Skip to main content Skip to search Skip to main navigation

EXPLORE SCIENTIFIC T2 Reduction Adapter M48x0.75 to M42x0.75

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and the direct path to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the item number or EAN and open the appropriate help page directly.

Service Portal

Guides & Tips

FAQ - Frequently Asked Questions

That is normal. Finder scopes are only used to make objects easy to locate. The image orientation does not matter for observation.

  • Alt-azimuth: easy to use, moves horizontally and vertically
  • Equatorial: enables precise tracking of objects with only one axis – ideal for high magnifications and astrophotography

  • Moon: from 30 mm
  • Planets: from 100 mm
  • Deep sky: from 150 mm
Are you a member of an astronomy club? Find out here what your benefits are.
View conditions

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General warning instructions DANGER! RISK of bodily injury! Never look directly at the sun or near the sun through this device. There is a risk of blindness! Sharp-edged and pointed tools are often used with this device. Therefore, store this device and all accessories and tools in a place inaccessible to children. There is a RISK of injury! Children may only use the device under supervision. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! FIRE HAZARD! Do not expose the device – especially the lenses – to direct sunlight! The light concentration could cause fires. NOTE! Do not dismantle the device! In case of a defect, contact your dealer. They will contact the service center and may send the device in for repair. PRIVACY PROTECTION! The telescope is intended for private use. Respect the privacy of others – for example, do not use this device to look into apartments!
Skip product gallery

Accessories

EXPLORE SCIENTIFIC Zero X Field Flattener 2''/M48 for ED80, ED102 and ED127 APO
Field flattener without reduction factor for Explore Scientific ED80 , ED102 and ED127 APO Refractors The imaging plane of many telescopes is not flat but curved. This means that only the area in the centre is perfectly focused - the edge becomes blurred. The human eye can usually compensate for this image property, but a camera shows increasing blurriness towards the edge of the image field. The Explore Scientific Zero X field flattener eliminates the field curvature in many telescopes with a focal length of approx. 480 to 952 mm. The Zero X field flattener was calculated and developed for Explore Scientific ED80, ED102 and ED127 apochromats with focal ratios of F=6.0 and F=7.5. The image sharpness at the edge is dramatically increased. The stars appear round and no longer distorted - a clear benefit for the whole image aesthetics. The Zero X image flattener can be used not only with Explore Scientific Apos, but also with many other Apos. This flattener does not change the focal length of the telescope. Correction for up to full-frame camera sensors (24x36mm) The Explore Scientific Zero X image flattener has been developed due to the rapid development of ever larger camera sensors. With it, there is finally a field flattener available that illuminates and corrects the field of view for full-frame camera sensors up to 24x36 mm. How to use the Zero X field flattener with M48 thread connection This field flattener has a 2 inch (50.8 mm) plug-in connection on the telescope side, with which it is inserted into the telescope instead of an eyepiece or star diagonal mirror. On the camera side, there is a standardised M48 x 0.75 mm connection thread. This M48 connection thread offers a larger free inner diameter than the usual T2 (M42) thread and prevents vignetting when using large camera sensors. With an optionally available and camera-specific adapter ring, a DSLR camera can be connected to it. The working distance is already set at 55 mm. Of course, mirrorless cameras or special astro cameras can also be used with the M48 thread connection. For this, the appropriate M48 spacer sleeves or adapters are additionally required to set the right working distance of 55 mm. This must always be done with every corrector or field flattener so that the best possible field flattening is achieved.Filter thread on telescope side availableThe telescope-side 2.0 inch plug-in sleeve has an M48x0.75 filter thread (internal thread). Individual 2.0 inch colour or nebula filters can be inserted here to increase the contrast of the images.FEATURESField flattener for Explore Scientific ED80, ED102 and ED127 APO telescopesRemoves field curvature from telescopesProduces round stars even at the edge of the image fieldImage sharpness at the edge is drastically increasedA clear benefit for the whole image aestheticsCorrection of field curvature for up to full-frame camera sensors (24x36 mm)Image field flattener without reduction factorOn the telescope side with 2 inch (50.8 mm) plug-in connection and M48x0.75mm filter threadCamera side with large M48 threaded connectorWorking distance of 55 mm between field flattener and camera sensorFor telescopes with a focal length of approx. 480 to 952 mmOptimised for telescopes with focal ratios from F=6.0 to F=7.5Can also be used for various other APOsFully multi-coating on all lens surfacesHousing made of lightweight aluminium, black anodisedAluminium dust cap for M48 threadSCOPE OF DELIVERYZero X field flattener (1 piece)Dust caps

Available

€179.00*
EXPLORE SCIENTIFIC Extension Ring Set M48x0.75 - 5 pieces (30, 20, 15, 10 and 5 mm)
Five extension tubes from 30 to 5mm length with thread connection M48x0,75mm in a set. For adjusting different distances of the camera to the focal plane of the telescope or the corrector/field flattener. There is an M48.0,75 internal and external thread in each individual tube. The M48x0.75 thread is also called large T2 photo thread or 2.0 inch filter thread. Camera specific bayonet adapters or color and nebula filters can be used. Included are 5 different tubes with the steps 30, 20, 15, 10 and 5 mm. The larger free inner diameter of 45.0 mm effectively prevents undesired vignetting of the camera sensor. The outer diameter of the sleeves is exactly 50.65 mm and can therefore be mounted directly in any 2 inch diameter eyepiece adapter. FEATURES Extension sleeves M48x0,75 in set Five extension sleeves: 30, 20, 15, 10, 5 mm Use with correctors and field flatteners Distance adjustment from camera to focal plane Suitable for camera-specific bayonet adapters Also suitable for 2.0 inch colour and nebular filters Internal and external thread M48x0.75 mm (large T2 thread) Large inner diameter of 45.0 mm Outer diameter is 50.65 mm (2 inches) Black matt anodized aluminium Total weight 85 grams SCOPE OF DELIVERY Extension sleeves M48x0.75 (5 pieces)

Available

€55.00*
Skip product gallery

Customers also bought

EXPLORE SCIENTIFIC Extension Ring Set M48x0.75 - 5 pieces (30, 20, 15, 10 and 5 mm)
Five extension tubes from 30 to 5mm length with thread connection M48x0,75mm in a set. For adjusting different distances of the camera to the focal plane of the telescope or the corrector/field flattener. There is an M48.0,75 internal and external thread in each individual tube. The M48x0.75 thread is also called large T2 photo thread or 2.0 inch filter thread. Camera specific bayonet adapters or color and nebula filters can be used. Included are 5 different tubes with the steps 30, 20, 15, 10 and 5 mm. The larger free inner diameter of 45.0 mm effectively prevents undesired vignetting of the camera sensor. The outer diameter of the sleeves is exactly 50.65 mm and can therefore be mounted directly in any 2 inch diameter eyepiece adapter. FEATURES Extension sleeves M48x0,75 in set Five extension sleeves: 30, 20, 15, 10, 5 mm Use with correctors and field flatteners Distance adjustment from camera to focal plane Suitable for camera-specific bayonet adapters Also suitable for 2.0 inch colour and nebular filters Internal and external thread M48x0.75 mm (large T2 thread) Large inner diameter of 45.0 mm Outer diameter is 50.65 mm (2 inches) Black matt anodized aluminium Total weight 85 grams SCOPE OF DELIVERY Extension sleeves M48x0.75 (5 pieces)

Available

€55.00*
BRESSER Moon Filter for 1.0"/24.5mm Eyepieces
BRESSER Moon Filter for 1.0''/24.5mm Eyepieces Category: Spare Part suitable for BRESSER JUNIOR Telescope Series Description: The moon filter reduces glare and enhances contrasts during moon observations. Suitable for most models of the BRESSER Junior Telescope series. The robust construction ensures long-lasting use. Easy attachment with screw thread. Please measure the inner barrel diameter of the connection on your telescope before ordering.

Available

€5.90*
BRESSER Portable Power Supply 100 Watt
Portable power storage (mobile power bank) in maxi format from BRESSER. With a powerful and rechargeable 155Wh lithium-ion battery and various connection options, almost all common electronic devices can be operated and charged. This means that you always have sufficient energy reserve, whether for tough outdoor use, in the garden or in the event of a power failure at home. Including a switchable red light LED lamp with emergency signal function and a red light bar for orientation in the dark with over 100 hours of light duration. The Mobile Power Station is a silent and environmentally friendly alternative to power generators with combustion engines. With the built-in solar charge controller, the Power Station can also be charged directly with a solar panel (available as an option). Connection options: Charging of up to 3 x USB mobile devices such as telephones, cameras, drones etc. at the same time. Includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support. Power supply for up to 3 x 12 volt devices. With the 2 adapters of 5.5/2.1mm hollow plug to cigarette lighter socket included in delivery, car/camping devices such as refrigerators, water pumps, mini compressors, air pumps etc. can be connected directly. In addition, a 230 volt, 100 watt continuous power socket can be used to connect chargers for notebooks/tablets/smartphones etc. or other electrical devices in this power class. The heart is the built-in battery: A powerful 155Wh 13Ah/12Volt (42000mA/3.7V) lithium-ion battery. Rechargeable within 8 hours with the included 230V charger or 12V car battery charging cable. A clear display shows you all relevant information such as battery charge status, battery charging process, AC output ON/OFF. Extensive electronic protection of all current inputs and outputs: against short circuit, overvoltage, over- and deep discharge of the battery and against overheating. Please note that for use with our astronomy mounts, such as the EXOS-2 Goto, the adapter cable 4930100 is additionally required.FEATURESPortable energy storage (Power Bank)Self-sufficient power supply for outdoor, hobby and professional useCharging and operation of various electrical appliancesMany connection options and adapters includedEnvironmentally friendly alternative to power generatorsPowerful 155Wh 13Ah/12 Volt (42000mA/3.7V) lithium ion battery3 x USB (each 5-9 Volt 2.1 Ampere), includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support3 x 12 Volt DC out 5.5/2.1mm hollow plug (additional max. 15 Ampere /180 Watt)1 x 230 Volt AC out (100 Watt continuous power)Modified sine wave for 230 Volt outputSimultaneous charging and power extraction possibleElectronic charge monitoring and switch-offBright red light LED lamp with over 100 hours light durationSOS function of the LED lamp by selectable flashing functionRed light bar can be switched on as an orientation aid in the darkIndication of battery charge status on displayInput charging socket: 13-25 Volt / 2 Ampere / input protection circuit existsCharging time 0-100% approx. 8 hoursIntegrated solar charge controller for direct charging via solar panelTemperature range: from -10 to +40 degrees CelsiusLifetime/charging cycles: >500 times SCOPE OF DELIVERYPower Station with batteryCharger 230 VoltCar charger 12 VoltAdapter 5.5/2.1mm to cigarette lighter socket (2 pcs.)UK socket adapter for 230V outputInstruction manual

Available

€169.00*
EXPLORE SCIENTIFIC 62° LER Eyepiece 9mm Ar
If a observing session is a relaxing and joyful experience is heavily dependend on the choice of eyepieces. People wearing glasses very often have the problem to see the entire field of view when they are using eyepieces with large apparent fields. This problem is now history. The new 62°- LER eyepieces by Explore Scientific do not only offer excellent image sharpness and high resolution and contrast over the full field of view - you can see that full field without problems even with glasses on. Fatigue due to tense head positioning and strained viewing simply does not happen because of the excellent viewing comfort these eyepieces provide even to observers wearing glasses. Enjoy the unique combination of excellent image sharpness out to the edge of the field even for fast optics, superior contrast and unmatched viewing comfort. Eyepieces with perfect combinations of various modern glass substrates and highest standards in manufacturing, quality control and service are a tradition at Explore Scientific - the outstanding resolution and sharpness to the very edge.These eyepieces are the choice for observers wearing glasses - with excellent performance and durability. The rubber inlet and the foldable eyecups make handling and using in the field easy. The patentet EMD"-coating produces high contrast images and prevents reflexes and ghosting. The argon purging effectively prevents internal fogging, and you don´t have to deal with dirt, fungus or cleansing fluids getting between the lenses. The eyepieces are sealed - this makes sure you will be able to enjoy these eyepieces for many years to come.Eye relief: 12mm

Currently unavailable

€105.00*
BRESSER Set Portable Power Supply 100W + Solar Panel 40W
Our set of efficient solar panel and powerful power station provides you with sustainable energy whenever and wherever you need it. Whether you're camping, in the garden, or keeping it as a backup at home – with this powerful combo, you are always well-equipped to easily harvest and store green energy.Power station detailsPortable power storage (mobile power bank) in maxi format from BRESSER.With a powerful and rechargeable 155Wh lithium-ion battery and various connection options, almost all common electronic devices can be operated and charged. This means that you always have sufficient energy reserve, whether for tough outdoor use, in the garden or in the event of a power failure at home. Including a switchable red light LED lamp with emergency signal function and a red light bar for orientation in the dark with over 100 hours of light duration. The Mobile Power Station is a silent and environmentally friendly alternative to power generators with combustion engines. With the built-in solar charge controller, the Power Station can also be charged directly with the included solar panel. Connection options: Charging of up to 3 x USB mobile devices such as telephones, cameras, drones etc. at the same time. Includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support. Power supply for up to 3 x 12 volt devices. With the 2 adapters of 5.5/2.1mm hollow plug to cigarette lighter socket included in delivery, car/camping devices such as refrigerators, water pumps, mini compressors, air pumps etc. can be connected directly. In addition, a 230 volt, 100 watt continuous power socket can be used to connect chargers for notebooks/tablets/smartphones etc. or other electrical devices in this power class. The heart is the built-in battery: A powerful 155Wh 13Ah/12Volt (42000mA/3.7V) lithium-ion battery. Rechargeable within 8 hours with the included 230V charger or 12V car battery charging cable. As an eco-friendly alternative the included solar panel can be used for charging. A clear display shows you all relevant information such as battery charge status, battery charging process, AC output ON/OFF. Extensive electronic protection of all current inputs and outputs: against short circuit, overvoltage, over- and deep discharge of the battery and against overheating. Please note that for use with our astronomy mounts, such as the EXOS-2 Goto, the adapter cable 4930100 is additionally required.Solar charger detailsSimply open it up, put it down and immediately produce green solar powerThe handling is very simple: unfold the solar panel and align it as perpendicularly as possible to the sun. Then connect the device to be charged to the solar charger, either with a suitable USB cable (not included) or with the included DC connection cable. The charging process begins immediately. Which devices can the solar panel charge?Apart from the included power station the solar charger gets all devices with a USB power supply connection or the above-mentioned DC power plug connection up and running again in no time – e.g. smartphones, tablets, power banks, portable playstations, MP4 players, GPS devices and Bluetooth headphones.Universal charger with flexible connection optionsTwo black USB A sockets for normal charging and another orange USB A socket with QC3.0 standard for fast charging of newer generations of devices are available for powering your devices. An additional universal connection cable with a hollow DC plug 5.5/2.1 mm in diameter and 2.5 metres long, as well as 3 plug adapters (3.5/1.35 mm, 5.5/2.5 mm, 8.0/5.5/0.8 mm) are included in the scope of delivery. The polarity of the connectors is as follows: Inner contact = positive (+), outer contact = negative (-). How long does it take to charge a battery?Most modern devices with built-in batteries indicate the current charging status of the battery on a display or status LEDs. The charging process is also automatically terminated by the internal charger of the smartphone or tablet, etc., as soon as the battery is full.Nevertheless, it is helpful to know how long a full charge theoretically takes with an empty battery. This is the only way to choose the right solar panel model for the requirements of the devices you want to charge.Here is a short calculation: Divide the capacity of the battery (mAh) by the charging current of the charger (mA) and multiply this by a factor of 75. This then gives you the approximate charging time in minutes that is required to fully charge the battery at 100% sunshine duration.Example: A battery with a capacity of 3000mAh (3.0 Ah) and a charging current via 5 volt USB connection of 3100mA (3.1 amps). So 3000 : 3100 x 75 = 73 minutes. Dividing the result by 60 gives the charging time in hours: 1.2 hours.This means that an average smartphone can be fully charged in just about 1.2 hours with a 40-watt solar panel.   Carabiner hooks for attachment includedIn order to attach the solar panel securely to an object and align it perfectly with the sun, 4 sturdy snap hooks are included in the scope of delivery. Simply connect them to the riveted ring eyelets of the solar panel and use them to hang the solar charger stably, e.g. on a tent loop, a fence or other suitable holding points. Innovative solar cell technology with high efficiency Monocrystalline silicium cells ensure high efficiency and the fastest possible charging of the device batteries. This means maximum electricity yield per solar surface. As a result, you benefit from relatively high charging currents and short charging times with a compact design.Easy transportThanks to the modern and flat design, you can easily fold the individual segments of the solar panel into a small bag and stow it in your luggage while saving space. Always ready for the next spontaneous use.Robust, dust- and water-repellent materials The durable Cordura fabric is extremely tear-resistant but still flexible. It protects the valuable solar panel from damage and provides the necessary stability during use. The solar panel is dust- and water-repellent, it withstands most weather conditions and is your ideal companion for almost all outdoor activities. Nevertheless, the solar panel should not be exposed to direct rain or extreme humidity.IMPORTANT NOTESThe solar panel does not have an integrated charger or charge controller. Therefore, it is not suitable for directly charging loose battery cells or lead batteries. It is only suitable for smartphones, tablets and power banks, for example, because they always have built-in internal chargers.The solar panel does not have its own battery, but serves exclusively as a power source in sunshine for charging electronic devices.When connecting the devices to be charged via the DC bar plug, always ensure the required voltage and correct polarity. Otherwise, damage may occur to the electronics of the solar panel and the devices to be charged.Do not leave the solar panel outdoors at night with high humidity or in the rain. This could damage the internal electronics. FEATURES POWER STATIONPortable energy storage (Power Bank)Self-sufficient power supply for outdoor, hobby and professional useCharging and operation of various electrical appliancesMany connection options and adapters includedEnvironmentally friendly alternative to power generatorsPowerful 155Wh 13Ah/12 Volt (42000mA/3.7V) lithium ion battery3 x USB (each 5-9 Volt 2.1 Ampere), includes 1 x USB quick charge output with Qualcomm Quick Charge 3.0 support3 x 12 Volt DC out 5.5/2.1mm hollow plug (additional max. 15 Ampere /180 Watt)1 x 230 Volt AC out (100 Watt continuous power)Modified sine wave for 230 Volt outputSimultaneous charging and power extraction possibleElectronic charge monitoring and switch-offBright red light LED lamp with over 100 hours light durationSOS function of the LED lamp by selectable flashing functionRed light bar can be switched on as an orientation aid in the darkIndication of battery charge status on displayInput charging socket: 13-25 Volt / 2 Ampere / input protection circuit existsCharging time 0-100% approx. 8 hoursIntegrated solar charge controller for direct charging via solar panelTemperature range: from -10 to +40 degrees CelsiusLifetime/charging cycles: >500 times FEATURES SOLAR PANELSolar panel with output power of max. 40 wattsSolar panel for charging battery-powered devicesSuitable for smartphones, tablets and power banks etc.Simply unfold, point towards the sun and the charging startsStay independent even without a 230-volt socketFree electricity through solar energyNo emissions and zero noiseConnection via 3 x USB A and DC hollow plug with adaptersIncludes one orange USB A jack with QC3.0 for fast chargingMonocrystalline silicium cells with high efficiencyEnables high charging currents and short charging timesCompact transport dimensions due to foldable designRobust, dust- and water-repellent materials Ideal for all outdoor activitiesSPECIFICATIONS SOLAR PANELOutput power of the solar panel: 40 wattsOutput voltage at the DC connection cable: 18 voltsOutput current at the DC connection cable: max. 2.2 ampsUSB A sockets: 2 x black USB and 1 x orange USB QC3.0 (for quick charging)Output voltage at the black USB A sockets: 5 voltsOutput current at the black USB A sockets: max. 3.1 ampsOutput voltage and current at the orange USB A QC3 socket: 5V3.4A/9V2.5A/12V2.0ADC connection cable length: 2.5 metresDC plug adapters: 3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mmPolarity of DC connectors: inner contact = positive (+), outer contact = negative (-)Transport dimensions when folded: 355 x 320 x 45 mmDimensions when unfolded: 1090 x 350 x 30 mmWeight: 1.9 kgSCOPE OF DELIVERYPower Station with batteryCharger 230 VoltCar charger 12 VoltAdapter 5.5/2.1mm to cigarette lighter socket (2 pcs.)UK socket adapter for 230V outputSolar panel 40 Watt (1 piece)Carabiner hook (4 pieces)Integrated DC connection cable (1 piece)Plug adapter (3 pieces)User manual

Available

€255.00*
Skip product gallery

Customers also viewed

BRESSER T2 Extension Tube Set
Set of 5 extension tubes with T2 thread on both sides for exact distances and secure hold of cameras for astrophotography. Also comes with SC to T2 thread adapter.In astrophotography, most cameras are connected to a telescope via a T2 thread (M42x0.75), the most popular international standard. However, in many cases, T2 and T2-ring adapters for connecting telescope focusers to a camera are not sufficient, as specific distances must also be observed. This is especially important when using correctors, reducers or flatteners. This extension tube set, which consists of 5 mm, 7.5 mm, 10 mm, 15 mm and 30 mm tubes, will allow you to obtain almost any distance using the corresponding combination. Each tube has a T2 interior thread on one side and a T2 exterior thread on the other side.Most telescopes either include a T2 thread adapter, or the eyepiece can be used with a simple T2 thread adapter with a 2” plug-in diameter (item no. 0510365).However, Maksutov-Cassegrain, Schmidt-Cassegrain, ACF or Ritchey–Chrétien telescopes may use a so-called SC thread. To allow you to use this extension tube set with these telescopes, the set also includes an SD to T2 thread adapter.FEATURES5 T2 tubes with lengths from 5 mm to 30 mmCombination of tubes allows you to obtain distances of 5 mm to 67.5 mmFor exact camera distances in astrophotographyDELIVERY CONTENT5x T2 extension tubes (5/7.5/10/15/30 mm)1x SC to T2 thread adapter

Available

€29.00*
EXPLORE SCIENTIFIC Extension Ring Set M48x0.75 - 5 pieces (30, 20, 15, 10 and 5 mm)
Five extension tubes from 30 to 5mm length with thread connection M48x0,75mm in a set. For adjusting different distances of the camera to the focal plane of the telescope or the corrector/field flattener. There is an M48.0,75 internal and external thread in each individual tube. The M48x0.75 thread is also called large T2 photo thread or 2.0 inch filter thread. Camera specific bayonet adapters or color and nebula filters can be used. Included are 5 different tubes with the steps 30, 20, 15, 10 and 5 mm. The larger free inner diameter of 45.0 mm effectively prevents undesired vignetting of the camera sensor. The outer diameter of the sleeves is exactly 50.65 mm and can therefore be mounted directly in any 2 inch diameter eyepiece adapter. FEATURES Extension sleeves M48x0,75 in set Five extension sleeves: 30, 20, 15, 10, 5 mm Use with correctors and field flatteners Distance adjustment from camera to focal plane Suitable for camera-specific bayonet adapters Also suitable for 2.0 inch colour and nebular filters Internal and external thread M48x0.75 mm (large T2 thread) Large inner diameter of 45.0 mm Outer diameter is 50.65 mm (2 inches) Black matt anodized aluminium Total weight 85 grams SCOPE OF DELIVERY Extension sleeves M48x0.75 (5 pieces)

Available

€55.00*
Camera Bajonet Adapter Canon R/RP to T2/M42 thread
T-Mounts / Bajonet adapters are the connecting piece between the photo adapter and the camera. Please read the instruction manual of your camera to find out which T-Mount / Bajonet adapter you need, look into the instruction manual of your camera. Connect your BRESSER Microscope or Telescope with a Canon R/RP camera and take images or videos of your observed object!FEATURESCapture photos through your telescope or microscopeConnecting piece between the photo adapter and Canon R/RP cameraHigh-quality and precise workmanship made of metalA corresponding photo adapter is neededConnecting thread: T2 / M42x0.75 femaleOptical path: 10.0 mmSCOPE OF DELIVERYT2 Ring / Bajonettadapter for Canon EOS R/RP

Available

€24.90*
BRESSER T2 ring Canon EOS
T-Mounts are the connecting piece between the camera adapter and the SLR camera. Please read the instruction manual of your camera to find out which T-Mount you need, look into the instruction manual of your camera. Connect your BRESSER Microscope or Telescope with a Canon EOS SLR camera and take images or videos of your observed object!FEATURESConnecting piece between the camera adapter and Canon EOS SLR cameraHigh-quality and precise workmanship made of metalA corresponding camera adapter is neededSCOPE OF DELIVERYT2 Ring Canon EOS

Available

€24.90*
%
Vixen focal adapter for Canon EOS
The Vixen focal adapter can be used to connect your DSLR camera to your telescope via a 60-mm thread. The large internal diameter of the adapter prevents shadows at the edges of the image when using a full-frame DSLR camera. The focal adapter can also be rotated to rotate the field of view selection. Three locking screws are provided for clamping.Note: Vixen T2 ring also required for your Canon. In this case, the inner ring is removed from the T2 adapter and clamped using three small grub screws.FEATURES60-mm connection thread for OAZWeight: 56 gT-ring for Canon EOS also requiredPACKAGE CONTENTSVixen focal adapter for Canon EOS

Available

€43.00* €54.00* (20.37% saved)
%
Smartclip Converter PK52/351 Krypton XG50
Converter for Pulsar Krypton XG50 or Proton XQ30This adapter provides an easy to way for you to connect the Smartclip AS adapter to your Krypton. Made from ultra-strong aluminium from the aviation industryHard anodizedInformation: The converter must be removed from the attachment in order to use the monocular.

Available

€74.99* €79.00* (5.08% saved)