EXPLORE SCIENTIFIC ES 8x50 Illuminated Finder Scope

Universal 50mm viewfinder and guide telescope with a focal length of 220mmExcellent 8x50 viewfinder telescope with removable eyepiece unit and crosshairs with adjustable red illumination. The precise helical focuser and the 1.25 inch /31.7mm plug-in connection, as well as the T2 camera connection thread (M42x0.75mm), allow the autoguiding required for long time exposure to obtain a point-shaped star image. It can also be used as a mini travel telescope.High quality 8x50 viewfinder telescope with adjustable crosshair illuminationImage sharpness and viewing characteristics lift this viewfinder well above the level of the usual 8x50 viewfinder scopes. The visible image is bright and crisply sharp. Furthermore, this viewfinder has a very large field of view (FOV) of 6.96 degrees. This makes finding and adjusting objects much easier. The existing scale markings (pitch=1 degree) on the crosshairs are a good reference for estimating distances, and the open centre markings also make it easier to centre objects precisely. All lens surfaces are protected against weathering by multi-coating and guarantee a bright viewfinder image due to the high light transmission values. The adjustable red LED illumination unit is powered by two LR41 coin batteries. The main lens and the crosshairs can be focused independently of each other, giving you perfect focus for your eyes.Compact tracking unit for autoguidingOne of the main applications for this telescope is the so-called autoguiding. Here the usually larger photo-taking optics are actively corrected by a smaller guiding telescope with a second tracking camera. This means that the mechanical fluctuations in the tracking accuracy, which are present in all astronomical telescope mounts, are measured by the tracking camera and compensated accordingly. This is necessary in order to obtain a point-shaped star image on the astrophotos during long time exposures and to avoid unwanted star trails. For this purpose, the guiding telescope is inserted into the existing viewfinder shoe of the photo-taking optics and aligned parallel. If the existing viewfinder shoe is not compatible, a suitable viewfinder shoe is also included. With the 1.25 inch / 31,7mm plug connection at the rear end or via T2 thread connection (M42x0,75mm), a tracking camera can be mounted afterwards. This is held securely by a brass ring clamp and 3 clamping screws. Please note the required back focus for your tracking camera. The focal plane (backfocus) is approx. 22mm behind the T2 thread. The sensitive focusing on the guiding star is done by a large knurled wheel of the mechanically precise manufactured helical focuser. For easy reproduction of the point of focus, this has a white millimetre scale from 0 to 28mm, which is attached by laser engraving. After the tracking camera has been connected directly or via computer to the telescope mount and the necessary basic settings have been made, the first astrophotos with long time exposure can be taken.Use as mini travel telescopeThis viewfinder and guide telescope can also be used quite simply as a mini travel telescope. With the optional eyepieces, a magnification of 8x to 40x can be achieved. Nearly all eyepieces with a focal length of 5 to 26mm and 1.25 inch/31.7mm plug connection are suitable. Especially recommended are the EXPLORE SCIENTIFIC eyepieces of the 52 degree (Art. 02195xx) and 62 degree (02196xx) LER series. Note: Only straight view use is possible.Metal viewfinder holder and viewfinder shoeThe mount of this viewfinder and guide telescope is completely made of aluminium and is a stable base. The viewfinder mount is suitable for many common types of telescopes, such as EXPLORE SCIENTIFIC, BRESSER MESSIER etc. If the existing viewfinder shoe is not compatible, a matching viewfinder shoe is also included. This can be attached to the telescopic tube by means of four M5 screws. The bore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axis. The six large adjustment screws with non-slip knurling make it easy to align the viewfinder, even with clammy fingers. All adjusting and clamping screws have plastic tips that effectively prevent the viewfinder housing and viewfinder mount from being scratched.FEATURESExcellent 8x50 viewfinder and guiding telescopeCan also be used as mini travel telescopePerfect image sharpness and good viewing comfortFMC Multi-coated lens surfacesLens focal length: 220mmMax. possible camera weight: 550gRemovable eyepiece/cross hair unitCamera connection via 1.25 inch / 31.7mm plug connection or T2 threadT2 thread: M42 x 0,75mmPrecise helical focuser for focusing the visible imageFocuser travel range: 28mmClose focus distance: 3 mLaser engraved millimetre scale from 0 to 28mm on the focuserFocal plane (backfocus) is approx. 22mm behind the T2 threadSeparate focusing of the crosshair at the eyepieceVery large field of view FOV of 6.96 degreesWith adjustable red cross-hair iillumination Scale markings crosshair with 1.0 degree graduationPower supply of illumination unit: coin battery type LR41 (2pcs)Brass ring clamp and 3 clamping screws on the 1.25 inch plug connectionWith optional eyepieces magnifications from 8x to 40x can be achievedSuitable are almost all eyepieces with 1.25 inch/31,7mm shaftMounting of the viewfinder telescope is completely made of aluminiumViewfinder mount with 6 large adjustment screws with knurled head for easy gripFinder shoe suitable for EXPLORE SCIENTIFIC, BRESSER MESSIER etc.Additionally a suitable viewfinder shoe is includedBore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axisAdjusting and clamping screws have plastic tipsSCOPE OF DELIVERY8x50 viewfinder/guiding telescopeEyepiece unit with crosshairCrosshair illumination unit incl. batteriesViewfinder holder with viewfinder shoeInstruction manual

BRESSER Messier 8x50 Viewing finder scope with mount and integrated illumination. Finder slot included.FEATUREShigh-quality workmanshipintegrated illuminationeyepiece with reticleSCOPE OF DELIVERYviewfindermountviewfinder shoeprotective caps

Top viewfinder telescope with upright field, illumination, 90° view and pole viewfinder engraving - image sharpness and viewing behavior raise this viewfinder significantly above the level of the usual 8x50 viewfinder telescopes. The upright image field facilitates orientation. Multi-Coating on all surfaces. This polar finder is mainly intended for the observer with a transportable telescope. The 90° view facilitates operation, and with the help of the pole scale and the lighting, a telescope can be quickly and safely aligned to the celestial pole. The upright field of view makes the handling together with the high image sharpness a pleasant experience. The lighting is powered by two LR41 button cells.

Solidly in the mid-magnification range for most amateur telescopes, the 25mm is a true workhorse for visual observers. If you love deep sky observing, eyepieces in this focal length range not only give healthy increases in magnification, but the contrast enhancement of giving a darker background sky can make all the difference of how galaxies and nebulae appear under suburban skies.Comfort, Quality, Value. The Explore Scientific 52° LER Series mid-range focal length eyepieces are excellent flat-field multi-element oculars that can transform your visual astronomy experience. With an apparent field of view of 52 degrees, these eyepieces offer incredible value in a very nice eyepiece. Expect exceptional quality and value versus a comparably priced Plossl.  These eyepieces are the choice for observers wearing glasses - with excellent performance and durability. The rubber inlet and the foldable eyecups make handling and using in the field easy. The patented EMD-coating produces high contrast images and prevents reflexes and ghosting. The argon purging effectively prevents internal fogging, and you don´t have to deal with dirt, fungus or cleansing fluids getting between the lenses. The eyepieces are sealed - this makes sure you will be able to enjoy these eyepieces for many years to come.SPECIFICATIONS:Large eye distance, large field and great image sharpnessExcellent viewing position for people with glassesExcellent field sharpness even with fast optics52° apparent field of viewArgon-purging prevents internal fogging, the sealing facilitates cleaningPatented EMD-coating to maximize contrastBlackened lens edges to avoid reflexesAll eyepieces of this series are parfocalStainless steel barrel with conical security cutoffDust covers and protective bag includedSCOPE OF DELIVERY:52° EyepieceDust coversProtective bag

Optical pole finder scope for fast and precise polar alignment of the BRESSER EXOS-1 EQ mount (part No. 4964200). The BRESSER Polar Viewfinder is used with the BRESSER EXOS-1 EQ mount enabling high precision alignment to the celestial pole by using the illuminated reticle and star constellation markings. Simply adjust the pole height and azimuth until the constellation markings in the polar finder match the constellations in the sky - that's it. Ideal for optimizing tracking accuracy in astrophotography. FEATURES Optical pole finder scope with illumination To optimize the polar alignment Suitable for BRESSER EXOS-1 EQ mountIlluminated crosshairs and constellation markings Quick and easy to use SCOPE OF DELIVERYPolar Viewfinder EXOS-1Mounting material Instruction manual 

The Vixen Viewfinder 7x50, with illuminated reticule is an exceptionally high quality optical finder scope, featuring 50 mm Achromatic objective. The internal crosshairs are accurately inscribed and can be illuminated with a battery-powered LED attachment, which can be varied in brightness to the user's requirements. This finder gives a field of view of 7.2° in the night sky. Please note: this finder does not come with a bracket, but will fit numerous standard finder brackets - the X000288 Vixen S 50 mm finder scope short holder, or the X000073 Vixen XY finder scope long holder are particularly recommended. FEATURES Finder with 50 mm achromatic optics Field of view: 7.2° Battery: CR2032 Dimensions: 218x53 mm Weight: 0.375 kg WHAT'S INCLUDED: Viewfinder 7x50, with illuminated reticule

BRESSER Viewfinder 6x30 Category: Spare Part for Messier Telescope Series Description: The high-quality Viewfinder 6x30 with a crosshair is an indispensable accessory for Messier Telescopes. It facilitates precise alignment to celestial objects, enabled by easy mounting and precise adjustment. Suitable for the BRESSER Messier Telescope series.