EXPLORE SCIENTIFIC TELRAD Dew Shield

The Riser Base increases the distance between the TELRAD viewfinder and the telescope tube. This allows a more comfortable view into the viewfinder. FEATURES Increases the distance between TELRAD viewfinder and telescope tube Enables a more comfortable view into the viewfinder Dimensions: 180 x 60 x 51 mm; weight: 100 g SCOPE OF DELIVERY 1x TELRAD Riser Base 51 mm (2")

The TELRAD viewfinder is a projection finder that can be installed on any telescope and makes it child's play to align the telescope with the starry sky.The TELRAD viewfinder is a practical alternative to classic optical viewfinders and illuminated red dot viewfinders. You can see the complete starry sky without magnification, and not just a small section as with a normal optical viewfinder. Against this background of the starry sky, three red luminous concentric rings are projected, with apparent diameters of 4 degrees, 2° and 0.5° in the sky. Move the telescope so that the object you are looking for is in the inner ring, and the telescope points in the right direction. Because the object you are looking for is inside the ring, it will not be irradiated like a normal illuminated red dot finder.The base of the TELRAD viewfinder is self-adhesive and can be mounted on all telescopic tubes from about 10cm diameter. The length of the base is about 18cm. This base remains on the telescopic tube, the TELRAD viewfinder itself can be removed or attached at any time by means of the attached quick coupling. The TELRAD is powered by two normal AA batteries (not included).There are star atlases, like the "Deep Sky Travel Atlas" from Oculum-Verlag, and planetarium programs for the PC, like the program "Stellarium", where the three rings of the TELRAD are already drawn or can be displayed around the interesting celestial objects. This makes finding these celestial objects a real walk.FEATURESTELRAD projection finderIlluminated rings of 4 degrees, 2° and 0.5° in the skySee the complete starry sky without magnificationEasy installation and useCan be installed on nearly every telescopesBase with quick release coupling included Powered by two AA batteries (not included) Very long battery life because of LED technologySCOPE OF DELIVERYTELRAD viewfinder with projector and battery compartment TELRAD base with quick-release coupling for the viewfinder Adhesive tape for attachment to telescope

Top viewfinder telescope with upright field, illumination, 90° view and pole viewfinder engraving - image sharpness and viewing behavior raise this viewfinder significantly above the level of the usual 8x50 viewfinder telescopes. The upright image field facilitates orientation. Multi-Coating on all surfaces. This polar finder is mainly intended for the observer with a transportable telescope. The 90° view facilitates operation, and with the help of the pole scale and the lighting, a telescope can be quickly and safely aligned to the celestial pole. The upright field of view makes the handling together with the high image sharpness a pleasant experience. The lighting is powered by two LR41 button cells.

Explore Scientific 82° Series™ extreme wide field eyepieces are optimized to produce high contrast, high resolution, and superior flat field characteristics. The visual effect of these eyepieces with their long eye-relief and their 82° apparent field is truly a full-immersion experience. Your eye is relaxed, allowing you to easily use the "averted vision" technique to study faint details across a huge field-of-view. The 82° Series eyepieces come with a twist-up rubber eye-guard that raise to the desired height for the comfort of the observer, and as experienced astronomers know, eye comfort is critical when trying to observe at the visual limits of the telescope. To keep internal reflections to a minimum, all internal surfaces of the eyepiece barrel are flat black, as well as the edges of the lenses themselves to minimize the scattering of light within the lenses themselves. All 82° Series eyepieces are fully multi-coated and edge-blackened to produce maximum contrast.

Massive fork mount with excellent and adjustable mechanics for large binoculars with tripodWhen using giant binoculars, a stable mount and tripod with an appropriate load capacity is absolutely necessary. The new EXPLORE SCIENTIFIC U-mount with field tripod has been specially designed for the EXPLORE SCIENTIFIC BT series of giant binoculars, but also fits most other binoculars from 70 to 120mm lens diameter, which have a 1/4 inch photo thread connection on the underside. With the U-mount there is no shaking or annoying vibrations, the combination is as solid as a piece of iron and provides unlimited observation pleasure in all binocular adjustment positions. Whether you are observing the starry sky or the landscape, the U-mount is a solid base for your giant binocular and allows soft and smooth movements in both axes.The U-mount as a base for giant binoculars and always with you on every excursionAn easily transportable but solid mount is essential when using giant binoculars. A simple photo tripod with ball head or video tilt head is quickly overloaded here. The new EXPLORE SCIENTIFIC U-mount has an excellent mechanism with adjustable friction in both axes, and allows easy adjustment and tracking even when the load is fully utilised. Depending on the adjusted intensity of the friction, the binocular position is kept stable or a soft and smooth movement can be achieved. The large adjustment screws on both axes are smooth and easy to operate even with gloves and clammy fingers. Vibrations are reduced to an absolute minimum by the solid construction of the U-mount. Even at high magnification, there are no shakes and the finest details can be observed. The U-mount and tripod can be separated for easy transport.Mounting the large binoculars on the U-mountThe binoculars can be mounted and removed in a few seconds using the quick-release adapter plate included in the scope of delivery. This is a major advantage, especially for mobile outdoor use. The connection between binoculars and adapter plate is made by two 1/4 inch threaded bolts (standard photo tripod thread), which are variably guided in a slotted hole. A universal use with different binoculars is thus possible. The double screw connection guarantees a very secure fit of the binoculars. The adapter plate itself is also attached to the U-mount with the help of two large clamping screws, which are easy to use even when wearing gloves. Nothing wobbles here and all controls are easy to use.The field tripod provides a secure standNo matter what the surface, the EXPLORE SCIENTIFIC field tripod provides a safe stand. The solid aluminium and stainless steel construction effectively suppresses any kind of vibration. The large 50mm diameter stainless steel tripod legs and the aluminium tripod head plate are an ideal combination and offer maximum stability with a moderate transport weight of only 5.8kg. With applied and retracted tripod legs, the transport dimension is only 80cm long. The included accessory tray additionally gives some tension outwards to the tripod legs and thus to increase the stability. By pulling out the tripod legs, the working height for the binoculars can be individually adjusted within a range of approx. 100 to 140cm. FEATURESSolid fork mount with tripod for giant binocularsComfortable observation position in all orientationsExcellent mechanism for adjustment and tracking of the binocularSmooth and even movement of the binocularStepless friction adjustment in both axesLarge hand wheels for adjustment - no problem even with glovesSecure holding of the binocular in all adjustment positionsIdeal vibration damping thanks to the sturdy stainless steel tripodIntegrated accessory tray made of aluminiumCarries binoculars up to 12kg absolutely safelyAdjustment range vertical axis: 0 to 90 degrees Adjustment range azimuth axis: 360 degrees (without limitation)Maximum possible width of the binoculars: 290mmQuick change adapter plate with 2 x 1/4 inch photo thread screwsDouble prismatic clamping of the quick-change adapter plateSetting height of tripod with mounting: approx. 100 to 140 cmTripod leg tube diameter: 50 mmTransportation size tripod: ca. 80 cm lengthWeight mounting/tripod: 5.5 / 5.8kgMaterial mounting/tripod: aluminium / stainless steelShipping size/weight mount: 51x42x28cm, 7.6kgShipping dimensions/weight tripod: 87x21x22cm, 6.5kgSCOPE OF DELIVERYU-Mount with field tripodQuick change adapter plateAccessories trayInstruction manual

Explore Scientific 8x50 illuminated finder scopes (available in straight-thru and right angle versions) produce images that are right-side-up and left-to-right corrected views, which makes it easier to find objects in the sky. The Explore 8 X 50 Straight-Thru Erect Image Illuminated Finder Scope, with its scale markings and open Center, not only helps you center objects precisely, but gives a reference of the exact field of view in Degrees. The deep red Illumination can be adjusted to just the right brightness. The eyepiece has comfortable eye relief and produces a 6,97 degrees field of view. Both the eyepiece and the main objective can be focused independently so that you can obtain perfect focus for your eyes. The straight-thru finderscope weights just under a pound (450gr), and measures 216mm" x 63mm" x 58mm". FEATURES High quality 8x50 upright viewfinder With adjustable crosshair lighting with scale markings Perfect image sharpness and good viewing behaviour Large field of view FOV of 6.96 degrees Focusing of lens and crosshair separately possible.  Multi-coated lens surfaces. Power supply by 2 pcs coin battery type LR41.FEATURESHigh quality 8x50 upright viewfinderWith adjustable crosshair illumination and with scale markingsPerfect image sharpness and good viewing behaviourLarge field of view FOV of 6.96 degreesFocusing of lens and crosshair separately possibleMulti-coated lens surfacesSCOPE OF DELIVERYFinder scopeFinder bracket

​The EXPLORE SCIENTIFIC Hybrid Finder Scope Base is designed to accept all legacy EXPLORE SCIENTIFIC and BRESSER Messier finder scope brackets and mini dovetail-type (e.g. Vixen, Synta, and many other brands) finder scope brackets. The base has rugged all-metal parts with black-anodized base and chrome-plated metal screws. Safety stops prevent the finder scope from sliding through and from falling when attaching screws are loosened. There are threaded holes on the left and right sides of the EXPLORE SCIENTIFIC Hybrid Finder Scope Base for desired access to attaching screws. Includes bolts and screws for mounting the base to the optical tube assembly. Direct replacement for all EXPLORE SCIENTIFIC and BRESSER Messier telescopes, allowing the use of a wide range of other-brand finder scope options.FEATURESDirect replacement for all EXPLORE SCIENTIFIC and BRESSER Messier telescopesAccepts all legacy EXPLORE SCIENTIFIC and BRESSER Messier finder scope bracketsAccepts also mini dovetail-type fittings from e.g. Vixen, Synta and many other manufacturersRugged all-metal parts with black-anodized baseIntegrated safety stopsIncludes bolts and screws for mounting the baseBolt hole spacing 32.5mm for mounting on telescope tubeSuitable for screw diameter M4/M5 SCOPE OF DELIEVERYHybrid Finder Scope BaseBolts and screws for mounting