EXPLORE SCIENTIFIC Radio-controlled Projection Alarm Clock with two Alarms and Temperature Display
- Alarm clock with thermometer, dual alarm and snooze function
- Projects time or temperature, can be rotated 180°
- Continuous projection with power adapter, 5 minutes with batteries
- Dimensions: 98 x 43 x 97 mm / weight: 189 g
- Included: alarm clock, 2x AAA batteries, 3.6 V power adapter, instruction manual
- White LCD backlight
Currently not available
Product number:
RDP3007CM3LC1
EAN:
4007922065380
WEEE-Reg.-Nr.:
DE 34323861
Product information "EXPLORE SCIENTIFIC Radio-controlled Projection Alarm Clock with two Alarms and Temperature Display"
This EXPLORE SCIENTIFIC radio-controlled projection alarm clock with two alarms can project the time or indoor temperature onto the ceiling. The projected time/temperature can be rotated by 180°.
You can also set two alarm times and delay each alarm for 8 minutes using the Snooze button.
The projection can be activated for 5 minutes in battery-powered mode, or continuously when the alarm clock is connected to the mains.
FEATURES
WHAT’S INCLUDED
You can also set two alarm times and delay each alarm for 8 minutes using the Snooze button.
The projection can be activated for 5 minutes in battery-powered mode, or continuously when the alarm clock is connected to the mains.
FEATURES
- Table alarm clock
- Automatically sets the time via DCF radio signal
- Preset to Central European Time, can be set to other time zones
- Time can also be set manually
- 12/24-hour time display
- Date display (day-month/month-day)
- Day of the week display (available languages: English, German, French, Italian, Spanish)
- Integrated sensor for measuring the room temperature
- Temperature can be displayed in °C or °F
- 2 programmable alarm times
- Daily repeat
- Snooze function for 8 minutes
- Projects time or temperature
- Projection can be rotated by 180°
- Focus wheel for focusing the projection
- Optimal distance to projection surface: 1.5 m – 2 m
- 5-minute projection time in battery-powered mode
- Continuous projection when connected to the mains
- Powered by 2x AAA batteries or power adapter
- White LCD backlight
WHAT’S INCLUDED
- Alarm clock
- 2x AAA batteries
- 3.6 V Power adapter
- Instruction manual
| Backlighting: | 1 |
|---|---|
| Batteries included: | 1 |
| Batteries needed 2): | 2x AAA (Micro), 1.5V |
| Batteries required: | 1 |
| Colour of backlighting: | white |
| Field of application [Electronics]: | Alarm, Temperature measurement, Time display |
| Inside temperature (°C) from: | -5 |
| Inside temperature (°C) up to: | 50 |
| Measurement function: | Inside temperature |
| Net weight (without access.) (g): | 189 |
| Sleeptimer: | 0 |
| Total height (mm): | 97 |
| Total length (mm): | 98 |
| Total width (mm): | 43 |
| Water-repellent: | 0 |
| Waterproof 8): | 0 |
Produkt- und Sicherheitshinweise
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Customers also viewed
BRESSER MyTime Jumbo LCD Weather Wall Clock
From
€129.00*
The BRESSER MyTime Jumbo LCD weather wall clock is the ideal weather wall clock for the office or other large rooms. With its 9 cm high numbers the time can easily be read even from a greater distance and from almost any position in the room. The setting of the time as well as the change to daylight saving time is done automatically via the DCF time signal (CET). Apart from that with the weather wall clock you can also always keep an eye on the temperature and humidity and you even get a weather forecast for the following 12 to 24 hours.
PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, it also offers manual time setting in case it is used in a different time zone.FEATURESJumbo display 330 x 185mmRadio controlled clock (automatic setting of time and clock change) AlarmIndoor and outdoor temperature Indoor and outdoor humidity12-24 hours weather forecast Includes wall mounting and fold-out standSCOPE OF DELIVERY1x weather wall clock1x outdoor sensor1x manualREQUIRED BATTERIESStation: 4x AASensor: 2x AAA
