LUNT Ca-K filter-module for LS130MT

The LS130MT/B3400 telescopes can be upgraded with this optional Ca-K module and conversion kit. This allows to explore the Sun at different wavelengths with one and the same telescope, and the telescope can also be used for observing and photographing the starry night sky.You can replace the H-Alpha system of the LS130MT/B3400 telescope with this conversion kit with Ca-K module in just a few easy steps. This makes it possible to observe the Sun in H-alpha or in the light of the Calcium-K wavelength - with one and the same telescope!This Ca-K module was specially designed for the LS130MT/B3400 H-Alpha telescope. It is delivered as a set together with the conversion kit with a completely new focuser. Simply loosen three knurled screws at the LS130MT/B3400, which hold the H-Alpha unit together with the focuser. Here the new focuser will be fixed with the Ca-K module, and you have already made your LS130MT a adequate Ca-K telescope. But that's not all: With the new focuser, without the Ca-K module, the LS130MT/B3400 can also be used as a 3-lens apochromatic telescope for astronomical observations and photography at night!Or you can observe the Sun in White-Light together with a LUNT Herschel wedge!This conversion kit turns the LS130MT into a real all-round telescope!This conversion kit can also be used at the LS130MT/B1200 and LS130MT/B1800 telescopes, but it is not necessary there. This conversion kit is only necessary at the LS130MT/B3400, because at this telescope the blocking filter is fix installed inside the focuser.SCOPE OF DELIVERY2" Ca-K Module for LS130MT telescope2" focuser with 10:1 reduction and adapter to LS130MT telescopeInstruction manualLS130MT telescope not included! Can only be used together with an LS130MT solar telescope.

​Double-stack module for more contrast and details on the solar surface at LS130MT telescopes.At the LS130MT H-alpha solar telescopes double-stacking is possible with these internal DSII double-stack modules. The DSII modules reduce the bandwidth to <0.5 Angstroms. The DSII modules are designed to show the surface details of the Sun better, the contrast is significantly increased and thus filaments, active regions and other surface details are much more visible.Like the LS130MT telescope, the DSII Double-Stack module is tuned via the innovative Pressure-Tuner system, and the sensitive Etalon is well protected inside the telescope.The LS130MT/DSII module is designed exclusively for use in the LS130MT telescope, it cannot be used at other telescopes.FEATURESBandwidth: <0.5 AngstromTuning: air-pressure tuning system Weight: 2.3kgSCOPE OF DELIVERYDSII module with internal Etalon for LS130MT telescopesPressure Tuner system(LS130MT telescope not included!)

NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.The MESSIER MC-152 excells due to its compact optics. The long focal length of this telescope facilitates relaxed observations with high magnifications - the compact size makes it the perfect mobile telescope. 152mm aperture enable you to observe bright nebulas in the depth of space. Find the remnants of a gigantic stellar explosion in the year 1054 in the constallation Taurus or scan the glowing bands of the Great Orion Nebula. Detect the famous Whirlpool Galaxy in the Big Dipper or find the Dumpbell-Nebula in the constellation Vulpecula. This telescope is only an optical tube without mount and tripod.FEATURESTelescope for night and solar observationHigh quality BRESSER Maksutov opticsIdeal for planets, double stars and planetary nebulaeExcellent focuser with 65mm open diameteroptimized finder socket for comfortable use Cradle rings with handle and integrated piggyback camera holder (1/4 thread) Smartphone camera adapter for sky navigation includedUniversal 44mm Dovetail plate with stainless steel rail (fits LXD75/Great Polaris/EQ5)T2 thread for DSLR cameras (T2-adapter ring for your camera is needed) 50,8mm (2") to 31,7mm (1,25") adapter with integrated T2 thread (T2-adapter ring for your camera is needed) SCOPE OF DELIVERYoptical tubeaperture solar-filter26mm Super Plössl eyepiece (31.7mm / 1.25")integrated 31.7 mm and T2 adapteradapter for 50.8 mm (2")mounting ring (for EXOS and similar mounts)handle with camera holderSmartphone adapter for celestial navigation6x30 Viewfinder90° star diagonal 31,7mm (1,25")astronomy PC software Stellariumrotatable star map

The optics of the VMC260L are significantly better than the traditional Schmidt-Cassegrain telescope. Despite its high 3000 mm focal length, it is just 650 mm long. Featuring a large 260 mm aperture, the telescope collects large amounts of light for serious professional observations and photography of the planets and countless deep-sky objects. Thanks to the dielectric mirrors, the VMV260L guarantees razor-sharp images and maximum brightness. The open lens barrels cool the telescope quicker than conventional closed Cassegrain systems. The telescope can be used with an optional 0.62x focal reducer to reduce the aperture ratio to 1:7.1. This shortens the exposure times and allows you to photograph large objects. The telescope comes with a standard dovetail bar and a carry handle that doubles up as a camera holder for night sky photography. The Finder Scope and the Vixen Flip Mirror is not included in this version ! FEATURES Very short cool-down time thanks to open lens barrel Optimised system for photography Very transportable – only 650 mm long Lightweight design – only 12.1 kg Large 260 mm aperture Built-in correction lens in front of the secondary mirror Backfocus without Reducer: 149,4 mmBackfocus with Reducer: 63,5 mmTotal weight: 12.1 kg WHAT’S INCLUDED VMC 260 telescope/lens barrel Carry handle VIXEN standard dovetail barFinder Bracket ShoeEA60 mm to 50.8 mm SX

​Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 2-lens ED Apo telescope with FPL-53 glass, 80mm aperture and 560mm focal length - very good image quality for H-Alpha solar observation and also for observing the starry sky at night.With innovative air pressure tuning system and good 2 inch (50.8mm) R&P focuser. Delivered without blocking filter, use for H-Alpha sun observation only possible with additional blocking filter!This telescope is supplied without blocking filter. We offer a wide range of additionally available blocking filters in different sizes, either mounted in a 90° star-diagonal housing or in a straight extension tube. These are all usable with this telescope.ATTENTION: Without such an additional blocking filter you cannot use this telescope for H-alpha solar observation!Solar observing in H-alpha:The LS80MT is a telescope for observing the sun in H-alpha light, with 80mm free aperture (no central obstruction) and 560mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance.Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction.This version of the LS80MT is delivered without blocking filter. Therefore an additional blocking filter is required to use the telescope for solar observation in the H-alpha wavelength. You can choose from the wide range of Lunt Solar Systems blocking filters and decide for example if you want a blocking filter in a 90° star-diagonal housing or one in a straight extension tube.Observing the starry night sky:The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551330) the 2-lens ED Apo refractor can then be used as a normal telescope with 80mm aperture and 560mm focal length for observation and photography of the night sky. The FPL-53 doublet lens offers an low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551330.Please note that the optionally available conversion kit 0551330 is absolutely necessary if the telescope should be used at night.More applications:With additionally available accessories the LS80MT offers even more possibilities!- Double-StackThe LS80MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible.- Solar observing in White-LightIf the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light.- Solar observing in Ca-K wavelengthCertainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS80MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun.This makes the LS80MT a completely universal usable ED Apo telescope of very good quality!FEATURES2-lens ED APO refractor, FPL-53Aperture: 80mm (no central obstruction)Focal length: 560mmBandwidth: internal Etalon with <0.7 AngstromTuning: air pressure tuning system Pressure-TunerSupplied without blocking filter, additionally available blocking filter absolutely necessary!Focuser: R&P with 10:1 reductionTwo tube-ring with handleSol-Searcher installed inside handleDovetail bar at GP-level for astronomical mountsWeight: 4.95kgLength with blocking filter and dew-shield: 62cmLength without blocking filter and removed dew-shield: 50cmSCOPE OF DELIVERYLS80MT Multipurpose TelescopePressure-Tuner2 inch R&P focuser with 10:1 reductionTube rings with dovetail bar and sol-searcherTransport case (78x33x23cm)Instruction manualConversion kit for observation of the starry night sky (0551330) not included!

Explore the beauties of the night sky with this complete telescope set. Everything is included so that you can get started immediately with the fascinating hobby of astronomy: the astronomical reflector telescope with 150 mm aperture and 1,400 mm focal length, the equatorial mount, the tripod and extensive accessories for exciting observations. Especially important for beginners: the system is very easy to use. Particularly the Moon, the planets and the Sun appear impressive through the Pollux-II. Powerful performance for your first celestial observations – the telescope Take your first steps in astronomy with this classic reflector telescope of the "Newton" type. Because it is equipped with an additional lens inside the focuser, it belongs to the group of the so-called "catadioptric" optics. One advantage of this combination of lens and mirror: despite the large focal length, the telescope tube is relatively short and therefore easily transportable. In addition, you can look forward to a comfortable observation position at all times. This is because with telescopes of this design you do not look in at the back of the telescope, but at the front and laterally. So you don't have to bend down, even if the reflector telescope is pointed vertically upwards at the sky. The large aperture of 150 mm collects a lot of light from the celestial objects. In addition, 150 mm aperture and 1,400 mm focal length result in a focal ratio (ratio of aperture to focal length) of 1 to 9.3 (F/9.3). This allows you to enjoy viewing your favourite objects at high magnifications with good contrast. Admire especially the planets or details on the Moon through the entry-level telescope. But also some deep sky objects are very nice to observe: open star clusters, globular clusters and bright planetary nebulae such as the Ring Nebula M57 in the constellation Lyra can be seen beautifully through this astronomical telescope. But how close can you get to the celestial eye-catchers? The 150 mm aperture achieves a resolving power that allows magnifications of up to 300x with sharp images. The technical possibilities go far beyond this – theoretically up to 1,050x using the included accessories. However, as the magnification increases, the sharpness of the image can slowly decrease. In addition, high magnification also requires the right environmental conditions. For no matter through which telescope you look, the air turbulence in the atmosphere (seeing conditions) always influences your observation and magnification possibilities. Note for nature lovers: If you choose a Newtonian telescope like the Pollux-II reflector telescope, you can look forward to a specialist in astronomical observation. However, the image is always displayed laterally reversed as well as upside down, which makes no difference when observing the sky. However, this type of telescope is less suitable for nature and landscape observation during the day. Would you like to use your new telescope for exciting nature discoveries as well? Then we recommend that you choose one of the BRESSER refractor telescopes. Solid base for gazing skywards – mount and tripod Have you found the perfect location for your journey of discovery into the night sky? Then simply mount your astronomical telescope with the equatorial mount on the height-adjustable aluminium tripod. The special feature of this type of mount: after the so-called "alignment", the positioning of an axis parallel to the Earth's axis, the movement of the celestial bodies only has to be compensated for on this one axis. To do this, you simply point the axis approximately at Polaris. This is a huge advantage over the azimuthal mount, where both axes are moved simultaneously. In addition, the two flexible shafts with fine adjustment make adjusting and tracking the telescope very precise and comfortable. And to ensure that accessories are always at hand, they can be stored on the handy shelf between the tripod legs.Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable! Everything you need, night and day – the accessories The astronomical telescope comes with a wide range of equipment so that you can start admiring the Moon, planets or the Sun straight away. At night, the LED viewfinder helps you keep an overview of the sky. Once installed parallel on the tube and correctly aligned, the small red dot shows you where the telescope is pointing when you look through it. This way, you can align the optics precisely and find celestial bodies more quickly before you then take a closer look with the high magnification. Varying views of the universe: the two eyepieces allow you to marvel at your observation objects in different magnifications. They are simply inserted into the telescope's focuser using their sockets with a standardised 1.25 inch (31.7 mm) diameter. You want to see even more details? Then go for the 3x barlow lens, which triples the magnification of the eyepieces. If you would like to make astronomical discoveries even during the day, use the solar filter to observe the star of our own solar system. It allows you to easily and safely observe sunspots and granulation on the sun. CAUTION: Never point the telescope at the sun without the solar filter! Capture special highlights easily – with the smartphone adapter, you use your smartphone as a camera for your telescope. This way you can quickly take your first photos of the Moon or the Sun, for example, and get started in astrophotography. FEATURES Reflector telescope with 150 mm aperture and 1,400 mm focal length Reflector type catadioptric Well suited for observing the Sun, Moon and planets Height-adjustable tripod with equatorial EQ3 mount Precise adjustment through flexible shafts and fine adjustment in both axes Easy to use, very suitable for beginners Focal ratio F/9.3, therefore good for observing the planets and details on the moon 1.25 inch (31.7 mm) eyepiece focuser Two eyepieces and one barlow lens with 1.25 inch (31.7 mm) extension tubes for different magnifications Safe solar observation with the included solar filter Entry into astrophotography with smartphone camera adapter SCOPE OF DELIVERY Telescope Aluminium tripod Equatorial EQ3 mount Eyepieces: 4 mm and 20 mm (1.25 inch sockets) Barlow lens 3x (1.25 inch socket) LED illuminated dot finder Solar filter Smartphone camera adapter Accessory tray Astronomy software download Instruction manual