Skip to main content Skip to search Skip to main navigation
  • International shipping deadline: 17 Dec
  • Germany shipping deadline: 18 Dec
  • DHL Express shipping deadline: 19 Dec

EXPLORE SCIENTIFIC Sun Catcher Solar Filter for 9"- 10" SC Telescopes (Refurbished)

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • Check the solar filter before every solar observation and ensure that it is not damaged. Hold it against a strong light source to detect any possible cracks and/or holes. Do not use the telescope for solar observation, even if the solar filter is only slightly damaged. In this case, contact the manufacturer for the appropriate replacement parts.
  • Always use the included solar filter when observing the sun. Make sure it is correctly attached to the telescope according to the instructions. The use of the solar filter is only intended in connection with this telescope.
  • Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
  • Check the secure fit of the solar filter before each solar observation. An accidental detachment from the objective opening can lead to immediate and permanent eye damage and blindness.
  • If the solar filter cannot be securely attached to the tube, improve the fit by placing several self-adhesive felt strips or similar between the solar filter and the objective opening. Never use the solar filter if it cannot be properly mounted on the telescope. In such a case, always contact our customer service first.
  • Be extremely cautious when observing the sun. A brief look through the unprotected optics will immediately cause severe eye damage, potentially leading to complete blindness.
  • Children should not look at the sun through the telescope, even with the filter properly installed. Never leave children unsupervised.
  • Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
  • Do not observe the sun after eye surgeries or other eye conditions without prior medical consultation.
  • Wrinkles/creases in the film are normal and do not indicate a product defect.
  • Do not expose the device to high temperatures.
Skip product gallery

Customers also viewed

EXPLORE SCIENTIFIC Sun Catcher Solar Filter for 9"- 10" SC Telescopes
Explore Scientific's Sun Catcher Variable Large Aperture Solar Filters are available in many sizes to work on most telescopes from 60mm up to 10-inch Schmidt-Cassegrain and of course all Bresser and Explore Scientific Telescopes. The Solar Filter material being used is the new advanced 'Solarlite' Film manufactured by world famous Thousand Oaks Optical through years of research and development. 'Solarlite' a new solar film that has the optical quality of glass with the advantages of impregnated polymer. Perfect also for the solar astrophotographer.NOTE: All Explore Scientific Solar Equipment is rated ISO12312-2 supplied by Thousand Oaks Optical and approved for direct observation of the Sun. These solar filters are available in different sizes, the picture above shows three different sizes as an example. This is the solar filter with 203mm filter diameter.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 203mmFits to outer telescope tube diameter from 200 to 280mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter

Available

€59.90*
BRESSER PM2.5/10 Air Quality Meter
A useful extension to your BRESSER weather station, or also ideal as a practical standalone solution: This PM2.5/PM10 particulate meter will help you to keep track of the air that you breathe. The high-precision meter reliably detects two types of health-relevant particulate matter that causes air pollution: particles with a diameter of less than 10 μm (PM10) and less than 2.5 μm (PM2.5). Measurements – the current reading and the average particulate concentration from the past 24 hours – are displayed on the built-in display and on your weather centre. The base station can be placed at a distance of up to 150 metres from the meter. Compatible with the following BRESSER weather stations: 7003210, 7003220, 7003230, 7110300 FEATURES High-precision PM2.5/PM10 meter Can be used alone or with select BRESSER weather stations LCD screen for displaying the current reading and the PM2.5/PM10 concentration from the past 24 hours Battery level indicator 4 available channels Transmission frequency: 868 MHz Range of up to 150 m Power supply: 3 rechargeable AA batteries (included) or USB port (cable included) DELIVERY CONTENT PM2.5/PM10 air quality meter 3 rechargeable AA batteries USB cable Instruction manual

Incoming

€109.00*