EXPLORE SCIENTIFIC EXOS-2 PMC-Eight GOTO Mount

BRESSER EXOS-2 GoTo Equatorial Mount. Mount, tripod and hand box with computer. This German mount has tracking motors in both axes that follow celestial objects very precisely.The handbox with GoTo works reliable and controls the mount in every situation. Precise ball bearings in both axes ensures minimal backlash at all nine possible tracking speeds.The battery pack (12 V) is conveniently fastened to the tripod shelf and takes eight size "D" batteries.The mount rests on a very tough and rigid stainless steel tripod and can take optical tubes of up to 13 kg. GOTO - Stargazing at the push of a button! The Startracker GoTo System enables beginners to start astronomical observations in just a few minutes, and guides you to objects that are hard to localize through a standard finder scope.Just push the button and the GoTo System will find planets, nebulae or galaxies for you and position your telescope automatically and precise.The GoTo System database includes thousands of astronomical objects.The Messier mount with GoTo System allows you to observe without tedious searching, or image faint objects that are hard to find in a standard finder scope.The BRESSER StarTracker GoTo systems uses servo motors for both axes and features an ST-4 compatible autoguiding input. Guiding aggressivity can be set on the mount itself. The menu navigation of the Startracker Handbox is also multilingual and offers the settings of German, English, French, Spanish and Italian.CHARACTERISTICS MOUNT Stable parallactic mount with fine drive in both axes Ball bearings in both axes for more precise movements Stable height adjustable stainless steel tripod ( Min. 69cm / Max. 109,5cm ) Load capacity up to 13 kg payload Circular bubble for easy horizontal alignment GoTo Mount with motors and hand box controller, for easy finding and guiding moon, planets, stars and much more ST-4 compatible autoguider interface Pole height scale for setting the latitude Scaled graduated circular rings to facilitate finding objects using a star atlas or planetarium software Pole finder scope with optional illumination ( item no. 4964212 ) Tripod weight: 4.7 kg Mount weight: 6.7 kg (without counterweight) Total weight incl. counterweight: 15.9 kg Batteries: not included SCOPE OF DELIVERY Equatorial EXOS 2 GOTO mount with stainless steel tripod and Startracker handcontroller Adjustable polar finder scope with optional illumination Stainless steel tube field tripod with accessory tray 1 x 4.5 kg counterweight

The iEXOS-100 is a complete astronomical computerized Wifi or Wired GOTO Equatorial Tracker with integrated PMC-Eight electronics suitable for attaching Small Telescopes or DSLR Cameras attached to a standard Vixen Style Dovetail Plate. Also a ST-4 compatible autoguider port for active tracking control is included. Use with the free ExploreStars App for Tablets (Windows, Android, iOS), or with the free ASCOM Standards Compliant POTH Client from Explore Scientific (either wired or wireless) to work with virtually any sky software that supports ASCOM. The iEXOS-100 utilizes a proven German equatorial mount design and Explore Scientific’s revolutionary PMC-Eight™ motion control system to flawlessly navigate the night sky and track objects as they journey across it. This combination provides superior observing and imaging performance without a prohibitive price tag. GOTO systems play an important role in the world of amateur astronomy because they ensure users spend less time searching for particular objects and more time observing and imaging. The PMC-Eight with its versatile connections supported with free to download apps for Window, Android, and iOS, or through the free to download ASCOM POTH Client to connect to your favorite ASCOM Compliant Astronomical Software, can allow you to control the telescope from a few feet away or by communicating computer-to-computer with an Internet connection from virtually anywhere in the world. One of the standout features of the iEXOS-100 system is its German equatorial design. When it comes to tracking the stars with a telescope, there is nothing that compares to a German equatorial mount because it will follow objects as they rise in the east and set in the west. For observers, a German equatorial mount makes it easy to keep your celestial target in your eyepiece. For imagers, it helps you avoid common astrophotography pitfalls like field rotation. Before you can track an object, you need to find it, and that objective can be daunting when you’re faced with a vast expanse of inky black sky. The iEXOS-100 puts a powerful GOTO system in your arsenal of astronomical tools that takes the frustration out of navigating the night sky. This integrated version of Explore Scientific’s PMC-Eight™ system transcends the industry standard single processor by utilizing eight CPUs that operate independently of one another to focus on defined functions. This delegation of tasks among the processors results in a system that offers superior responsiveness, efficiency, reliability and astoundingly fast timing intervals for seamless images and accurate tracking. Although it is internally complex, the GOTO system can be easily operated from your own Apple, Android or Windows tablet using the ExploreStars app, which has an intuitive nature that makes it simple and quick to align your telescope, navigate the stars and learn specifics about tens of thousands of celestial objects. This dynamic app is fueled by a database that is routinely updated to ensure it remains a relevant resource. Our commitment to creating a streamlined GOTO mount is obvious in other design choices. The iEXOS-100 has locking clutches that will let you quickly reposition your telescope from one side to the other and an altitude knob for smooth height adjustments. The mount base includes a small polar alignment tunnel that allows users to roughly align their observing setup with Polaris. It also has a simple bubble level that comes in handy when stabilizing your tripod. Other features include a bracket for holding the battery pack, which powers the PMC-Eight system™ through 8 C batteries (not included); two 1 kg counterweights for balancing; and glow-in-the-dark markers on certain points of the mount and tripod so you can stay oriented with your setup at night. The mount is designed to hold up to 5 kg of astronomical equipment.IMPORTANT NOTETo start using ExploreStars app, download the free app and download the celestial data set that contains the astronomical catalogs, reference images, and reference text. Simply by unzipping the ExploreStars folder containing the expanded celestial data set into your Pictures directory, you will expand the native database from a thousand objects to over seventy thousand objects.  SOFTWARE DOWNLOADhttps://explorescientificusa.com/pages/software-and-downloads-for-pmc-eight-systemFEATURESIntegrated Explore Scientific PMC-Eight™ Wifi GOTO systemBeautiful full graphical user interface using our very own ExploreStars OpenGotoWifi controlled by Tablet, Notebook or Desktop PC with 7'' or larger display, and Wifi function (computer device not included)Needed system software of optional computer or tablet: WIN8.1, WIN10+11, iOS, Android 4.4 or higherClassic four-button pattern and virtual joystick for guiding, centering, moving and slewing on the touch screenIntuitive 2 star and 3 star alignment procedure Includes a small polar alignment tunnelStandard Vixen Style Dovetail AdapterMount load capacity up to 5 kgMultiprocessor Micro Controller with 8 CPU´sMicro-Stepper Motors and worm gearsSilent Belt-Drive System Mini-USB port for INDI/ASCOM wired computer connectionST-4 compatible autoguider portINDI and ASCOM Driver available: YES, supports also Pulse-GuidingYOU can write your own code and import it into this softwareGPS-compatible and auto time / date settings are dependent on optional receiver on computer, tablet or phoneGlow-in-the-dark markings on mount and tripodWeight mount-head: 4,0 kg ; weight tripod: 2,5 kgSCOPE OF DELIVERYExplore Scientific iEXOS-100 PMC-8 Wifi Goto MountStainless steel tripod with bubble levelCounter weight 2 x 1,0 kg Battery compartment 12 volts with bracket / (8 x C-Cells not included) Coil-cord for DEC motorGlow-in-the-dark markings on mount and tripodExploreStars Software via download for freeInstruction manualIMPORTANT NOTE: This package doesn´t include any WINDOWS/iOS/Android Computer or Tablet.FAQ / KNOWLEDGE-BASE:  https://explorescientificusa.com/pages/explore-scientific-knowledge-base-and-faqsPMC-Eight GROUPS:  https://espmc-eight.groups.io/g/MAIN

Mount and Tripod. The BRESSER EXOS 2 is a rugged mount with high rigidity and precision tracking for visual observation and astrophotography. The tripod is extremely rigid to suppress vibrations really well. This model is very well machined and has an illuminated polar finder scope and precise graduated circles. A powered twoaxis control (BRESSER Exos Duo) or a GoTo-Kit is available as an optional extra. The BRESSER EXOS 2 can take the weight - depending on length and use of up to 13 kg. This allows you to use refractors of up to 152 mm aperture and mirror telescopes of up to 203 mm aperture.CHARACTERISTICS Stable parallactic mount with fine drive in both axes Ball bearings in both axes for more precise movements Stable height adjustable stainless steel tripod (min. 69 cm / max. 109,5 cm ) Load capacity up to 13 kg payload Retrofittable with the BRESSER Star Tracker Goto Kit ( item no. 4951750 ) Circular bubble for easy horizontal alignment Pole height scale for setting the latitude Scaled graduated circular rings to facilitate finding objects using a star atlas or planetarium software Pole finder scope with optional illumination ( item no. 4964212 ) Tripod weight: 4.7 kg Mount weight: 5.6 kg (without counterweight) Total weight incl. counterweight: 14.8 kg Batteries: not included SCOPE OF DELIVERY BRESSER EXOS-2 mount Adjustable polar finder scope with optional illumination Stainless steel tube field tripod with accessory tray 1x 4.5 kg counterweight

Discover the possibilities and forge new paths with the Nebula EXOS-2 Goto Mount!Mount and TripodThe BRESSER EXOS-2 is a stable mount with a high load capacity and precise tracking for visual observations and astrophotography. Double radial groove ball bearings in both axes ensure precise, smooth motion, and the RA axis bearing has been optimized to reduce backlash. Additionally, the tripod is reinforced to further suppress vibrations. The BRESSER EXOS-2 can be loaded with up to 13 kg of optics for purely visual use depending on the length and purpose!Nebula: the powerful and flexible Goto systemWith the new Nebula Goto system, set off for new astronomical shores. This system offers several control options. You can operate the mount directly via its own Nebula control interface using your smartphone or tablet (iOS and Android supported). Alternatively, you can also use a planetarium software such as SkySafari. Manual control remains an option as well. For this, a hand box for minor corrections or simple control commands is included.Furthermore, with the BRESSER Nebula Goto Kit, you can connect your laptop or PC directly via WIFI or LAN cable (recommended for faster data transfer) to the Nebula control unit. This not only gives you full control over the mount but also allows you to connect various devices such as cameras, motor focus, filter wheels, etc. directly to the control unit via various USB ports. This eliminates the need to connect each device to your computer via cables. The pre-installed program KStars / EKOS lets you comfortably control all devices from your PC or laptop. Electronic polar alignment or guiding can also be easily achieved with the Goto Kit, provided you have a camera connected. You are also not limited to the software of the Nebula control unit. Thanks to the installed ASCOM Alpaca driver, you can use your own programs on your computer to control the mount - whether it's Stellarium or N.I.N.A. The two stepper motors with a belt drive ensure a smooth, direct drive of the two axes. It's only important to have a good balance. FEATURES EXOS-2 MOUNT Stable parallactic mount with fine drive in both axes Ball bearings in both axes for more precise movements Sturdy height-adjustable stainless steel tripod (Min. 69 cm / Max. 109.5 cm) Load capacity of up to 13 kg Spirit level for easy horizontal alignment Polar height scale for setting the latitude Polar scope with optional lighting (item no. 4964212) Tripod weight: 4.7 kg Mount weight: 5.6 kg (without counterweight) Total weight including counterweight: 14.8 kg Batteries: not included FEATURES GOTO SYSTEM Belt drive for a more precise, quieter tracking Stepper motors with high resolution (0.36´/microstep) Hand control box for direct control of the mount Virtual hand control box for smartphones and tablets PC control – ASCOM compatible USB ports for cameras, motors, filter wheels etc. SCOPE OF DELIVERY BRESSER EXOS-2 Mount Polar finder scope with optional illumination Stainless steel field tripod with accessory tray 1x 4.5-kg counterweight 2 stepper motors for the axes (RA and DEC) Raspberry Pi control unitBasic handbox 230V / 12V / 3 A power adapterConnection cableManual for download

With the set of the BRESSER Messier NT-203/1000 Telescope and the EXOS-2 PMC-Eight GoTo mount, you are perfectly equipped for impressive planetary and deep-sky observations or photography. The optics, with a parabolic primary mirror, large aperture, and long 1,000-mm focal length, reveal fine details on planets and fascinating structures in distant galaxies. Additionally, you can admire the surface of our own star during the day with the secure solar filter. The powerful GoTo mount and app ensure precise tracking during your observations and astrophotography sessions, as well as easy orientation and navigation in the sky. The Telescope The BRESSER Messier NT-203 Telescope is equipped with a parabolic primary mirror, allowing observations that were unattainable in this price range just a few years ago. Modern manufacturing technology enables you to track the shadow of Jupiter's moons on the planet itself; the range of structures and details on Jupiter's surface is breathtaking. The BRESSER Messier NT-203 not only excels at planetary observation: Discover structures in distant galaxies and be fascinated by the filaments of emission nebulae in the vastness of the Milky Way. With the BRESSER Messier NT-203 Telescope, you can observe the remnants of exploded giant stars and the birthplaces of new stars. During the day, you can safely observe sunspots, eclipses, and planetary transits with the secure solar filter. (Warning: Never point the telescope at the sun without a solar filter!) Let yourself be surprised by the wonders of the universe with this exceptionally large device! The Mount The EXPLORE SCIENTIFIC EXOS-2 PMC-Eight GoTo Mount is equipped with a modern and highly precise GoTo control system. It consists of a robust Wi-Fi controller unit that provides all necessary interfaces. The NEMA-11 stepper motors are directly connected to this unit via cable, and an ST-4 compatible autoguider port is also included. The control system supports micro-stepping for precise tracking. Intuitive operation via app and graphical star map The ExploreStars app, developed specifically for the PMC-Eight system, impresses with a very well-designed, intuitive graphical interface. The current alignment stars for initializing the control and all sky objects in the database are displayed as a star map with additional text information. All of these objects can be conveniently viewed and selected. Powerful controller unit with Open GoTo for customization The heart of the controller unit is a completely autonomous 2-channel multi-processor with 8 CPUs and a Wi-Fi Ethernet 10/100 adapter with IP functionality. This allows remote control via browser, ASCOM, app, or serial connection. The Open GoTo system also enables custom firmware to be written and uploaded to the controller unit, allowing individual customization of the device's functions and the creation of your own object lists, etc. Polar scope included The pre-assembled polar finder scope included in the set enables a quick and precise polar alignment, allowing long exposure times without unwanted star trails. The integrated LED illumination unit further enhances the comfort of using the polar finder. FEATURES TELESCOPE Type: Reflector telescope Mirror diameter: 203 mm / Focal length: 1,000 mm / F/5 Maximum useful magnification: 406x Telescope for night and solar observation High-quality Hexafoc focuser with 2.5" free inner diameter Diffraction-limited optics with parabolic primary mirror 8x50 finder with crosshair eyepiece Optimized finder bracket for comfortable viewing Handle for easy transport with integrated camera holder (tripod thread screw) Smartphone adapter for sky navigation included Prism rail with stainless steel clamp surface (44-mm universal dovetail for GP/EQ5/LXD75) T2 adapter for SLR cameras (optional T2 ring required) 50.8 to 31.7 mm adapter with integrated T2 adapter (optional T2 ring required); with brass compression ring FEATURES MOUNT Powerful PMC-8 Open GoTo system User-friendly and visually appealing ExploreStars OpenGoto app Wi-Fi control via tablet, notebook, or desktop PC with at least a 7" display and Wi-Fi functionality (not included) Compatible operating systems: WIN8.1, WIN10/11, iOS, or Android 4.4 and higher Classic control via direction keys or joystick for guiding, centering, correcting, and moving via touchscreen Intuitive 2-star and 3-star alignment for initializing GoTo control Multi-processor microcontroller with 8 CPUs (processor cores) Micro-stepper motors NEMA-11 Highly precise and quiet belt drive ST-4 compatible autoguider port ASCOM drivers available, also supports pulse guiding Possibility to create your own firmware and object lists and load them into the PMC-8 GPS compatible / settings depend on the computer or tablet used Powered by 12-volt DC, with a maximum current draw of 1.6 amps under full load SCOPE OF DELIVERY Optical tube with Hexafoc focuser Solar filter 26 mm Super Plössl eyepiece (31.7 mm / 1.25") Integrated 31.7 mm and T2 adapter Prism rail with stainless steel clamp surface Adapter for 50.8 mm (2") eyepieces Rotating star map Solar filter Tube rings with carrying handle and camera holder 8x50 finderscope Smartphone adapter for navigation Astronomy PC software Stellarium (via download) EXOS2-GT mount with Open GoTo PMC-8 Stainless steel tripod with built-in bubble level Counterweight 2 x 4.5 kg Polar finder with illumination unit Power supply 12 volts / 2 amps ExploreStars app via software download Instruction manual

​The BRESSER EQ-3 is a German equatorial telescope mount that can be used universally for light to medium-weight telescope tubes with a net weight of up to 5 kg.The only requirement for telescope tube mounting is a universal Vixen profile GP dovetail mounting bar - found on many commercially available telescope. This high-quality equatorial mount allows easy alignment to the celestial pole in no time and then allows tracking of all celestial objects manually with its single RA axis. Both RA and DEC axes come with manual slow motion control cables, for easy adjustment of your telescope's pointing.  Also included is a sturdy, yet lightweight, aluminium field tripod, which can be individually adjusted in leg height to give you perfect stability, even on rough ground. The included 1.5 kg counterweight is used to adjust the balance between the telescope tube and the mount.  Further counterweights can be supplied if needed. NOTE: If you want automatic Right Ascension tracking of celestial targets, this telescope mount can be equipped with the optional motor set Art. 4951400.FEATURESGerman equatorial telescope mountFor light to medium-weight telescope tubes of up to 5 kg net weightUniversal Vixen GP-style dovetail holderEasy polar alignment with adjustable altitude and azimuth axesAllows convenient tracking by slow motion right ascension axisWhat's IncludedBRESSER EQ-3 mountField tripodCounterweight