LUNT Adapter-Plate LS100FHa to 121 - 140mm Ø

Adapter plate for mounting a LUNT LS50FHa or LS60FHa front-filter at a telescope with 201mm to 225mm front outer diameter.With this adapter you can mount a LS50FHa or LS60FHa at your existing astronomical telescope with 201mm to 225mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557417 gives only the price for a complete range of different adapter-plates of 201mm to 225mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. Excellent image quality due to 2-lens ED optics with 70mm aperture for night sky observation, and 60mm usable aperture for H-alpha solar observation.With innovative air pressure tuning system, high-quality 2 inch (50.8mm) Rack&Pinion (R&P) focuser, and B600 blocking filter.Solar observing in H-alpha:The LS60MT/B600 is a complete telescope for observing the sun in H-alpha light, with 60mm free aperture (no central obstruction) and 420mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a solid 2 inch Rack&Pinion focuser with 10:1 reduction.Blocking-filter is the B600. The B600 is good for visual solar observing. Also solar imaging is possible by cameras with small CCD chip. We recommend a LS60MT with B1200 blocking-filter by using cameras with middle or large sized CCD chips.The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepieces and with a T2 camera connection.Observing the starry night sky:The H-alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. The 2-lens ED refractor can then be used as a normal telescope with 70mm aperture and 420mm focal length for observation and photography of the night sky. The ED Doublet lens will offer an excellent image. It can be used with a standard 2 inch zenith mirror or other accessories at the R&P focuser, the back focus is 135mm.With an additional Amici prism, the telescope can of course also be used during the day for nature and landscape observations.This makes the LS60MT, with its small dimensions and low weight, also an ideal travel telescope for all applications!More applications:With additionally available accessories the LS60MT offers even more possibilities!- Double-StackThe LS60MT telescope can optionally be upgraded with the additionally available double-stack filters LS50FHa or LS60FHa (part numbers 0550200 and 0550250). These filters will be simply screwed on the front of the LS60MT, no additional adapters are necessary. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.- Solar observing in White-LightIf the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS60MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.This makes the LS60MT a completely universal usable telescope!FEATURES2-lens ED refractor, FPL-51Aperture: 70mmUsable aperture in H-alpha: 60mm (no central obstruction)Focal length: 420mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerBlocking filter: B600 with 1.25 inch and T2 connectionFocuser: Rack&Pinion focuser with 10:1 reductionTube-ring with 1/4-20 tapped base (standard thread for photo-tripods)Weight with H-alpha unit: 3.8kgWeight without H-alpha unit: 2.6kgLength with H-alpha unit and blocking filter: 40cmLength without H-alpha unit: 31cmSCOPE OF DELIVERYLS60MT Multipurpose TelescopePressure-TunerB600 blocking filter in star-diagonal housing2 inch Rack&Pinion focuserTube ring with 1/4-20 connection for mounting on photo-tripodsTransport case (53x33x17cm)Instruction manual

Adapter plate for mounting a LUNT LS50FHa or LS60FHa front-filter at a telescope with 81mm to 100mm front outer diameter.With this adapter you can mount a LS50FHa or LS60FHa at your existing astronomical telescope with 81mm to 100mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557411 gives only the price for a complete range of different adapter-plates of 81mm to 100mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

Adapter plate for mounting a LUNT LS50FHa or LS60FHa front-filter at a telescope with 141mm to 160mm front outer diameter.With this adapter you can mount a LS50FHa or LS60FHa at your existing astronomical telescope with 141mm to 160mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557414 gives only the price for a complete range of different adapter-plates of 141mm to 160mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

This dovetail plate with 300mm length is suitable for Lunt Solar Systems LS50THa, LS60THa, LS60MT, and LS80THa telescopes.The width of the dovetail is conform to the GP-level standard. Therefore it could be used at the BRESSER EXOS 1+2 mounts for example, but also at many other mounts. The telescope connecting screws are 1/4-20 inch size and they do not look out of the rail, which makes this rail a perfect match for many astronomical mounts. The distance between the screws is matched for the Lunt Solar Systems telescopes LS50THa, LS60THa, LS60MT, and LS80THa.Technical data:• Length: 300mm• Width: 44mm• Distance between screws: 35mm• Screws thread: 1/4"-20Delivered by order:• 1 x 300mm dovetail plate• 2 x 1/4"-20 screws

Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with 201mm to 225mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with 201mm to 225mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557447 gives only the price for a complete range of different adapter-plates of 201mm to 225mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with 161mm to 180mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with 161mm to 180mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557445 gives only the price for a complete range of different adapter-plates of 161mm to 180mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks