place inaccessible to children. There is a RISK of injury! Children may only use the device under supervision. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! FIRE HAZARD! Do not expose the device – especially the lenses – to direct sunlight! The light concentration could cause fires. NOTE! Do not dismantle the device! In case of a defect, contact your dealer. They will contact the service center and may send the device in for repair. PRIVACY PROTECTION! The telescope is intended for private use. Respect the privacy of others – for example, do not use this device to look into apartments!

Accessories

EXPLORE SCIENTIFIC 3" 0.7x Reducer/corrector
The EXPLORE SCIENTIFIC 3" 0.7x Reducer/corrector, reduces a compatible telescope's focal length by a factor of 0.7x (for around f/8) and 0.8x (for around f/10) respectively. The reducer/corrector not only reduces the focal length but also flattens the field. Although originally developed for the Explore Scientific ED-APOs 127mm and 152mm, the reducer can be used with many systems - for example with the Explore Scientific ED-APOs 102mm and 165mm (please note, this will not work on the Explore Scientific 80mm ED Apo refractors though). With certain telescope focal lengths, a slight restriction of the correction at the edge of the image field can be expected when using full-frame sensors. This unit comes with 3" barrel adaptor for direct focuser thread M54x0.75 (the standard focuser thread of the Explore Scientific Essential series of ED Apos) and T2 camera adaptor. This reducer/corrector features a free aperture of 65mm, so that it can be used even with cameras that have a large sensor - if the telescope allows for this. Note: As previously mentioned, this Reducer/corrector comes with a screw on ring, which fits the standard focuser thread of the Explore Scientific Essential series of ED Apos. For telescopes which are equipped with the 2.5" HEX Focuser, the optional screw-on adapter part no: 0510366 is needed. Other telescopes, not in the Explore Scientific range, with standard 2" push-fit focusers will need the Explore Scientific 2" Adaptor for 3" Corrector - part no: 0510364 to get this reducer correctly fitted. SPECIFICATIONS Reduces the focal length by 0.7x at f/8 Flattens the field for astrophotography Developed for ED127 und ED152 APO telescopes Also fits Explore Scientific ED102 and ED165 telescopes - and others Free aperture: 65mm Inner thread for telescope adaption: M76x0.75mm Outer thread for camera adaption: M72x0.75mm 3" focuser barrel adaptor included Adaptor for Explore Scientific focuser M54x0.75mm included T2 camera adaptor M42x0.75mm included Diameter: 78.5mm; length: 100mm Length without adaptors: 52mm Weight without adaptors: 530g What's Included Reducer/Flattener 3" focuser barrel adaptor Adaptor for Focuser M54x0.75mm T2 camera adaptor M42x0.75mm Dust caps

€419.00*

Customers also bought

%
Vixen Dew Cap Heating
The Vixen dew cap heater prevents your optics from fogging up due to dew.A must-have accessory for cold and damp nights.FEATURES Consumption: 16.2 Ohm (12 V, 8.9 W) Dimensions: 655 mm long heater with 2.2 m cable Connection: 2.1 socket with medium-negative polarity Weight: 120 g DELIVERY CONTENT Battery box Vixen dew cap heater

€92.00* €115.00* (20% saved)
%
EXPLORE SCIENTIFIC Camera Dovetail Kit for iEXOS-100 Mount
Universal mounting rail for mounting a photo camera on an EQ mount with Vixen GP mount for astrophotography. The EXPLORE SCIENTIFIC camera dovetail rail is made of die-cast aluminium. The dovetail-shaped mounting rail is 45 mm wide (similar to the Vixen dovetail style) and 280 mm long. The matt black anodized surface has a laser engraved scale on one side with a fine graduation with 2 mm increments. This makes it easier to determine the center of gravity when placing the camera on the mounting head. To protect the clamping surface there is a stainless steel clamping plate on the opposite side. The dovetail plate is equipped with rubber inserts at 3 positions. This allows a secure mounting of the camera equipment and prevents unintentional slipping and twisting. The mounting rail has a screw fastening with 1/4 inch photo thread, which is suitable for almost all commercially available camera systems. The screw attachment can be used in 3 different elongated hole positions to adjust a perfect balance. In addition, an adapter from 1/4 inch to 3/8 inch photo thread is also included, so that ball heads with the larger thread version can also be used directly. The camera mounting rail weighs only 250 grams. Suitable for all EXPLORE SCIENTIFIC and BRESSER mounts and also mounts of other brands that accept the popular Vixen-GP dovetail rail. FEATURES Universal camera mounting rail Dovetail with 45 mm width Length 280mm; weight 250 grams Suitable for EQ mounts with Vixen GP dovetail Camera mounting screw with 1/4 inch photo thread Thread adapter 1/4 inch to 3/8 inch Laser engraved scale with 2 mm fine graduation Stainless steel clamping plate Rubber inserts against slipping and twisting 3 elongated holes for mounting the camera SCOPE OF DELIVERY Camera mounting rail Mounting screw 1/4 inch Thread adapter 3/8 inch

€55.00* €69.00* (20.29% saved)

Customers also viewed

%
EXPLORE SCIENTIFIC 2" Adaptor for 3" Corrector
Connects the 0510360 EXPLORE SCIENTIFIC 3" Corrector/Reducer to optical tubes with a 2" focuser.

€52.00* €64.90* (19.88% saved)
%
EXPLORE SCIENTIFIC T2 Reduction Adapter M48x0.75 to M42x0.75
For connecting T2 camera accessories with the smaller M42x0.75 thread to the larger M48x0.75 thread. Also ideal for adapting 2 inch colour and nebula filters between camera and telescope. FEATURES Connection of accessories with different T2 thread sizes Adaptation of 2 inch color and nebula filters between camera and telescope Internal thread M48x0.75 mm (large T2 thread) External thread M42x0.75 mm (small T2 thread) Free inner diameter of 39.0 mm Outer diameter is 50.65 mm (2 inches) Black matt anodized aluminium Weight is only 10 grams SCOPE OF DELIVERY Reduction adapter (1 piece)

€20.00* €24.90* (19.68% saved)
NATIONAL GEOGRAPHIC 256-Colour and RC Weather Station 5-in-1
The new design of the National Geographic Colour Display Weather-Station impresses with an excellent performance and excellent value for money. The weather station combines a compact design with a comprehensive information service. The new, unique colour display offers clear information and an ideal overview in an elegant design. The multifunctional outdoor sensor with its very compact design can be set up in almost any location. A pipe clamp and screws for attachment to masts (pipe diameter approx. 25-33 mm) as well as a stand for level mounting are already included in the scope of delivery! The 5-in-1 outdoor sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature and amount of precipitation to the base station. On the display of the base station not only these values, but also a variety of history data can be read. The latter enables the internal storage and evaluation of the measurement data over a period of 24 hours. From the collected measurement data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, which is shown on the display by six graphic symbols. An alarm can be individually programmed for maximum and minimum values, which triggers both an acoustic and a light signal when the specified value is reached. For outside temperatures from -3 °C, a special frost/ice warning alarm can also be activated. A poor indoor climate can pose health risks, especially for children and elderly people. The National Geographic Weather Station also offers a smart feature for this purpose. The room climate indicator always informs about the room climate by means of a symbol.PROPERTIES5-in-1 Multisensor for outdoor useInstallation material for outdoor sensor included in deliveryInside temperature (°C/°F) and humidityOutside temperature (°C/°F) and humidityWind direction and speedGraphical weather trendsDisplay (12 hours)Beaufort-Index (scale for classification of wind forces)Precipitation with history (day/week/month)Air pressure with history (24 hours)Heat-IndexDewpointRadio controlled time and date settingMoon phasesAlarm functionIce/freezing warningMin.-/Max. value memory (up to 24 hours)LED backlight, amber DELIVERY SURFACEBase station with pedestal5-in-1 Multisensor with mounting materialOperating instructions3 pcs. of LED backlight for operation. AA batteries required (not included)

€159.00*
BRESSER Barlow Lens 2x 1.25"
BRESSER Barlow Lens 2x 1.25”Category: Spare Part for Carbon Look Telescope Series Description: The BRESSER Barlow Lens with 2x magnification and a barrel diameter of 1.25 inches (31.7mm) enables double magnification for more detail. Suitable as an accessory and spare part for the BRESSER Carbon Look Telescope series.

€12.90*
Vixen Reducer HD
Above-average contrast The Reducer HD features the optical coating that was developed by Vixen for our high-end VSD100F3.8 astrograph. The AS coating provides light transmission of up to 99.9% per lens surface. The special matte surface in the interior also minimizes ghosting, light loss and lens flares. Reducer HD in combination with SD telescopes The Reducer HD can be used on telescopes from the SD series (SD81S, SD103S and SD113S) with the SD Flattener HD Kit (item #37246) . The Reducer HD reduces the focal length by a factor of 0.79x (f/7.7 to f/6.1) and delivers a razor sharp image over the entire 44 mm image sensor surface on DSLR cameras. Reducer HD in combination with AX103S and VC200L telescopes In addition to the SD telescopes, the Reducer SD is also compatible with the AX103S and VC200L telescopes. With these telescopes, the focal length is reduced by a factor of 0.77x.FEATURESUp to 99.9% light transmission per lens surfaceReduces the focal length by a factor of 0.79xAlso suitable for full-frame DSLR camerasFor the ED/SD 81S, 103S, 115SAS coating with light transmission of up to 99.9% DELIVERY CONTENTVixen Reducer HDDust caps

€349.00*
EXPLORE SCIENTIFIC BT-120 SF Giant Binocular with 62° LER Eyepieces 20mm
Giant binocular for observing the starry sky, nature and landscape. Observe the beauty of the starry sky at night and distant objects in nature during the day. Globular star clusters, glowing gas nebulae, the moon with its craters and even planets can be observed wonderfully on a clear night. But also all other distant things in nature and landscape, even ships and airplanes can be seen in detail. With the all-round binoculars of the EXPLORE SCIENTIFIC BT series, you can get up very close. Thanks to the large, light-gathering lenses and the professional coatings on all lens surfaces, these binoculars produce bright and brilliant images even at night and at twilight, providing a special viewing pleasure. The comfortable 45 degree viewing angle allows fatigue-free use, even when the binoculars are tilted upwards towards the zenith.  A large binocular can also be called a double refractor telescope Binoculars such as these can really be described as a double telescope.  In this configuration, the full light gathering power of one single telescope is available to each eye. Experience a whole new dimension of observing as a consequence. Objects are reproduced almost vividly in these binoculars and observing with both eyes is a very relaxing experience. Last but not least, this comfortable way of observation increases the recognition of the finest details (particularly in fainter deep sky targets) and effectively prevents eye fatigue. Extremely robust binoculars with magnesium housing, sealed and filled with nitrogen  The BT series binoculars are designed for tough outdoor use. The IPX6 sealed and nitrogen-filled design effectively prevents fogging of the internal optics even under difficult weather conditions. The very light magnesium housing saves weight and makes it easy to handle. Two EXPLORE SCIENTIFIC 20mm eyepieces of the 62 degree LER series already included. EXPLORE SCIENTIFIC is an established manufacturer of extremely high-quality eyepieces in the astronomy scene. An optical system is only as good as its weakest component. Therefore we have decided to deliver these giant binoculars with a pair of quality eyepieces of the 62 degree LER series. With an apparent field of view of 62 degrees and a focal length of 20mm, the BT-120 binoculars produce a 33x magnification. Thus these wide angle eyepieces offer a very good overview (field of view 1.8 degrees) at moderate magnification. The large interpupillary distance of these LER (long eye relief) eyepieces of 15mm and soft silicone eyecups, which can be turned inside out, also guarantee a comfortable and relaxed view. For astronomy, a flat and sharp image field is advantageous and offers a particularly impressive viewing experience even during the day. Due to the waterproof design and the argon filling, these eyepieces are absolutely durable and easy to clean. Interchangeable eyepieces with 1.25 inch / 31.7mm plug-in diameter Adjust the magnification and field of view to your individual needs and choose from a wide range of available eyepieces. All eyepiece types with a plug-in diameter of 1.25 inch / 31.7mm can be used with the binoculars of the BT series. Especially recommended are EXPLORE SCIENTIFIC eyepieces of the 62 and 82 degree series with focal lengths from 8 to 26mm (see item No. 02188xx and 02196xx). The magnification can be varied from 25x to 75x (focal length binoculars : focal length eyepiece = magnification). The eyepieces are held in the binoculars by a precise brass compression ring clamp and guarantee a tilt free position.  Use of colour and nebula filters for astronomical observations Increase the contrast and visibility of objects and details by screwing the corresponding filters directly into the thread of the eyepiece sleeves. The use of colour and nebula filters must of course always be done in pairs. Suitable are all EXPLORE SCIENTIFIC screw filters with 1.25inch / 31.7mm diameter (see item No. 03102xx)  Comfortable 45 degree view and helical single focus The 45-degree viewing angle allows a relaxed observation position even when the binoculars are tilted strongly. Also the individual interpupillary distance can be adjusted in a range from 54 to 76mm. With the fine helical individual focusing, precise focusing is achieved effortlessly. Extendable dew caps The integrated dew caps can be removed in high humidity and cold conditions. This avoids fogging of the outer objective lenses and effectively shields additional control light coming in from the side. Integrated carrying handle A metal carrying handle located at the center of gravity facilitates transport and ensures a secure hold during tripod assembly. Suitable tripods and tripod connectionWhen using these large binoculars, a sturdy photo tripod with an appropriate load capacity is highly recommended. The connection is made via two 1/4 inch or one 3/8 inch threaded holes (standard photo tripod thread) in the tripod adapter of the binoculars. The ideal solution is to use the optional available EXPLORE SCIENTIFIC U-Mount with field tripod (item No. 0114300). This is specially designed for the large binoculars of the BT series and carries these binoculars absolutely securely. The excellent support mechanism, with adjustable friction in both axes allows easy moving and tracking. The binocular position is kept stable depending on the adjusted friction intensity. Vibrations are reduced to a minimum by the massive construction of the U-Mount and the large stainless steel tripod. Even at high magnification there are no discernable vibrations and this allows the finest details to be observed in a chosen target.FEATURES Large binoculars for observing the starry sky, nature and landscape Observe globular star clusters, glowing gas nebulae, the moon with its craters and even planets Also wild animals, ships and airplanes can be seen in detail Highly light gathering lenses produce a bright and high-contrast image All-round binoculars, but especially suitable in twilight and at night The comfortable 45 degree viewing angle allows fatigue-free use One complete lens telescope with the full light gathering power is available per eye Extremely robust binoculars with magnesium housing, sealed and filled with nitrogen Two EXPLORE SCIENTIFIC 20mm eyepieces of the 62 degree LER series already included 33x magnification and an apparent field of view of 62 degrees, true visible field of 1,8 degreesLarge interpupillary distance of 15mm to the eyepiece lens for comfortable viewing Eyepieces interchangeable and with standardized plug-in diameter of 1.25 inch / 31.7mm The magnification can be adjusted with optional eyepieces from 25x to 75x Precise brass eyepiece compression ring clamps for tilt-free fitColor and nebula filters can be used for astronomical observations Extendable dew caps prevent fogging of the outer objective lenses and stray light Integrated carrying handle facilitates transport and mounting on the tripod Tripod connection via two 1/4 inch or one 3/8 inch threaded holes (standard photo tripod thread) Tripod recommendation: EXPLORE SCIENTIFIC U-mount with field tripod (Art.No. 0114300) Objective type: Air spaced achromatic lens (2 elements/ 1 group) Coating: full multilayer coating on all optical surfaces Aperture, focal length and aperture ratio: 120mm / 660mm / F=5.5 Sealed to IPX6 standard and nitrogen filled: yes / yes Close focus distance: 35 meters Eyepiece mount diameter: 1.25'' / 31.7mm Adjustable interpupillary distance: 54 to 76 mm Helical single focus: yes BAK-4 prism system for a bright and high-contrast imageDimensions and weight of binocular: 654 x 290 x 156mm, 8.3kg Housing colour of binocular:  white What's included Giant binocular with carrying handle (without tripod)Eyepieces ES 20mm 62 degrees LER Series (2pcs)Precisely fitting foam insert for transport Dust covers for objectives and eyepiece sockets Instruction manual

€2,199.00*
BRESSER Accessory Tray Tripod ST-2 for EXOS-II
BRESSER Accessory Tray Tripod ST-2 for EXOS-II Category: Spare Part suitable for Telescope Mounts & Controls Description: The practical accessory tray for the ST-2 Tripod of the EXOS-II Mount provides space for accessories such as eyepieces or filters. Easy mounting and secure attachment are only possible with the central spindle (Art. 4901660). Compatible with the BRESSER EXOS-II Mount.

€24.90*