EXPLORE SCIENTIFIC Flight-Case ED127 ALU Tube

Your telescope is much more than an observation aid. It is your personal pathway to the stars, and protecting it while it is in storage or transit should be a priority. Designed specifically for the ED127, ED127CF, AR127s and AR152s, this soft-sided carrying case offers that ideal combination of protection and portability. Inside, the light gray colored nylon features multiple adjustable velcro compartments designed to carefully cradle and easily organize your scope, eyepieces and accessories. The padded polyester outer shell has reinforced back and sides, a shoulder strap with Explore Scientific embroidered logo pad and hand straps for grab-and-go convenience. The case's interior measurements are 110 x 29 x 20 cm. Weight is 1,8 kg.FEATURESSoft-sided carrying caseProtection and organization of your scope and accessoriesIdeal combination of protection and portabilityMultiple adjustable velcro compartmentsShoulder strap with Explore Scientific embroidered logo padNo shifting between compartmentsReinforced back and sidesKeeps the contents safe Interior measurements are 110 x 29 x 20 cm, Weight is 1,8 kgExterior measurements are 115 x 34 x 24 cm SCOPE OF DELIVERYaccessory soft case with protective dividers

Super robust flight-case suitable for all Explore Scientific ED102 APO telescopes with white aluminum tube.

Universal 60mm viewfinder and guide telescope with a focal length of 250mmExcellent 10x60 viewfinder telescope with removable eyepiece unit and crosshairs with adjustable red illumination. The larger aperture and focal length, provide an even brighter field of view and more accurate tracking due to the higher resolution. The precise helical focuser and the 1.25 inch /31.7mm plug-in connection, as well as the T2 camera connection thread (M42x0.75mm), allow the autoguiding required for long time exposure to obtain a point-shaped star image. It can also be used as a mini travel telescope.High quality 10x60 viewfinder telescope with adjustable crosshair illuminationImage sharpness and viewing characteristics lift this viewfinder well above the level of the usual 10x60 viewfinder scopes. The visible image is bright and crisply sharp. Furthermore, this viewfinder has a very large field of view (FOV) of 6.0 degrees. This makes finding and adjusting objects much easier. The existing scale markings (pitch=0.85 degree) on the crosshair are a good reference for estimating distances, and the open centre markings also make it easier to centre objects precisely. All lens surfaces are protected against weathering by multi-coating and guarantee a bright viewfinder image due to the high light transmission values. The adjustable red LED illumination unit is powered by two LR41 coin batteries. The main lens and the crosshairs can be focused independently of each other, giving you perfect focus for your eyes.Compact tracking unit for autoguidingOne of the main applications for this telescope is the so-called autoguiding. Here the usually larger photo-taking optics are actively corrected by a smaller guiding telescope with a second tracking camera. This means that the mechanical fluctuations in the tracking accuracy, which are present in all astronomical telescope mounts, are measured by the tracking camera and compensated accordingly. This is necessary in order to obtain a point-shaped star image on the astrophotos during long time exposures and to avoid unwanted star trails. For this purpose, the guiding telescope is inserted into the existing viewfinder shoe of the photo-taking optics and aligned parallel. If the existing viewfinder shoe is not compatible, a suitable viewfinder shoe is also included. With the 1.25 inch / 31,7mm plug connection at the rear end or via T2 thread connection (M42x0,75mm), a tracking camera can be mounted afterwards. This is held securely by a brass ring clamp and 3 clamping screws. Please note the required back focus for your tracking camera. The focal plane (backfocus) is approx. 22mm behind the T2 thread. The sensitive focusing on the guiding star is done by a large knurled wheel of the mechanically precise manufactured helical focuser. For easy reproduction of the point of focus, this has a white millimetre scale from 0 to 28mm, which is attached by laser engraving. After the tracking camera has been connected directly or via computer to the telescope mount and the necessary basic settings have been made, the first astrophotos with long time exposure can be taken.Use as mini travel telescopeThis viewfinder and guide telescope can also be used quite simply as a mini travel telescope. With the optional eyepieces, a magnification of 9x to 50x can be achieved. Nearly all eyepieces with a focal length of 5 to 26mm and 1.25 inch/31.7mm plug connection are suitable. Especially recommended are the EXPLORE SCIENTIFIC eyepieces of the 52 degree (Art. 02195xx) and 62 degree (02196xx) LER series. Note: Only straight view use is possible.Metal viewfinder holder and viewfinder shoeThe mount of this viewfinder and guide telescope is completely made of aluminium and is a stable base. The viewfinder mount is suitable for many common types of telescopes, such as EXPLORE SCIENTIFIC, BRESSER MESSIER etc. If the existing viewfinder shoe is not compatible, a matching viewfinder shoe is also included. This can be attached to the telescopic tube by means of four M5 screws. The bore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axis. The six large adjustment screws with non-slip knurling make it easy to align the viewfinder, even with clammy fingers. All adjusting and clamping screws have plastic tips that effectively prevent the viewfinder housing and viewfinder mount from being scratched.FEATURESExcellent 10x60 viewfinder and guiding telescopeCan also be used as mini travel telescopePerfect image sharpness and good viewing comfortFMC Multi-coated lens surfacesLens focal length: 250mmMax. possible camera weight: 550gRemovable eyepiece/cross hair unitCamera connection via 1.25 inch / 31.7mm plug connection or T2 threadT2 thread: M42 x 0,75mmPrecise helical focuser for focusing the visible imageFocuser travel range: 28mmClose focus distance: 3 mLaser engraved millimetre scale from 0 to 28mm on the focuserFocal plane (backfocus) is approx. 22mm behind the T2 threadSeparate focusing of the crosshair at the eyepieceVery large field of view FOV of 6.0 degreesWith adjustable red cross-hair iillumination Scale markings crosshair with 0,85 degree graduationPower supply of illumination unit: coin battery type LR41 (2pcs)Brass ring clamp and 3 clamping screws on the 1.25 inch plug connectionWith optional eyepieces magnifications from 9x to 50x can be achievedSuitable are almost all eyepieces with 1.25 inch/31,7mm shaftMounting of the viewfinder telescope is completely made of aluminiumViewfinder mount with 6 large adjustment screws with knurled head for easy gripFinder shoe suitable for EXPLORE SCIENTIFIC, BRESSER MESSIER etc.Additionally a suitable viewfinder shoe is includedBore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axisAdjusting and clamping screws have plastic tipsWHAT'S INCLUDED10x60 viewfinder/guiding telescopeEyepiece unit with crosshairCrosshair illumination unit incl. batteriesViewfinder holder with viewfinder shoeInstruction manual

Field flattener without reduction factor for Explore Scientific ED80 , ED102 and ED127 APO Refractors The imaging plane of many telescopes is not flat but curved. This means that only the area in the centre is perfectly focused - the edge becomes blurred. The human eye can usually compensate for this image property, but a camera shows increasing blurriness towards the edge of the image field. The Explore Scientific Zero X field flattener eliminates the field curvature in many telescopes with a focal length of approx. 480 to 952 mm. The Zero X field flattener was calculated and developed for Explore Scientific ED80, ED102 and ED127 apochromats with focal ratios of F=6.0 and F=7.5. The image sharpness at the edge is dramatically increased. The stars appear round and no longer distorted - a clear benefit for the whole image aesthetics. The Zero X image flattener can be used not only with Explore Scientific Apos, but also with many other Apos. This flattener does not change the focal length of the telescope. Correction for up to full-frame camera sensors (24x36mm) The Explore Scientific Zero X image flattener has been developed due to the rapid development of ever larger camera sensors. With it, there is finally a field flattener available that illuminates and corrects the field of view for full-frame camera sensors up to 24x36 mm. How to use the Zero X field flattener with M48 thread connection This field flattener has a 2 inch (50.8 mm) plug-in connection on the telescope side, with which it is inserted into the telescope instead of an eyepiece or star diagonal mirror. On the camera side, there is a standardised M48 x 0.75 mm connection thread. This M48 connection thread offers a larger free inner diameter than the usual T2 (M42) thread and prevents vignetting when using large camera sensors. With an optionally available and camera-specific adapter ring, a DSLR camera can be connected to it. The working distance is already set at 55 mm. Of course, mirrorless cameras or special astro cameras can also be used with the M48 thread connection. For this, the appropriate M48 spacer sleeves or adapters are additionally required to set the right working distance of 55 mm. This must always be done with every corrector or field flattener so that the best possible field flattening is achieved.Filter thread on telescope side availableThe telescope-side 2.0 inch plug-in sleeve has an M48x0.75 filter thread (internal thread). Individual 2.0 inch colour or nebula filters can be inserted here to increase the contrast of the images.FEATURESField flattener for Explore Scientific ED80, ED102 and ED127 APO telescopesRemoves field curvature from telescopesProduces round stars even at the edge of the image fieldImage sharpness at the edge is drastically increasedA clear benefit for the whole image aestheticsCorrection of field curvature for up to full-frame camera sensors (24x36 mm)Image field flattener without reduction factorOn the telescope side with 2 inch (50.8 mm) plug-in connection and M48x0.75mm filter threadCamera side with large M48 threaded connectorWorking distance of 55 mm between field flattener and camera sensorFor telescopes with a focal length of approx. 480 to 952 mmOptimised for telescopes with focal ratios from F=6.0 to F=7.5Can also be used for various other APOsFully multi-coating on all lens surfacesHousing made of lightweight aluminium, black anodisedAluminium dust cap for M48 threadSCOPE OF DELIVERYZero X field flattener (1 piece)Dust caps

The Vixen carry case is specially designed for secure storage and transport of the SPX2 mount. It also has space for the StarBook TEN controller, the StarBook cable and the AC adapter. The housing is new from a newly developed material called Plapearl, which is highly weather-resistant and lightweight. The special design featuring two plastic plates with vacuum-moulded cylinders reduces the weight by 36% compared with conventional aluminium materials. FEATURES Stable case for the SXP2 mount Material: Special polypropylene and aluminium alloy Colour: White Dimensions: 47.5cm x 49cm x 22.5cm Weight: 4.1 kgDELIVERY CONTENTCarry case for SXP2 mountKey for locking the case

With the practical BRESSER Lens Cleaning Kit you can clean lens parts of a camera, binoculars or spotting scopes. The versatile cleaning kit has been specially put together for wet and dry cleaning and is the perfect travel companion in a practical case with carabiner.The universal set contains the necessary accessories for the care and cleaning of cameras and binoculars, but can also be used for other optical devices. The 2-in-1 lens pen included in the set, with a nylon brush at one end and a carbon coated rotating disc at the other, gently removes sensitive components on cameras and optics. With the mini air bellows, the fine nozzle tip reliably removes the finest dust, sand or fluff even in hard-to-reach areas. The cleaning fluid is also suitable for the care of all optical surfaces, camera housings, monitors, lenses and filters. The five high-quality microfibre cloths included in the scope of delivery reliably pick up dust and dirt, lint-free. Ten wet stripes for quick cleaning on the go complete the setPROPERTIESIdeal for cleaning lenses, binoculars, spotting scopes, cameras and filtersPractical for on the go and travellingEffectively removes fingerprints, grease stains, dust and dirtSuitable for wet and dry cleaningSCOPE OF DELIVERY1x Cleaning pen1x mini bellows1x Microfibre cloth1x Velvet cloth1x Cleaning fluid1x 10x cleaning cloths1x Carabiner bag

Sturdy and padded transport bag made of nylon for the field tripod plus accessories tray of the BRESSER MESSIER MCX-102/MCX-127 GoTo telescopes. FEATURESsturdy and padded nylon tripod transport bagprotects the tripod plus accessory tray during transportfor BRESSER MESSIER MCX102/127 telescope tripodswide shoulder strap with quick-release fasteners includeddimensions: 700 x 300 x 300 mmweight: 0,5 kg ; colour: light-green SCOPE OF DELIEVERYtransport bag (1 piece)