EXPLORE SCIENTIFIC Deep Sky Astro Camera 1.7MP

BRESSER Full HD Deep Sky Camera with autoguider: a great camera for different types of astrophotography and for autoguiding. Not only suitable for planets, but also for deep-sky objects such as galaxies, nebulae and star clusters. Dedicated ToupSky Astro Imaging software supports video preview, video recording, video processing, image capture and processing, dark field correction and raw data output. Easy to use, but with professional results. One of the main features of the new backlit SONY IMX290 CMOS sensor is its high light sensitivity, which makes it possible to detect deep-sky objects without active cooling. SONY has increased the quantum efficiency at 533 nm wavelength up to 77%, which is much better than other CMOS sensors have been able to achieve in the past. Connect this camera to a guidescope and attach the camera's built-in ST-4 port, directly to your telescope's equatorial mount guide port and autoguide - using many popular audioguiding programs (PHD, Guidedog and more). Autoguiding enables you to take accurate pictures with long exposure times of several minutes. Thanks to the extra light-sensitive camera, you now always have a suitable guide star to hand, even using short exposure times. An ST-4 protocol connection cable is also included. Simple automatic tracking at its best. You can use this camera with all guiding telescopes, or off-axis guiders that accept a 1.25 " tube, 1.25" filter thread (M28.5x0.6) or C-mount adapter thread (1 "x1 /32"). IMPORTANT NOTES: This is not a stand-alone guider camera. You always need a Windows 10/11 computer to take pictures and for autoguiding. The autoguider software is not included. You can use PHD2 Guiding, Guidedog, Metaguide, Guidemaster (freeware) or AstroArt, MaxIm DL (paid). DOWNLOAD PHD2-Guiding: https://openphdguiding.org/ DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html DOWNLOAD latest camera software and drivers: https://www.touptek-astro.com/downloadsDownload INDI Driver: https://github.com/indilib/indi-3rdparty/tree/master/indi-toupbase SPECIFICATIONS Camera type: BRESSER / Touptek GPCMOS02000KPA color Sensor: SONY IMX290 CMOS color, backlit Image and video size: Full HD 1936 x 1096 pixels (video 15 FPS) Native sensor size in pixels: 1936 x 1096 Exposure times: 66µs to 16min Binning: YES, 2x2 Megapixel: 2.1 MP Sensor size in mm: 5.6 x 3.1 Pixel size: 2.9 µm x 2.9 µm Bit depth: 8/12 switchable ST-4 Compatible Autoguider: YES CNC milled housing made of aluminum Protective strap on the camera housing Camera tube diameter: 1.25 "(31.7 mm) Camera connection thread: C-mount + 1.25 "filter thread Computer interface: USB 2.0 C-mount extension tube with 1.25 inch filter thread included No IR cut filter installed Operating system: WINDOWS 10 + 11 ASCOM driver included Field of view for different focal lengths in mm (given in arc minutes): 400mm - 48.2 'x 27.3' 500 mm - 38.6 'x 21.8' 600 mm - 32.1 'x 18.2' 700 mm - 27.5 'x 15.6' 800 mm - 24.1 'x 13.6' 900 mm - 21.4 'x 12.1' 1000 mm - 19.3 'x 10.9' 1250 mm - 15.4 'x 8.7' 1500 mm - 12.9 'x 7.3' 1750 mm - 11.0 'x 6.2' 2000 mm - 9.6 'x 5.5' SCOPE OF DELIEVERY Full HD camera C-mount adapter USB 2.0 PC connection cable with a length of 200cm Interface cable for ST-4 autoguider port with 150cm length Dust cap for camera tube Software CD

Finally, a universal tracking kit is available, which is easy to assemble and handle. Consisting of a telescopic sight, a tracking camera and the required prism clamp you can start long-term photography with active tracking control (autoguiding). Simply mount the prism clamp with the mounting screws on the carrying handle of the BRESSER Messier and EXPLORE-SCIENTIFIC telescopes and the AR90 / 500 guide scope with tracking camera can already be fixed stably parallel to the main telescope. The tracking camera is now connected directly to the ST-4 compatible autoguider socket of your telescope mount. Connecting the tracking camera via USB cable to your Windows computer and install the camera drivers and any Autoguider software - you can start with the astrophotography. The prism clamp has 2 x 6mm countersunk holes (35mm hole spacing) and 3 further 1/4 "photo tapped holes to allow for versatile adaptation to a variety of other telescopes and adapter plates. The tracking camera is very useful for tracking Recording of planets and even deep-sky objects. A detailed description of the tracking camera can be found at the BRESSER article number 4959050. NOTE: It is necessary to mount the camera on the telescope using the diagonal mirror so that focusing will work.NOTE: The autoguider software is not included. You can use PHD Guiding, Guidedog, Metaguide, Guidemaster (Freeware) or AstroArt, MaxIm DL (chargeable).DOWNLOAD PHD-Guiding: http://www.stark-labs.com/phdguiding.html DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html FEATURES Universal BRESSER Guiding Kit Guiding-scope, guiding-camera and dovetail clamp included For long exposure Astrophotography with autoguiding Aperture of guiding-scope: 90mm Focal length of guiding-scope: 500mm Screw set for Messier/ES handle included Fits also to many other telescopes SCOPE OF DELIVERY Guiding-scope BRESSER Messier AR90/500 (Art.Nr. 4890500) + Acc. Guiding-camera BRESSER GPCMOS02000KPA color (Art.Nr. 4959050) Dovetail-clamp for Messier/ES/GP/Vixen (Art.Nr. 4910220) Screw-set for Messier/ES handle included USB 2.0 cable (camera to computer) ST-4 cable (camera to teleskope mount) Camera driver software + ASCOM driver Professional ToupSky imaging softwareAperture solar filter for solar observing included

After three years of testing and refining we are extremely proud to present the new Explore Scientific High Resolution (HR) Coma Corrector. This corrector is a class of it´s own - it is fully functional for visual use and expands the focal length by only 6%! The Explore Scientific Coma Correktor is delivered as a complete set together with a rotating helical focuser with laser-etched scale, so you get a full package: corrector, adaptor to T2 (M42x0.75mm), adaptor to M48 (M48x0.75) and the helical focuser for visual fun. This coma corrector really is "high resolution" - it deliveres a visual polystrehl performance of 0,98 at f/4 and 0,96 at f/3! So it can stay in the telescope - and you will not only enjoy a tack-sharp Jupiter, but aslo sharp and defined moons in the future! What this means in terms of performance is shown in the three pictures with the graphs - the sharpness increase in those comparisons with and without corrector are stunning (examples are 400mm f/4, f/3,5 and f/3). Please notice: These graphs are for FLAT FIELD! You will get this performance without refocussing! Diameter of the field is 30mm - it doesn´t make sense to increase this with 2" and fast optical systems. Length of the 2" corrector barrel is approx. 85mm and it can be used with almost all 2" focusers on the market. To use the HR Coma Corrector visually, you need to have at least 32mm spare inward travel at your focuser, while the focus is on the same plane as the focusers end. Photographically there is no problem - the HR Coma Corrector shifts the focus outward by about 35mm, so that you will have no problem in achieving focus, when you are able to focus your camera without the HR Coma Corrector. FEATURESEliminates coma, field-curvature and astigmatism in newtonians Diffraction limited performance on axis and in the field Flattens the field Works for very fast systems down to f/3 Four-lens construction Can be used with almost all 2" focusers on the market SCOPE OF DELIVERY High Resolution (HR) Coma Corrector Adaptor to T2 (M42x0.75mm) Adaptor to M48 (M48x0.75) Helical focuser

The EXPLORE SCIENTIFIC 3" 0.7x Reducer/corrector, reduces a compatible telescope's focal length by a factor of 0.7x (for around f/8) and 0.8x (for around f/10) respectively. The reducer/corrector not only reduces the focal length but also flattens the field. Although originally developed for the Explore Scientific ED-APOs 127mm and 152mm, the reducer can be used with many systems - for example with the Explore Scientific ED-APOs 102mm and 165mm (please note, this will not work on the Explore Scientific 80mm ED Apo refractors though). With certain telescope focal lengths, a slight restriction of the correction at the edge of the image field can be expected when using full-frame sensors. This unit comes with 3" barrel adaptor for direct focuser thread M54x0.75 (the standard focuser thread of the Explore Scientific Essential series of ED Apos) and T2 camera adaptor. This reducer/corrector features a free aperture of 65mm, so that it can be used even with cameras that have a large sensor - if the telescope allows for this. Note: As previously mentioned, this Reducer/corrector comes with a screw on ring, which fits the standard focuser thread of the Explore Scientific Essential series of ED Apos. For telescopes which are equipped with the 2.5" HEX Focuser, the optional screw-on adapter part no: 0510366 is needed. Other telescopes, not in the Explore Scientific range, with standard 2" push-fit focusers will need the Explore Scientific 2" Adaptor for 3" Corrector - part no: 0510364 to get this reducer correctly fitted. SPECIFICATIONS Reduces the focal length by 0.7x at f/8 Flattens the field for astrophotography Developed for ED127 und ED152 APO telescopes Also fits Explore Scientific ED102 and ED165 telescopes - and others Free aperture: 65mm Inner thread for telescope adaption: M76x0.75mm Outer thread for camera adaption: M72x0.75mm 3" focuser barrel adaptor included Adaptor for Explore Scientific focuser M54x0.75mm included T2 camera adaptor M42x0.75mm included Diameter: 78.5mm; length: 100mm Length without adaptors: 52mm Weight without adaptors: 530g What's Included Reducer/Flattener 3" focuser barrel adaptor Adaptor for Focuser M54x0.75mm T2 camera adaptor M42x0.75mm Dust caps

Set of 5 extension tubes with T2 thread on both sides for exact distances and secure hold of cameras for astrophotography. Also comes with SC to T2 thread adapter.In astrophotography, most cameras are connected to a telescope via a T2 thread (M42x0.75), the most popular international standard. However, in many cases, T2 and T2-ring adapters for connecting telescope focusers to a camera are not sufficient, as specific distances must also be observed. This is especially important when using correctors, reducers or flatteners. This extension tube set, which consists of 5 mm, 7.5 mm, 10 mm, 15 mm and 30 mm tubes, will allow you to obtain almost any distance using the corresponding combination. Each tube has a T2 interior thread on one side and a T2 exterior thread on the other side.Most telescopes either include a T2 thread adapter, or the eyepiece can be used with a simple T2 thread adapter with a 2 plug-in diameter (item no. 0510365).However, Maksutov-Cassegrain, Schmidt-Cassegrain, ACF or RitcheyChrétien telescopes may use a so-called SC thread. To allow you to use this extension tube set with these telescopes, the set also includes an SD to T2 thread adapter.FEATURES5 T2 tubes with lengths from 5 mm to 30 mmCombination of tubes allows you to obtain distances of 5 mm to 67.5 mmFor exact camera distances in astrophotographyDELIVERY CONTENT5x T2 extension tubes (5/7.5/10/15/30 mm)1x SC to T2 thread adapter

The BRESSER Telescope Camera Adapter is the connecting piece between your 35 mm DSLR camera and the telescope. The connection to your camera can be achieved with the fitting T2-mount (T2-mount optional). For the focal fotography, you need to unscrew the bottom part of the adapter and attach the camera with the fitting T2-mount directly to the push-on contact. The eyepiece projection is possible when you put an eyepiece into the adapter and tighten the knurled screw. After that, you have to attach the T2-mount and the camera and you are ready to go.FEATURESEyepiece connection diameter: 31.7 mm (1.25")Eyepiece total diameter max. 35mm  SCOPE OF DELIVERYTelescope Camera Adapter 1.25"

The BRESSER camera adapter is the ideal connecting piece between your 35 mm SLR camera or DSLR and your telescope. The adapter is suitable for 1.25" eyepieces with a larger housing diameter of up to 55 mm. Please note, this adapter will be suitable for most Refractors and Cassegrain designs, but may not be suitable for use with all Newtonian designs of telescopes, due to the comparatively short travel of focus in some Newtonians. Please check with us if you'd like further advice regarding your particular telescope.FEATURESvariable camera adapterfor eyepiece projection and prime focusincludes a short prime focus adapter from 1.25" to T2 threadsuitable for 1.25" eyepieces up to 55mm housing diameter barrel diameter: 31.7mm (1.25")WHAT'S INCLUDEDvariable camera adapter

Enables you to connect a camera to telescopes that accept 2" barrel eyepieces. You will need a T2-ring for your special camera type also. The very special feature of this adaptor is the very short mechanical design (2.0mm) which enables the camera use also on telescopes with a short focal range. This adapter is also prepared to use with 2" filters.