EXPLORE SCIENTIFIC Teleextender 3x 50,8mm/2"

THE PMC-EIGHT GOTO SYSTEM JUST AWARDED A SKY AND TELESCOPE HOT PRODUCT FOR 2018. The Explore Scientific EXOS2-GT with PMC-8 Electronics is quite unique and special. Most of the serious amateur mounts on the market today offer single processors. The PMC-8 electronics are extremely robust. They include a 2-Channel Multi-Processor Micro-controller with 8 CPUs that run independently and are completely deterministic in their behavior, thus the name PMC-8. Within this multi-processor system is a 64 Kbyte EEPROM Non-Volatile Memory bank used to store parameters; a Wireless Ethernet 10/100 with full IP function which permits operation from anywhere using a browser, ASCOM, or APP over the web or serial port; and Non-Volatile Memory used to store user selected parameters. The electronics also includes an Auto-Guide port (ST4 contact input) and features the only wireless ASCOM driver on the market. The belt driven system uses 2 timing pulleys (1-45 groove and 1-10 groove) with fiberglass re-enforced neoprene belt connected to a Nema11 bi-polar stepper .67 amps 12ncm motor then connected to the worm. Precise ball bearings in both axes ensures minimal backlash at all nine possible tracking speeds. The included battery pack (12 V) takes eight size "D" batteries. The head rests on a very tough and rigid stainless steel tripod with adjustable 2" legs from 26.8" to 42.5" and can support up to 28 lbs. of equipment. This system is all controlled from a tablet, notebook or desktop pc with 7" display and WIN8.1, WIN10+11, iOS or Android 4.4 with a beautiful full graphical user interface using our very own ExploreStars OpenGoto® Software. The ExploreStars OpenGoto® Software has the same basic functions as most all other mounts on the market today. ExploreStars is a free App downloadable from the Microsoft App store and GooglePlay. The basic download includes a standard 2 star or 3 star alignment procedure, over 70,000 star database, the Messier Catalog and Solar System objects. The software interface features a Classic four-button pattern for guiding, centering, moving and slewing on the touch screen of your tablet or phone. Pull-down menus open to offer the intuitive 2 star and 3 star alignment procedure, selection of the various catalogs, guided tours, the sync button, the park position, search feature and the coordinate input screen to enter RA and DEC coordinate information. Numerical key pad allows for selectable and user enterable GOTO speeds for slewing, centering and guiding rates. You can also set sidereal, king, lunar, solar, and user defined tracking rates. What makes this software different is that YOU can write your own code and import it into this software. Create a Messier challenge. Create a selectable list of objects you want to photograph and program that information into the software. With the ability to write your own code, you can create whatever your heart desires. Share it with the community of astronomers that are using this software. In addition, this mount can be controlled by any ASCOM compliant software using the built-in wireless ASCOM driver. GPS-compatible and auto time / date settings are dependent on optional receiver on computer, tablet or phone.Here are most of the ASCOM software packages available for use with the Explore Scientific / Losmandy G-11 with PMC-8 mount: ACP; APT; AST / ATC & Ricerca (Omega Lab); AstroArt; AstroMB; Cartes du Ciel / Sky Chart; CCD AutoPilot; DeepSky; Deepsky Planner; DFM Engineering; Earth Centered Universe Pro; EasySky; Eye and Telescope; Project Pluto; Hallo Northern Sky; Maxim DL; MaxPoint; PinPoint Astrometric; Prism; Sequence Generator Pro; Sidereal Technology; The Sky; SkyMap Software; SkyTools 3; Star Atlas PRO; Sky Observer; StarryNight; Stellarium; Virtual Moon Atlas; and WorldWide Telescope.VIDEO REVIEW:https://youtu.be/tmNPajsd9H4 IMPORTANT NOTE: To start using ExploreStars app, download the free app and download the celestial data set that contains the astronomical catalogs, reference images, and reference text. Simply by unzipping the ExploreStars folder containing the expanded celestial data set into your Pictures directory, you will expand the native database from a thousand objects to over seventy thousand objects.SOFTWARE DOWNLOAD: https://explorescientificusa.com/pages/software-and-downloads-for-pmc-eight-systemFEATURESUnique PMC-8 Open Goto SystemBeautiful full graphical user interface using our very own ExploreStars OpenGotoWifi controlled by Tablet, Notebook or Desktop PC with 7" or larger display, and Wifi function (not included)Needed system software of optional computer or tablet: WIN8.1, WIN10/11, iOS or Android 4.4 or higherClassic four-button pattern and joystick for guiding, centering, moving and slewing on the touch screenIntuitive 2 star and 3 star alignment procedureMultiprocessor Micro Controller with 8 CPU´sMicro-Stepper Motors NEMA-11Highly accurate and silent Belt-Drive System ST-4 compatible autoguider portASCOM Driver available: YES, supports also Pulse-GuidingYOU can write your own code and import it into this softwareGPS-compatible and auto time / date settings are dependent on optional receiver on computer, tablet or phoneSCOPE OF DELIVERYExplore Scientific EXOS2-GT with Open GOTO PMC-8Stainless steel tripod with 2" legs and bubble levelCounter weight 2 x 4,5 kg Polefinder with illumination unitPower supply 12 volts / 2,0 ampereExploreStars Software via downloadIMPORTANT NOTE: This package doesn´t include any WINDOWS/iOS/Android Computer or Tablet.FAQ / KNOWLEDGE-BASE:  https://explorescientificusa.com/pages/explore-scientific-knowledge-base-and-faqsPMC-Eight GROUPS:  https://espmc-eight.groups.io/g/MAIN

Explore Scientific 82° Series™ extreme wide field eyepieces are optimized to produce high contrast, high resolution, and superior flat field characteristics. The visual effect of these eyepieces with their long eye-relief and their 82° apparent field is truly a full-immersion experience. Your eye is relaxed, allowing you to easily use the "averted vision" technique to study faint details across a huge field-of-view. The 82° Series eyepieces come with a twist-up rubber eye-guard that raise to the desired height for the comfort of the observer, and as experienced astronomers know, eye comfort is critical when trying to observe at the visual limits of the telescope. To keep internal reflections to a minimum, all internal surfaces of the eyepiece barrel are flat black, as well as the edges of the lenses themselves to minimize the scattering of light within the lenses themselves. All 82° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.

This Barlow lens doubles the focal length of your telescope. It allows you to make astronomical observations with a higher magnification than a conventional eyepiece. Thanks to the Barlow lens between the eyepiece, you can obtain a greater magnification whilst maintaining a comfortable interpupillary distance.This Vixen 2x Barlow lens is ideal for observing and photographing lunar landscapes and details on the brighter planets. The Barlow lens also features a T2 connection for photography with DSLR cameras. With T2 extension tubes, it can also be used as a camera projection adapter.With a deflecting prism, the Barlow lens enables you to obtain a magnification factor of 3.3x.FEATURES2x Barlow lenses with T2 thread2-lens optical systemDoubles the magnification factorAlso suitable as a camera adapter31.7 mm sleeveWeight: 80 gDELIVERY CONTENT 2x Barlow lenses Dust caps

Universal 60mm viewfinder and guide telescope with a focal length of 250mmExcellent 10x60 viewfinder telescope with removable eyepiece unit and crosshairs with adjustable red illumination. The larger aperture and focal length, provide an even brighter field of view and more accurate tracking due to the higher resolution. The precise helical focuser and the 1.25 inch /31.7mm plug-in connection, as well as the T2 camera connection thread (M42x0.75mm), allow the autoguiding required for long time exposure to obtain a point-shaped star image. It can also be used as a mini travel telescope.High quality 10x60 viewfinder telescope with adjustable crosshair illuminationImage sharpness and viewing characteristics lift this viewfinder well above the level of the usual 10x60 viewfinder scopes. The visible image is bright and crisply sharp. Furthermore, this viewfinder has a very large field of view (FOV) of 6.0 degrees. This makes finding and adjusting objects much easier. The existing scale markings (pitch=0.85 degree) on the crosshair are a good reference for estimating distances, and the open centre markings also make it easier to centre objects precisely. All lens surfaces are protected against weathering by multi-coating and guarantee a bright viewfinder image due to the high light transmission values. The adjustable red LED illumination unit is powered by two LR41 coin batteries. The main lens and the crosshairs can be focused independently of each other, giving you perfect focus for your eyes.Compact tracking unit for autoguidingOne of the main applications for this telescope is the so-called autoguiding. Here the usually larger photo-taking optics are actively corrected by a smaller guiding telescope with a second tracking camera. This means that the mechanical fluctuations in the tracking accuracy, which are present in all astronomical telescope mounts, are measured by the tracking camera and compensated accordingly. This is necessary in order to obtain a point-shaped star image on the astrophotos during long time exposures and to avoid unwanted star trails. For this purpose, the guiding telescope is inserted into the existing viewfinder shoe of the photo-taking optics and aligned parallel. If the existing viewfinder shoe is not compatible, a suitable viewfinder shoe is also included. With the 1.25 inch / 31,7mm plug connection at the rear end or via T2 thread connection (M42x0,75mm), a tracking camera can be mounted afterwards. This is held securely by a brass ring clamp and 3 clamping screws. Please note the required back focus for your tracking camera. The focal plane (backfocus) is approx. 22mm behind the T2 thread. The sensitive focusing on the guiding star is done by a large knurled wheel of the mechanically precise manufactured helical focuser. For easy reproduction of the point of focus, this has a white millimetre scale from 0 to 28mm, which is attached by laser engraving. After the tracking camera has been connected directly or via computer to the telescope mount and the necessary basic settings have been made, the first astrophotos with long time exposure can be taken.Use as mini travel telescopeThis viewfinder and guide telescope can also be used quite simply as a mini travel telescope. With the optional eyepieces, a magnification of 9x to 50x can be achieved. Nearly all eyepieces with a focal length of 5 to 26mm and 1.25 inch/31.7mm plug connection are suitable. Especially recommended are the EXPLORE SCIENTIFIC eyepieces of the 52 degree (Art. 02195xx) and 62 degree (02196xx) LER series. Note: Only straight view use is possible.Metal viewfinder holder and viewfinder shoeThe mount of this viewfinder and guide telescope is completely made of aluminium and is a stable base. The viewfinder mount is suitable for many common types of telescopes, such as EXPLORE SCIENTIFIC, BRESSER MESSIER etc. If the existing viewfinder shoe is not compatible, a matching viewfinder shoe is also included. This can be attached to the telescopic tube by means of four M5 screws. The bore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axis. The six large adjustment screws with non-slip knurling make it easy to align the viewfinder, even with clammy fingers. All adjusting and clamping screws have plastic tips that effectively prevent the viewfinder housing and viewfinder mount from being scratched.FEATURESExcellent 10x60 viewfinder and guiding telescopeCan also be used as mini travel telescopePerfect image sharpness and good viewing comfortFMC Multi-coated lens surfacesLens focal length: 250mmMax. possible camera weight: 550gRemovable eyepiece/cross hair unitCamera connection via 1.25 inch / 31.7mm plug connection or T2 threadT2 thread: M42 x 0,75mmPrecise helical focuser for focusing the visible imageFocuser travel range: 28mmClose focus distance: 3 mLaser engraved millimetre scale from 0 to 28mm on the focuserFocal plane (backfocus) is approx. 22mm behind the T2 threadSeparate focusing of the crosshair at the eyepieceVery large field of view FOV of 6.0 degreesWith adjustable red cross-hair iillumination Scale markings crosshair with 0,85 degree graduationPower supply of illumination unit: coin battery type LR41 (2pcs)Brass ring clamp and 3 clamping screws on the 1.25 inch plug connectionWith optional eyepieces magnifications from 9x to 50x can be achievedSuitable are almost all eyepieces with 1.25 inch/31,7mm shaftMounting of the viewfinder telescope is completely made of aluminiumViewfinder mount with 6 large adjustment screws with knurled head for easy gripFinder shoe suitable for EXPLORE SCIENTIFIC, BRESSER MESSIER etc.Additionally a suitable viewfinder shoe is includedBore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axisAdjusting and clamping screws have plastic tipsWHAT'S INCLUDED10x60 viewfinder/guiding telescopeEyepiece unit with crosshairCrosshair illumination unit incl. batteriesViewfinder holder with viewfinder shoeInstruction manual

Enables you to connect a camera to telescopes that accept 2" barrel eyepieces. You will need a T2-ring for your special camera type also. The very special feature of this adaptor is the very short mechanical design (2.0mm) which enables the camera use also on telescopes with a short focal range. This adapter is also prepared to use with 2" filters.   

With the introduction of the 68° Series we are pleased to make two important improvements in eyepiece manufacture, the first being 15 layer Enhanced Multi-layer Deposition (EMD™) coatings on all glass-to-air surfaces to gain maximum contrast, and waterproofing the eyepiece with the use of Argon gas purging instead of standard Nitrogen gas. Although Nitrogen is a fine choice that will last for many years, Argon is a larger molecule that maintains its protective properties over a wider range of temperatures, and is even more resistant to diffusion thereby further extending the protective waterproof environment of the eyepiece body. Through computer-optimized design, a careful selection of optical glasses, and enhanced multi-layer deposition coatings, the Explore Scientific 68° Series™ eyepieces produce long eye-relief and ensure high image-correction, a flat field, and high contrast across the entire image field. An excellent choice for those who make extended visual studies of detail with subtle variations of brightness, and for those who must wear glasses while observing. All 68° Series eyepieces are fully EMD (Enhanced Multi-Layer Deposition) coated and edge-blackened to produce superior contrast.