Skip to main content Skip to search Skip to main navigation

EXPLORE SCIENTIFIC Two-Room Pop-UP Observatory Tent / Weather protection for telescopes (Refurbished)

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Skip product gallery

Customers also viewed

%
EXPLORE SCIENTIFIC Two-Room Pop-UP Observatory Tent / Weather protection for telescopes
The Explore Scientific Two Room Pop-Up Observatory is a useful weatherproof tent that protects your valuable equipment from wind, dew, rain and dust. Most amateur astronomers and astrophotographers dream of having an observatory to keep dust, dew and wind away from their telescope and to shield disturbing stray light from their telescope's optics. But for many astronomers, an observatory is only a dream because of the cost of a roll-roof building or an observatory dome. There is also the problem that an observatory building needs a permanent location that is suitable for an observatory. Portable, quick to set up and inexpensive A good solution is a portable observatory tent. Compared to their fixed counterparts, a tent is extremely inexpensive and can be set up almost anywhere there is a flat surface and a clear view of the sky. However, setting up a portable observatory tent can also be a hassle. No one wants to waste their valuable observing time reading complex instructions while trying to figure out which pole goes where. For this reason, we have used a sturdy pop-up design. Setting up the EXPLORE SCIENTIFIC Pop-Up Observatory can be done in a matter of minutes. By releasing a retaining strap, the complete tent unfolds from its packaging in just a few seconds. You really don't need to do anything other than connect the two observatory rooms with a Velcro seam and attach it to the ground. Thanks to this simple design, the EXPLORE SCIENTIFIC Pop-Up Observatory can be set up and taken down in just a few minutes, giving you plenty of time to enjoy your astronomy weekend. Plenty of space for your equipment and super compact when folded up. With just under 5 square metres of total space and 1.52 metre high side walls, coupled with 1.83 metre high windscreens, the EXPLORE SCIENTIFIC Pop-Up Observatory allows you to set up your computer equipment in one room and the telescope in the other, or set up two complete telescope systems. Each room is 152 by 152 centimetres. Mobile observatory with compact transport dimensions In addition to being easy to set up and take down, another advantage of the pop-up design is that it is travel-friendly, as it is light and easy to stow away. The entire observatory tent folds down to a package 70 centimetres in diameter and 10 centimetres thick. This allows it to be transported in a small car or even on a flight for distant expeditions. And apart from the fact that it allows you to go to your favourite observing site at any time, portable observatory tents are usually the first choice for astronomers and astrophotographers attending star party events.  Advanced materials provide optimal protection and durability However, the fact that the EXPLORE SCIENTIFIC Pop-Up Observatory is lightweight and easy to store and set up doesn't mean it can't withstand bad weather conditions. The Black-Out coated polyamide material is waterproof and offers excellent UV protection. This guarantees reliable protection for your equipment as well as long-lasting durability of the observatory tent. Large doors for convenient use The doors to enter the observatory tent and pass through the attached rooms are very generously sized at 102 centimetres high and 92 centimetres wide, so you can easily walk in and through your equipment. The doors roll down to keep moisture out and their heavy-duty zips will last for years. The extra weather cover protects your gear when not in use. With the large weather cover included, you can protect your gear from the hot sun or a surprise rain shower during the day. Or even from dew at night. The modern, coated and waterproof material keeps all unwanted weather influences away from your equipment. Included are cords and pegs to tie down the tent. The structure also has additional holding straps for the use of heavy-duty straps, which can be purchased at local hardware stores. PRODUCT VIDEO:  https://youtu.be/1rL5PzPa-dQ FEATURESPractical weather protection for telescopes Protects your equipment from wind, dew, rain and dust Mobile observatory: portable, quickly assembled, reasonably priced Compact transport size also suitable for air travel 5 square metres of space for your equipment and sufficient freedom of movement Interior dimensions: 152 x 304cm Side wall height 152cm / windbreak wall height 183cm Large 102 x 92cm doors for ease of use Additional weather protection cover included Advanced materials provide optimum protection and durability Cords and pegs included to tie down the tent Additional tie downs for heavy duty straps included Transport dimensions and weight: diameter 70cm, height 10cm, 3kg Colour tent material: black SCOPE OF DELIVERY Two-room pop-up observatory tent Weather protection cover Set of cords and pegs

Available

€198.00* €269.00* (26.39% saved)
BRESSER Pollux-II 150/1400 EQ3 Reflector Telescope with Smartphone Adapter & Solar Filter
Explore the beauties of the night sky with this complete telescope set. Everything is included so that you can get started immediately with the fascinating hobby of astronomy: the astronomical reflector telescope with 150 mm aperture and 1,400 mm focal length, the equatorial mount, the tripod and extensive accessories for exciting observations. Especially important for beginners: the system is very easy to use. Particularly the Moon, the planets and the Sun appear impressive through the Pollux-II. Powerful performance for your first celestial observations – the telescope Take your first steps in astronomy with this classic reflector telescope of the "Newton" type. Because it is equipped with an additional lens inside the focuser, it belongs to the group of the so-called "catadioptric" optics. One advantage of this combination of lens and mirror: despite the large focal length, the telescope tube is relatively short and therefore easily transportable. In addition, you can look forward to a comfortable observation position at all times. This is because with telescopes of this design you do not look in at the back of the telescope, but at the front and laterally. So you don't have to bend down, even if the reflector telescope is pointed vertically upwards at the sky. The large aperture of 150 mm collects a lot of light from the celestial objects. In addition, 150 mm aperture and 1,400 mm focal length result in a focal ratio (ratio of aperture to focal length) of 1 to 9.3 (F/9.3). This allows you to enjoy viewing your favourite objects at high magnifications with good contrast. Admire especially the planets or details on the Moon through the entry-level telescope. But also some deep sky objects are very nice to observe: open star clusters, globular clusters and bright planetary nebulae such as the Ring Nebula M57 in the constellation Lyra can be seen beautifully through this astronomical telescope. But how close can you get to the celestial eye-catchers? The 150 mm aperture achieves a resolving power that allows magnifications of up to 300x with sharp images. The technical possibilities go far beyond this – theoretically up to 1,050x using the included accessories. However, as the magnification increases, the sharpness of the image can slowly decrease. In addition, high magnification also requires the right environmental conditions. For no matter through which telescope you look, the air turbulence in the atmosphere (seeing conditions) always influences your observation and magnification possibilities. Note for nature lovers: If you choose a Newtonian telescope like the Pollux-II reflector telescope, you can look forward to a specialist in astronomical observation. However, the image is always displayed laterally reversed as well as upside down, which makes no difference when observing the sky. However, this type of telescope is less suitable for nature and landscape observation during the day. Would you like to use your new telescope for exciting nature discoveries as well? Then we recommend that you choose one of the BRESSER refractor telescopes. Solid base for gazing skywards – mount and tripod Have you found the perfect location for your journey of discovery into the night sky? Then simply mount your astronomical telescope with the equatorial mount on the height-adjustable aluminium tripod. The special feature of this type of mount: after the so-called "alignment", the positioning of an axis parallel to the Earth's axis, the movement of the celestial bodies only has to be compensated for on this one axis. To do this, you simply point the axis approximately at Polaris. This is a huge advantage over the azimuthal mount, where both axes are moved simultaneously. In addition, the two flexible shafts with fine adjustment make adjusting and tracking the telescope very precise and comfortable. And to ensure that accessories are always at hand, they can be stored on the handy shelf between the tripod legs.Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable! Everything you need, night and day – the accessories The astronomical telescope comes with a wide range of equipment so that you can start admiring the Moon, planets or the Sun straight away. At night, the LED viewfinder helps you keep an overview of the sky. Once installed parallel on the tube and correctly aligned, the small red dot shows you where the telescope is pointing when you look through it. This way, you can align the optics precisely and find celestial bodies more quickly before you then take a closer look with the high magnification. Varying views of the universe: the two eyepieces allow you to marvel at your observation objects in different magnifications. They are simply inserted into the telescope's focuser using their sockets with a standardised 1.25 inch (31.7 mm) diameter. You want to see even more details? Then go for the 3x barlow lens, which triples the magnification of the eyepieces. If you would like to make astronomical discoveries even during the day, use the solar filter to observe the star of our own solar system. It allows you to easily and safely observe sunspots and granulation on the sun. CAUTION: Never point the telescope at the sun without the solar filter! Capture special highlights easily – with the smartphone adapter, you use your smartphone as a camera for your telescope. This way you can quickly take your first photos of the Moon or the Sun, for example, and get started in astrophotography. FEATURES Reflector telescope with 150 mm aperture and 1,400 mm focal length Reflector type catadioptric Well suited for observing the Sun, Moon and planets Height-adjustable tripod with equatorial EQ3 mount Precise adjustment through flexible shafts and fine adjustment in both axes Easy to use, very suitable for beginners Focal ratio F/9.3, therefore good for observing the planets and details on the moon 1.25 inch (31.7 mm) eyepiece focuser Two eyepieces and one barlow lens with 1.25 inch (31.7 mm) extension tubes for different magnifications Safe solar observation with the included solar filter Entry into astrophotography with smartphone camera adapter SCOPE OF DELIVERY Telescope Aluminium tripod Equatorial EQ3 mount Eyepieces: 4 mm and 20 mm (1.25 inch sockets) Barlow lens 3x (1.25 inch socket) LED illuminated dot finder Solar filter Smartphone camera adapter Accessory tray Astronomy software download Instruction manual

Available

€369.00*