LUNT LS100FHa H-alpha double-stack solar filter

Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with 141mm to 160mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with 141mm to 160mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557444 gives only the price for a complete range of different adapter-plates of 141mm to 160mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

100mm H-alpha solar filter system with B3400 blocking filter, for front mounting at telescopes with 2" focuser, and up to 3060mm focal length.The LS100FHa H-alpha Etalon filter system with 100mm aperture for use on any refractor and many other telescopes. Because the LS100FHa has an estimated bandwidth of <0.7 Angstrom it is capable to providing high contrast views of both solar surface and edge detail (prominences).The system includes the B3400 blocking filter, which is usable for telescopes up to 3060mm focal length. The blocking filter is installed in a straight extension tube for 2" focuser. This extension tube is equipped with a reception for 2" eyepieces and a adapter for 1.25" eyepieces.Adding an additional available double-stack Etalon system will reduce the bandwidth to ~<0.5 Angstrom.FEATURESAperture: 100 mmBandwidth: <0.7 AngstromTuning: tiltable EtalonHousing diameter: 162 mmLength: 101 mmWeight: 2.75 kgFront thread: M120x1.5 female threadRear thread: M120x1.5 male threadBlocking filter: B3400 in extension tube for 2" focuserMaximum focal length of telescope: 3060 mmSCOPE OF DELIVERYLS100FHa solar filterB3400 Blocking Filter (for 2" focuser) in extension tubeTransport caseInstruction manual

Adapter plate for mounting a LUNT LS100FHa front-filter at a telescope with 121mm to 140mm front outer diameter.With this adapter you can mount a LS100FHa at your existing astronomical telescope with 121mm to 140mm outer diameter, in order to use this telescope for solar observing in H-alpha. The adapter is plugged onto the front of your telescope, and the filter can be screwed onto the adapter.PLEASE NOTE:This article no. 0557443 gives only the price for a complete range of different adapter-plates of 121mm to 140mm diameter. The real adapter-plate will be manufactured exactly for your telescope. Therefore we need the exact outside diameter of your telescope or the dew shield!When ordering, you will find a field for comments, please note there the appropriate diameter!Then we will manufacture a adapter-plate for the diameter that you have noted. Manufacturing time will be 2 to 3 weeks.If you have any questions, you can contact us by e-mail or telephone.SCOPE OF DELIVERY1x adapter plate manufactured by your specifications(Filter not included)Delivery time 2-3 weeks

​​Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 3-lens apochromatic telescope with FPL-53 glass, 100mm aperture and 714mm focal length - excellent image quality for H-Alpha solar observation and also for observing the starry sky at night. With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B1800 blocking filter. Solar observing in H-alpha: The LS100MT/B1800 is a complete telescope for observing the sun in H-alpha light, with 100mm free aperture (no central obstruction) and 714mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance. Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction. Blocking-filter is the B1800. The B1800 is very good for visual solar observing. Also solar imaging is possible by cameras with small to large sensor chip. We recommend a LS100MT with B3400 blocking-filter by using cameras with very large sensor chips. The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepieces and with a T2 camera connection. Observing the starry night sky: The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551430) the 3-lens apochromatic refractor can then be used as a normal telescope with 100mm aperture and 714mm focal length for observation and photography of the night sky. The FPL-53 triplet lens offers an outstandingly low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551430. Please note that the optionally available conversion kit 0551430 is absolutely necessary if the telescope should be used at night. More applications: With additionally available accessories the LS100MT offers even more possibilities! - Double-Stack The LS100MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible. - Solar observing in White-Light If the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light. - Solar observing in Ca-K wavelength Certainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS100MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun. This makes the LS100MT a completely universal usable apochromatic telescope of highest quality! FEATURES 3-lens APO refractor, FPL-53 Aperture: 100mm (no central obstruction) Focal length: 714mm Bandwidth: internal Etalon with <0.7 Angstrom Tuning: air pressure tuning system Pressure-Tuner Blocking filter: B1800 with 1.25" and T2 connection Focuser: R&P with 10:1 reduction Two tube-ring with handle Sol-Searcher installed inside handle Dovetail bar at GP-level for astronomical mounts Weight: 6.8kg Length with blocking filter and dew-shield: 84cm Length without blocking filter and removed dew-shield: 65cm SCOPE OF DELIVERY LS100MT Multipurpose Telescope Pressure-Tuner B1800 blocking filter in star-diagonal housing 2 inch R&P focuser with 10:1 reduction Tube rings with dovetail bar Transport case (78x33x23cm) Instruction manual Conversion kit for observation of the starry night sky (0551430) not included!

Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 3-lens apochromatic telescope with FPL-53 glass, 100 mm aperture and 714 mm focal length - excellent image quality for H-Alpha solar observation and also for observing the starry sky at night. With innovative air pressure tuning system, good 2 inch (50.8 mm) R&P focuser, and B3400 blocking filter. Solar observation in H-alpha: The LS100MT/B3400 is a complete telescope for observing the sun in H-alpha light, with 100 mm free aperture (no central obstruction) and 714 mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance. Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction. Blocking filter is the B3400. The B3400 is good for solar imaging by cameras with very large sensor chips and can also be used for visual solar observing. The B3400 blocking filter is permanently installed inside the 2 inch R&P focuser. Common 2 inch star diagonals or other 2 inch accessories can be used. Observing the starry night sky: The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551430) the 3-lens apochromatic refractor can then be used as a normal telescope with 100 mm aperture and 714 mm focal length for observation and photography of the night sky. The FPL-53 triplet lens offers an outstandingly low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551430. Please note that the optionally available conversion kit 0551430 is absolutely necessary if the telescope should be used at night. More applications: With additionally available accessories the LS100MT offers even more possibilities! - Double-Stack The LS100MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is an internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Thus much more details on the solar surface will become visible. - Solar observing in White-Light If the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light. - Solar observing in Ca-K wavelength Certainly, the Ca-K filter modules from LUNT Solar Systems can also be used at the LS100MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun. This makes the LS100MT a completely universal usable apochromatic telescope of the highest quality! FEATURES 3-lens APO refractor, FPL-53 Aperture: 100 mm (no central obstruction) Focal length: 714 mm Bandwidth: internal Etalon with <0.7 Angstrom Tuning: air pressure tuning system Pressure-Tuner Blocking filter: B3400 with 2 inch connection Focuser: R&P with 10:1 reduction Two tube-ring with handle Sol-Searcher installed inside handle Dovetail bar at GP-level for astronomical mounts Weight: 6.8 kg Length with dew-shield: 78 cm Length with removed dew-shield: 65 cm SCOPE OF DELIVERY LS100MT Multipurpose Telescope Pressure-Tuner B3400 blocking filter installed inside focuser 2 inch R&P focuser with 10:1 reduction Tube rings with dovetail bar Transport case (78 x 33 x 23 cm) Instruction manual Conversion kit for observation of the starry night sky (0551430) not included!

Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 3-lens apochromatic telescope with FPL-51 glass, 130mm aperture and 910mm focal length - excellent image quality for H-Alpha solar observation and also for observing the starry sky at night. With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B3400 blocking filter. Solar observing in H-alpha: The LS130MT/B3400 is a complete telescope for observing the sun in H-alpha light, with 130mm free aperture (no central obstruction) and 910mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance. Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction. Blocking-filter is the B3400. The B3400 is good for solar imaging by cameras with very large sensor chips, and can also be used for visual observing. The B3400 blocking-filter is fix installed inside the 2 inch R&P focuser. Observing the starry night sky: The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. Then the 3-lens apochromatic refractor can be used as a normal telescope with 130mm aperture and 910mm focal length for observation and photography of the night sky. The FPL-51 triplet lens offers an outstandingly low colour aberration image. Common 2 inch star diagonals can be used at the R&P focuser of the telescope. Please note that the optionally available conversion kit 0551696 is absolutely necessary for the LS130MT version with B3400 blocking filter if the telescope is also to be used at night. The conversion kit is not required for the versions with B1200 and B1800. More applications: With additionally available accessories the LS130MT offers even more possibilities! - Double-Stack The LS130MT telescope can optionally be upgraded with the additionally available double-stack module LS130MT/DSII (item number 0551690). The DSII system is a internal double-stack module with Pressure-Tuner. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible. - Solar observing in White-Light If the H-alpha unit has been removed, of course either a sun filter can be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light. - Solar observing in Ca-K wavelengthThe additionally available "LUNT Ca-K Filter Module for LS130MT" (item number 0551697) can be used on the LS130MT to observe and photograph super-granulation and other effects visible at this wavelength on the sun. This makes the LS130MT a completely universal usable apochromatic telescope of highest quality! FEATURES 3-lens APO refractor, FPL-51 Aperture: 130mm (no central obstruction) Focal length: 910mm Bandwidth: internal Etalon with <0.7 Angstrom Tuning: air pressure tuning system Pressure-Tuner Blocking filter: B3400 with 2 inch connection Focuser: R&P with 10:1 reduction Two tube-ring with handle Sol-Searcher installed inside handle Dovetail bar at GP-level for astronomical mounts Weight: 12.1kg Length with dew-shield: 95cm Length removed dew-shield: 80cm SCOPE OF DELIVERY LS130MT Multipurpose Telescope Pressure-TunerB3400 blocking filter installed inside focuserTube extension for using without H-alpha Etalon 2 inch R&P focuser with 10:1 reduction Tube rings with dovetail bar Transport case (92 x 42 x 35 cm) Instruction manual

100mm H-alpha solar filter system with B600 blocking filter, for front mounting at telescopes with 1.25" focuser, and up to 540mm focal length.The LS100FHa H-alpha Etalon filter system with 100mm aperture for use on any refractor and many other telescopes. Because the LS100FHa has an estimated bandwidth of <0.7 Angstrom it is capable to providing high contrast views of both solar surface and edge detail (prominences).The system includes the B600 blocking filter, which is usable for telescopes up to 540mm focal length. Larger blocking filters suitable for longer focal length are also optional available. The blocking filter is installed in a 90° star diagonal for 1.25" focuser. This diagonal is equipped with a reception for 1.25" eyepieces and a T2 camera connection.Adding an additional available double-stack Etalon system will reduce the bandwidth to ~<0.5 Angstrom.FEATURESAperture: 100 mmBandwidth: <0.7 AngstromTuning: tiltable EtalonHousing diameter: 162 mmLength: 101 mmWeight: 2.75 kgFront thread: M120x1.5 female threadRear thread: M120x1.5 male thread Blocking filter: B600 in diagonal for 1.25" focuserMaximum focal length of telescope: 540 mmSCOPE OF DELIVERYLS100FHa solar filterB600 Blocking Filter (for 1.25" focuser) in star-diagonalTransport caseInstruction manual