Skip to main content Skip to search Skip to main navigation

EXPLORE SCIENTIFIC TELRAD Base Plate

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and the direct path to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the item number or EAN and open the appropriate help page directly.

Service Portal

Guides & Tips

FAQ - Frequently Asked Questions

That is normal. Finder scopes are only used to make objects easy to locate. The image orientation does not matter for observation.

  • Alt-azimuth: easy to use, moves horizontally and vertically
  • Equatorial: enables precise tracking of objects with only one axis – ideal for high magnifications and astrophotography

  • Moon: from 30 mm
  • Planets: from 100 mm
  • Deep sky: from 150 mm
Are you a member of an astronomy club? Find out here what your benefits are.
View conditions

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General safety instructions DANGER Risk of eye injuries! Never look directly at the sun or near the sun through this device. There is a risk of blindness! Children should only use the device under supervision. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! FIRE HAZARD! Do not expose the device – especially the lenses – to direct sunlight! The light concentration could cause fires. RISK of material damage! Do not dismantle the device! In case of a defect, please contact your dealer. They will contact the service center and may send the device in for repair. Do not expose the device to temperatures above 60°C!
Skip product gallery

Accessories

EXPLORE SCIENTIFIC TELRAD Projection Finder Scope with base
The TELRAD viewfinder is a projection finder that can be installed on any telescope and makes it child's play to align the telescope with the starry sky.The TELRAD viewfinder is a practical alternative to classic optical viewfinders and illuminated red dot viewfinders. You can see the complete starry sky without magnification, and not just a small section as with a normal optical viewfinder. Against this background of the starry sky, three red luminous concentric rings are projected, with apparent diameters of 4 degrees, 2° and 0.5° in the sky. Move the telescope so that the object you are looking for is in the inner ring, and the telescope points in the right direction. Because the object you are looking for is inside the ring, it will not be irradiated like a normal illuminated red dot finder.The base of the TELRAD viewfinder is self-adhesive and can be mounted on all telescopic tubes from about 10cm diameter. The length of the base is about 18cm. This base remains on the telescopic tube, the TELRAD viewfinder itself can be removed or attached at any time by means of the attached quick coupling. The TELRAD is powered by two normal AA batteries (not included).There are star atlases, like the "Deep Sky Travel Atlas" from Oculum-Verlag, and planetarium programs for the PC, like the program "Stellarium", where the three rings of the TELRAD are already drawn or can be displayed around the interesting celestial objects. This makes finding these celestial objects a real walk.FEATURESTELRAD projection finderIlluminated rings of 4 degrees, 2° and 0.5° in the skySee the complete starry sky without magnificationEasy installation and useCan be installed on nearly every telescopesBase with quick release coupling included Powered by two AA batteries (not included) Very long battery life because of LED technologySCOPE OF DELIVERYTELRAD viewfinder with projector and battery compartment TELRAD base with quick-release coupling for the viewfinder Adhesive tape for attachment to telescope

Available

€65.00*
Skip product gallery

Customers also bought

EXPLORE SCIENTIFIC TELRAD Projection Finder Scope with base
The TELRAD viewfinder is a projection finder that can be installed on any telescope and makes it child's play to align the telescope with the starry sky.The TELRAD viewfinder is a practical alternative to classic optical viewfinders and illuminated red dot viewfinders. You can see the complete starry sky without magnification, and not just a small section as with a normal optical viewfinder. Against this background of the starry sky, three red luminous concentric rings are projected, with apparent diameters of 4 degrees, 2° and 0.5° in the sky. Move the telescope so that the object you are looking for is in the inner ring, and the telescope points in the right direction. Because the object you are looking for is inside the ring, it will not be irradiated like a normal illuminated red dot finder.The base of the TELRAD viewfinder is self-adhesive and can be mounted on all telescopic tubes from about 10cm diameter. The length of the base is about 18cm. This base remains on the telescopic tube, the TELRAD viewfinder itself can be removed or attached at any time by means of the attached quick coupling. The TELRAD is powered by two normal AA batteries (not included).There are star atlases, like the "Deep Sky Travel Atlas" from Oculum-Verlag, and planetarium programs for the PC, like the program "Stellarium", where the three rings of the TELRAD are already drawn or can be displayed around the interesting celestial objects. This makes finding these celestial objects a real walk.FEATURESTELRAD projection finderIlluminated rings of 4 degrees, 2° and 0.5° in the skySee the complete starry sky without magnificationEasy installation and useCan be installed on nearly every telescopesBase with quick release coupling included Powered by two AA batteries (not included) Very long battery life because of LED technologySCOPE OF DELIVERYTELRAD viewfinder with projector and battery compartment TELRAD base with quick-release coupling for the viewfinder Adhesive tape for attachment to telescope

Available

€65.00*
EXPLORE SCIENTIFIC TELRAD Dew Shield with Mirror for 90 deg viewing
The TELRAD dew cap prevents the projection screen from fogging up in unfavourable weather conditions. With built-in 90° deflecting mirror for easier use in zenith position. The functionality is quite simple. If the TELRAD viewfinder is not used in the meantime, simply flip the dew cap over the viewfinder projection screen. This saves the annoying wiping off of the humidity and the viewfinder is always ready for use. The dew cap is made of impact-resistant plastic and additionally protects the viewfinder projection screen from scratches during transport. The retrofitting of the dew cap is very easy and is done by the two screws on the side.FEATURESdew cap for TELRAD projection viewfinderprojection screen cover when not in useprevents fogging of the projection screenbuilt-in 90° deflecting mirror made of impact-resistant plasticprotects the viewfinder from damageeasy installation on TELRAD viewfinderSCOPE OF DELIVERYdew cap, 1 piece 

Currently unavailable

€49.00*
EXPLORE SCIENTIFIC TELRAD Riser Base 51 mm (2")
The Riser Base increases the distance between the TELRAD viewfinder and the telescope tube. This allows a more comfortable view into the viewfinder. FEATURES Increases the distance between TELRAD viewfinder and telescope tube Enables a more comfortable view into the viewfinder Dimensions: 180 x 60 x 51 mm; weight: 100 g SCOPE OF DELIVERY 1x TELRAD Riser Base 51 mm (2")

Currently unavailable

€29.00*
%
LUNT CAA-RF 0.8x reducer/field-flattener for nighttime photography with LS80MT, LS100MT & LS130MT telescopes
​Field-flattener and focal length reducer for deep-sky astrophotography. Designed for the multipurpose APO telescopes of the Lunt-Solar-Systems LS80MT, LS100MT and LS130MT series.At the telescopes of the MT series from Lunt Solar Systems, the H-Alpha filter unit for solar observation can be removed, then these telescopes can be used as high quality ED APO's for observing and photographing the night sky.This accessory for the LS80MT, LS100MT and LS130MT telescopes shortens the focal length by a factor of 0.8x, providing a larger field of view for deep-sky astrophotography. This also allows shorter exposure times. At the same time, the field of view is flattened for photography.On the camera side, the reducer/field-flattener has a T2 male thread (M42x0.75). DSLR cameras can be connected here directly with a normal T2 ring.For other cameras, an M48x0.75 male thread is available in addition to the T2 male thread. The distance between reducer/field-flattener and camera sensor should be around 50 to 55mm.An M64x1 thread is provided on the telescope side. This allows to connect the reducer/field flattener to the focusers of the conversion kits for the LS80MT, LS100MT and LS130MT telescopes. Please note that for using the reducer/field flattener at the LS80MT, LS100MT or LS130MT telescopes, the corresponding conversion kit for night-time use of the telescope is absolutely necessary..FEATURESShortens focal length of F/7 ED telescopes by a factor of 0.8xFlattened field of view for photographyT2 thread and M48x0.75 thread for camera connectionWorking distance 50 to 55mmSCOPE OF DELIVERY0.8x reducer/field-flattenerAdapter to T2 thread (M42x0.75) and to M48x0.75

Available

€420.00* €598.00* (29.77% saved)
Skip product gallery

Customers also viewed

%
EXPLORE SCIENTIFIC Adapter 2.5 HEX auf M48x0.75
This adaptor connects accessories with the large open diameter of the M48x0,75 thread to the 2,5" Hexafoc. This avoids the vignetting that is caused by adaptors with a smaller diameter - ideal for astrophotographical accessories like off-axis guiders.The adaptor is made from black anodized aluminium.

Available

€47.00* €59.00* (20.34% saved)
%
EXPLORE SCIENTIFIC Pole Finder Scope for iEXOS-100 Mount
Optical pole finder scope for fast and precise polar alignment of the EXPLORE SCIENTIFIC iEXOS-100 EQ mount. The EXPLORE SCIENTIFIC Pole Finder Scope is used with the EXPLORE SCIENTIFIC iEXOS-100 EQ mount (Art. No. 0456100) and allows a very precise alignment to the celestial pole by unsing the illuminated crosshairs and constellation markings. Simply adjust the pole height and azimuth until the constellation markings in the polar finder match the constellations in the sky - that's it. Ideal for optimizing tracking accuracy in astrophotography. FEATURES Optical pole finder scope with illumination To optimize the polar alignment Suitable for EXPLORE SCIENTIFIC iEXOS-100 EQ mountIlluminated crosshairs and constellation markings Quick and easy to use SCOPE OF DELIVERYPolar finder scope iEXOS-100Mounting material Instruction manual  

Available

€69.00* €105.00* (34.29% saved)
EXPLORE SCIENTIFIC
The Pulser enables the setting of a flashing frequency of the projected graduated circuits. This improves the detection of faint objects, because the overlap with the graduated circuits is removed according to the flashing frequency. FEATURES TELRAD Pulser for illumination unit Enables setting of a flashing frequency of the projected graduated circuits For improved detection of faint objects SCOPE OF DELIVERY 1x TELRAD Pulser for illumination unit

Available

€33.00*
EXPLORE SCIENTIFIC Ultra Light Dobsonian 305mm GENERATION II
Ultra Light Dobsonian 305mm GENERATION II - with completely redesigned and improved construction.No telescope type has influenced amateur astronomy as radically as the dobsonian telescope. Before the introduction of this telescope type by John Dobson the vast majority of amateur telescopes were small inadequate refractors on shaky mounts - just good enough to show the polar regions on mars or the rings of Saturn. Bigger telescopes, like the Schmidt-Cassegrain telescopes, were restricted to the relatively small group of amateurs that could afford them.The brilliant combination of simple - but effective - mechanics and the largest aperture available led to a worldwide triumph of this concept. No other telescope type offers you so much light for your money as a good dobson. We have taken the motto "held together by gravity and driven by yoghurt power" and offer a modern version of the classic - designed by amateur astronomers for amateur astronomers. Despite its large aperture the telescope can be transported easily even in small cars and is assembled within minutes without tools. The construction was optimized for maximum rigidity with a minimum of mass. The combination of big altitude wheels and a optimized aluminium-sandwich construction allows for small movements even at high magnifications. The focus position is already positioned to accept our coma-corrector. The ideal workhorse for the deep-sky enthusiast. A telescope with 305mm aperture gathers more than 1800-times more light than the naked eye. Details on planetary surfaces stand out even to unexperienced observers, and countless deep-sky objects show details. Bright globular clusters are resolved down to the core and the view of the lunar terminator will provide a unforgettable experience.Dimensions for mobile use: Rockerbox 450mmx450mmx320mm; Mirrorbox 380mmx380mmx300mm; Trusses approx. 980mmEyepiece Height while pointing at zenith approximately 1,4m.12“ Net total weight: 32,1 kg; 12“ Mirror Box: 18,9 kg; 12“ Secondary cage +Rockerbox: 10 kg; 12“ 4 Pairs of trusses: 1,8kg; 12“ Altitude Wheels: 1,4kg ; Focuser thread: M54 x 0.75 mm ; Backfocus: 45mm behind the 2" eyepiece holder. 35mm when the 1.25" adapter is mountedSPECIFICATIONS Truss-Dobsonian Telescope in full Aluminium constructionNEW: Slider bearings made from TEFLON und GFK for smooth and precise movementNEW: Improved main mirror cell with completely redesigned mechanicsNEW: Altitude bearings with new designed brake and friction systemNEW: Larger feet to improve stabilityNEW: Universal finder slot to enable an easy finder upgradeNEW: Counter-weight system included - 2 x 1.0 kg NEW: Quick-lock fasteners with new springloaded design for comfortable useNEW: Powder-coated yellow altitude wheels to improve durabilityNEW: Laser engraved central mark on main mirrorSCOPE OF DELIVERYTruss Dobsonian TelescopeLED finder with standard finder slotStray light shield for secondary cageMain mirror collimation toolBattery compartment with bag for fansCounter-weights 2 x 1.0 kgExtension tube for focuserReducer 2"/1.25"Manual

Available

€1,249.00*
%
EXPLORE SCIENTIFIC 8x50 90°PolarFinder+Amici-Prism
Top viewfinder telescope with upright field, illumination, 90° view and pole viewfinder engraving - image sharpness and viewing behavior raise this viewfinder significantly above the level of the usual 8x50 viewfinder telescopes. The upright image field facilitates orientation. Multi-Coating on all surfaces. This polar finder is mainly intended for the observer with a transportable telescope. The 90° view facilitates operation, and with the help of the pole scale and the lighting, a telescope can be quickly and safely aligned to the celestial pole. The upright field of view makes the handling together with the high image sharpness a pleasant experience. The lighting is powered by two LR41 button cells.

Available

€149.00* €239.00* (37.66% saved)